Notice! Effective August 16, 2024, Intel will no longer use Sourceforge to distribute software for Ethernet products.
====================
Please refer to our GitHub location for future software updates here:
https://intel.github.io/ethernet-linux/
License
GNU General Public License version 2.0 (GPLv2)Follow Formerly Intel Ethernet Drivers
You Might Also Like
BrightGauge, a ConnectWise solution, was started in 2011 to fill a missing need in the small-to-medium IT Services industry: a better way to manage data and provide the value of work to clients. BrightGauge Software allows you to display all of your important business metrics in one place through the use of gauges, dashboards, and client reports. Used by more than 1,800 companies worldwide, BrightGauge integrates with popular business solutions on the market, like ConnectWise, Continuum, Webroot, QuickBooks, Datto, IT Glue, Zendesk, Harvest, Smileback, and so many more. Dig deeper into your data by adding, subtracting, multiplying, and dividing one metric against another. BrightGauge automatically computes these formulas for you. Want to show your prospects how quick you are to respond to tickets? Show off your data with embeddable gauges on public sites.
Rate This Project
Login To Rate This Project
User Reviews
-
Time to update the driver. Can't compile under new kernel branch 4.10. UPDATE. Finally!
-
Works just as well as you hoped it would. If, at your own risk, you want to support both 1Gb and 10Gb with SFP+ modules that have not been tested with both--and are not advertised to work with both--just make multispeed_fiber always true: --------------------- ixgbe/ixgbe-4.0.3/src/ixgbe_phy.c ---------------------- index 102dd53..a3e5f74 100644 @@ -1451,7 +1451,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_setup_needed = true; /* Determine if the SFP+ PHY is dual speed or not. */ - hw->phy.multispeed_fiber = false; + hw->phy.multispeed_fiber = true; if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && @@ -1771,7 +1771,7 @@ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_setup_needed = true; /* Determine if the QSFP+ PHY is dual speed or not. */ - hw->phy.multispeed_fiber = false; + hw->phy.multispeed_fiber = true; if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
-
I cannot comment on the driver as I could not get it work on Ubuntu. I thought i'd give it a go, even though I knew it wasn't apart of the supported list. Ubuntu 14.04, 3.13.0-24-generic kernel, Intel Corporation Ethernet Connection I217-V (rev 05). **UPDATE** Booting without the cable plugged in helped!
-
For older non-current CentOS boot kernel (such as 1 or 2 sub-revisions behind), you're forced to install the full-source CentOS linux kernel into /usr/src/linux. Cannot rely on 'kernel-devel' package then. Certainly, not Intel's fault. but it works very well.
-
Great stuff.