Hi,
I've got a real life problem and was wondering how this would be solved
using our (currently imaginary) embedlets.
The situation:
hardware: 6 X10 lamp switches, some X10 remotes, X10 gateway (CM11),
Couple of 1-Wire devices, some PIR motion sensors, handfull of TINIs, some
JStamps, one Sun Ultra10 (Solaris 9), a couple of PCs (WinXP Prof and
Linux) and a SaJe board, plenty of networking cable and hubs/switches
to connect everything equiped with RJ45s, a couple of J2ME phones, one
iMode phone.
software: all the development tools needed to create software for the
listed hardware. SUN ONE Application server (platform edition) & Directory
server. And everything legally available on the Internet of course...
goal:
- record the status of the X10 switches (according to the info provided
by the CM11 [all actions with remotes are available this way])
- present the current status of the X10 devices (on at xx% of max
capacity/off) to both J2ME and iMode (chtml can be used for browser as
well)
- detect arrival of 1-Wire ID on network (signals one of the PIR
detectors detected movement)
- store all state changes of X10 and 1-Wire in persistant storage for
reporting etc
In the (near) future a couple of 1-Wire temperature and/or humidity
sensors will be added to the setup and I want to extend the software to
control the X10 devices.
I've got code to sample all of the sensors at this moment and monitoring
infrastructure is up and running already, but a redesign is in order to
add the temperature sensors and X10 control, so I'm offering to become a
test site for our effords. (If you guys promise to behave I might even
allow remote access to the system :-) )
Regards,
Jac
--
Jac Kersing Technical Consultant The-Box Development
j.k...@th... http://www.the-box.com
|
