From: Charlie W. <cha...@co...> - 2006-02-24 22:14:34
|
Thank you for your response. Just was is the "ini file" and how do you find it? I look in the EMC documentation but could find an answer. Charlie > Hi Charlie. > > It looks like emc thinks some limit switch someplace is telling the > machine not to move. Probably the position displays are dark red > rather than yellow or dark green. If that is the case, you should be > able to change the polarity of every limit variable in the ini file > and it should start. If you still have problems, send me a copy of > the ini file that you are using. There are some issues with trying to > run on laptops but I know of a few COMPAQs running emc okay. > > Ray > > > > Charlie White wrote: > >> I am using the EMC software on the CD that I purchased from SHERLINE >> to run an XYLOTEX three axis board. I made a cross over DB25 cable to >> connect my COMPAQ laptop to the board. I have check the cross over >> cable with the EMC documentation and with Jeff at XYLOTEX and feel >> the cross over cable is properly wired, at least there is no smoke. >> >> I am using the circle program from the SHERLINE documentation for >> EMC. With EMC in AUTO, BACKPLOT, and ESTOP RESET highlighted I click >> JOG X- or JOG X+, I get this error message: >> >> 1 - command (EMC_TASK_PLAN_RUN) cannot be executed until the machine >> is out of E-stop and turned on >> >> If I click the ESTOP RESET to deselect (grayed out), select MANUAL >> then click run I get this error message: >> >> 1 - command (EMC_AXIS_JOG) cannot be executed until the machine is >> out of E-stop and turned on >> >> The XYLOTEX board voltages are set to 3 and appears to function. >> >> What is going on? >> >> TIA >> >> Charlie White >> San Diego > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a groundbreaking scripting > language > that extends applications into web and mobile media. Attend the live > webcast > and join the prime developer group breaking into this new coding > territory! > http://sel.as-us.falkag.net/sel? > cmd=lnk&kid=110944&bid=241720&dat=121642 > _______________________________________________ > Emc-users mailing list > Emc...@li... > https://lists.sourceforge.net/lists/listinfo/emc-users > |