My ''96 RR was lifted up w/ the key in the ignition and doors locked while new rotors and pads were put in.After completion the vehicle was put on the ground but it won''t raise up.The mechanic fought it was ''cause of the bad LH front air spring, even though the system was working before the brake job.A new air spring was put in w/ the tailgate open and the key in the ignition to disable the EAS.The front of the truck is still at "access level" but the rear raised up.When the ignition is shut off the system goes to bump stop.No message appears on the message center.Please help!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
My ''96 RR was lifted up w/ the key in the ignition and doors locked while new rotors and pads were put in.After completion the vehicle was put on the ground but it won''t raise up.The mechanic fought it was ''cause of the bad LH front air spring, even though the system was working before the brake job.A new air spring was put in w/ the tailgate open and the key in the ignition to disable the EAS.The front of the truck is still at "access level" but the rear raised up.When the ignition is shut off the system goes to bump stop.No message appears on the message center.Please help!