[Dxr3-devel] channels problem

[Wolf D. <dre...@ve...>]

Hello,

I found some issues mentioned in this list which=20
I experience with my vdr as well, looks as it=20
were the same thing:

I've got a c't-cdr 3.07 on Lorenzen budget and dxr3, with em8300-modules=
 0.14 :

http://www.heise.de/ct/ftp/projekte/vdr3/extradebs/em8300-modules-2.4.27-ctv=
dr-1_0.14.0-2+1_i386.deb

I used the channels.conf from the German=20
vdr-wiki, which contains the channels for DVB-T=20
Nuernberg (where I live). This works -but only=20
with one half of the channels - these:

ZDF:578000:I0B8C23D12M16T8G4Y0:T:27500:545:546:547:559:551:0:514:0:0:0
Info/3sat:578000:I0B8C23D12M16T8G4Y0:T:27500:561:562:567:0:515:0:0:0
Doku/KiKa:578000:I0B8C23D12M16T8G4Y0:T:27500:593:594:599:0:517:0:0:0
N24:626000:I0B8C23D0M64T8G8Y0:T:27500:225:226:231:0:16398:0:0:0
ProSieben:626000:I0B8C23D0M64T8G8Y0:T:27500:305:306:312:311:0:16403:0:0:0
kabel eins:626000:I0B8C23D0M64T8G8Y0:T:27500:161:162:167:0:16394:0:0:0
Sat.1:626000:I0B8C23D0M64T8G8Y0:T:27500:385:386:392:391:0:16408:0:0:0
hr-fernsehen:778000:I0B8C23D23M16T8G4Y0:T:27500:1041:1042:1044:0:65:0:0:0
BFS Nord:778000:I0B8C23D23M16T8G4Y0:T:27500:529:530:532:0:33:0:0:0
S=DCDWEST BW:778000:I0B8C23D23M16T8G4Y0:T:27500:3601:3602:3604:0:225:0:0:0
BR-alpha:778000:I0B8C23D23M16T8G4Y0:T:27500:561:562:564:0:35:0:0:0
Eurosport:786000:I0B8C23D12M16T8G4Y0:T:27500:577:578:583:0:16420:0:0:0
TELE 5:786000:I0B8C23D12M16T8G4Y0:T:27500:465:466:471:0:16413:0:0:0
=46ranken=20
=46ernsehen:786000:I0B8C23D12M16T8G4Y0:T:27500:2081:2082:2087:0:18562:0:0:0
RTL2:834000:I0B8C23D12M16T8G4Y0:T:27500:353:354:359:0:16406:0:0:0
Super RTL:834000:I0B8C23D12M16T8G4Y0:T:27500:433:434:439:0:16411:0:0:0
VOX:834000:I0B8C23D12M16T8G4Y0:T:27500:545:546:551:0:16418:0:0:0
RTL Television:834000:I0B8C23D12M16T8G4Y0:T:27500:337:338:343:0:16405:0:0:0




If I try to add these channels to my channels.conf:

Das Erste:184500:I0B7C23D0M64T8G8Y0:T:27500:513:514:516:0:32:0:0:0
arte:184500:I0B7C23D0M64T8G8Y0:T:27500:33:34:36:0:2:0:0:0
Phoenix:184500:I0B7C23D0M64T8G8Y0:T:27500:49:50:52:0:3:0:0:0
EinsPlus:184500:I0B7C23D0M64T8G8Y0:T:27500:97:98:516:0:6:0:0:0
Das Erste:184500:I0B7C34D12M16T8G4Y0:T:27500:513:514:516:0:32:0:0:0
arte:184500:I0B7C34D12M16T8G4Y0:T:27500:33:34:36:0:2:0:0:0
Phoenix:184500:I0B7C34D12M16T8G4Y0:T:27500:49:50:52:0:3:0:0:0
EinsPlus:184500:I0B7C34D12M16T8G4Y0:T:27500:97:98:516:0:6:0:0:0

the vdr gets stuck after the command /etc/init.d/ vdr start,

dmesg gives a message looking like this:

em8300_video.o: Video sysc rdptr is stuck at=20
0x00000....., wrptr 0x000......, left 250

As a man from the German vdr board has a similar=20
problem with his Lorenzen DVB-T-budget card (I've=20
got the same one), a suspect it might be an issue=20
with vertically and horizontally polarized=20
channels.

Is there a solution for this problem?

Sorry - I'm not an expert - I'd be extremely grateful for newbee-proof advic=
e.

Thanks and greetings,

Wolf