Menu

#20 support for C8051F531A

open
nobody
None
5
2009-03-09
2009-03-09
Anonymous
No

need support for C8051F531A

thanks
shay

//////////////////////////////////////////
linux-xjms:/home/shay/ec2drv # ec2device --port=USB
*********************************************************************
* WARNING: Auto detection of mode may cause initialisation sequence *
* to differ significantly from the SiLabs IDE. *
* In the case of problems specify --mode=C2 or --mode=JTAG *
*********************************************************************

0x0000, 0x0000
0x0000, 0x0000
0x045e, 0x0040
0x03f0, 0x0024
0x0000, 0x0000
ec2_GetDbgInfo(0x10c4,0x8044) 1
Found EC3 debugger
ec2_reset C2
EC3 debugger firmware version = 0x0c
unique_id=0xd7, rev=00
FOUND:

device : Unknown
mode : JTAG
Flash size = 0 bytes
Internal xram size = 512 bytes
External bus = No
Single lock addr = 0x0000
Flash sector size = 8196 bytes
Flash reserved top = 0x0000
Flash reserved bottom = 0x0000
Has Scratchpad = No
Has paged SFR = No
USB FIFO size = 0 bytes

Tested = No

Support for this device has not been fully tested or may not be complete
You can be of assistance, please visit:
http://sourceforge.net/tracker/?atid=775284&group_id=149627&func=browse
Please feel free to report your succcess / failure.
If there are any issues we can probably resolve them with your help since we don't have boards for every supported processor.
exiting now
disconnect done

Discussion


Log in to post a comment.

Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.