As I stated in the ticket, it is the latest (Windows) version (01/03/2019). I have already attached a .dxf file which crashes the program when run to generate .ngc file.Fuyun
On Thursday, January 3, 2019, 12:53:48 PM PST, Damian Wrobel dwrobel@users.sourceforge.net wrote:
Could you please provide a more detailed information:
which particular version (old, new),
backtrace (where it crashes),
if possible, attach a file (minimal version) which causes the software to crash.
Without that basic set of information it's quite difficult to guess where the problem might be.
That's probably something added by SF. Please have a look e.g. at the ticket#98 (your last post). There is also an "alternate" attachment. I'm sure you didn't attach it, do you?
Last edit: Damian Wrobel 2019-01-03
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
That's probably something added by SF. Please have a look e.g. at the ticket#98 (your last post). There is also an "alternate" attachment. I'm sure you didn't attach it, don't you?
This is the file. The program crashed when generating its .ngc file.Fuyun On Thursday, January 3, 2019, 3:13:38 PM PST, Fuyun Ling twinclouds@users.sourceforge.net wrote:
I did not see it either. It must got lost in the process. I will send another one later.Sorry for the confusion.
Fuyun
Sent from Yahoo Mail on Android
On Thu, Jan 3, 2019 at 2:25 PM, Damian Wrobeldwrobel@users.sourceforge.net wrote:
There is an attachment called "alternate".
That's probably something added by SF. Please have a look e.g. at the ticket#98 (your last post). There is also an "alternate" attachment. I'm sure you didn't attach it, don't you?
I've checked the Crash-Test.dxf file and it works for me:
You are using DXF2GCODE
Version Py3.6.7 PyQt5.10.1 ($Date: Thu Jan 3 16:29:29 2019 +0100 $)
For more information and updates visit: http://sourceforge.net/projects/dxf2gcode/
For Configuration files refer to folder:
/home/sw/.config/dxf2gcode
File: /home/sw/projects/dxf2gcode/dxf2gcode-sourcecode/dxf/Crash-Test.dxf selected
Loading file: /home/sw/projects/dxf2gcode/dxf2gcode-sourcecode/dxf/Crash-Test.dxf
Reading DXF Structure
Reading Block MODEL_SPACE; Nr: 0
Reading Block PAPER_SPACE; Nr: 1
Creating Contours of Block Nr: 0
Creating Contours of Block Nr: 1
Creating Contours of Entities
Loaded layers: 1
Loaded blocks: 2
Block 0 includes 0 Geometries, reduced to 0 Contours, used layers: []
Block 1 includes 0 Geometries, reduced to 0 Contours, used layers: []
Loaded 356 entity geometries; reduced to 97 contours; used layers: [0]; number of inserts 0
Drawing units: inches
TSP start values initialised for Layer 0
File: /home/sw/projects/dxf2gcode/dxf2gcode-sourcecode/dxf/Crash-Test selected
/home/sw/projects/dxf2gcode/dxf2gcode-sourcecode/dxf/Crash-Test
Export to FILE was successful
Please find the exported Crash-Test.ngc file attached.
Please also note that the file seems to not be perfect anyway, see the message from file import operation:
Lenght of some Elements too short
Length must be greater than tolerance.
Skipped Geometries
So, if it still crashes for you, please provide a backtrace and reopen.
Hi, Damian:I understand you can generate the .ngc file from my test .dxf file. Are you using the linux compilation or windows .msi implementation? I was using the windows version and got crashed. If you were using the linux version, can you test it on that platform again also? Thanks!Fuyun
On Friday, January 4, 2019, 2:45:21 AM PST, Damian Wrobel dwrobel@users.sourceforge.net wrote:
Still crash on my windows 10/64 bit. I tried older windows versions and nothing works.Fuyun
On Friday, January 4, 2019, 9:43:50 AM PST, Damian Wrobel dwrobel@users.sourceforge.net wrote:
I was using the windows version and got crashed. If you were using the linux version, can you test it on that platform again also?
I pasted output only from Linux but I tested it also on Windows 10 (using .msi installation) and it works for me fine on both platforms.
Could you please provide a more detailed information:
Without that basic set of information it's quite difficult to guess where the problem might be.
As I stated in the ticket, it is the latest (Windows) version (01/03/2019). I have already attached a .dxf file which crashes the program when run to generate .ngc file.Fuyun
On Thursday, January 3, 2019, 12:53:48 PM PST, Damian Wrobel dwrobel@users.sourceforge.net wrote:
Could you please provide a more detailed information:
Without that basic set of information it's quite difficult to guess where the problem might be.
[tickets:#103] New (01/03/2019) version crashes.
Status: New
Created: Thu Jan 03, 2019 08:35 PM UTC by Fuyun Ling
Last Updated: Thu Jan 03, 2019 08:35 PM UTC
Owner: nobody
The new version crashed when generating .ngc files frin .dxf files that had no problem with the older version.
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/dxf2gcode/tickets/103/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Related
Tickets:
#103But which is the old which works for you?
Unfortunately I don't see any attachments in this issue.
Please either attach a file or provide an accessible URL.
There is an attachment called "alternate". Ii did check it, but its not a dxf file, So please provide something else ...
regards
Christian
That's probably something added by SF. Please have a look e.g. at the ticket#98 (your last post). There is also an "alternate" attachment. I'm sure you didn't attach it, do you?
Last edit: Damian Wrobel 2019-01-03
I did not see it either. It must got lost in the process. I will send another one later.Sorry for the confusion.
Fuyun
Sent from Yahoo Mail on Android
On Thu, Jan 3, 2019 at 2:25 PM, Damian Wrobeldwrobel@users.sourceforge.net wrote:
There is an attachment called "alternate".
That's probably something added by SF. Please have a look e.g. at the ticket#98 (your last post). There is also an "alternate" attachment. I'm sure you didn't attach it, don't you?
[tickets:#103] New (01/03/2019) version crashes.
Status: New
Created: Thu Jan 03, 2019 08:35 PM UTC by Fuyun Ling
Last Updated: Thu Jan 03, 2019 10:19 PM UTC
Owner: nobody
The new version crashed when generating .ngc files frin .dxf files that had no problem with the older version.
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/dxf2gcode/tickets/103/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Related
Tickets:
#103This is the file. The program crashed when generating its .ngc file.Fuyun On Thursday, January 3, 2019, 3:13:38 PM PST, Fuyun Ling twinclouds@users.sourceforge.net wrote:
I did not see it either. It must got lost in the process. I will send another one later.Sorry for the confusion.
Fuyun
Sent from Yahoo Mail on Android
On Thu, Jan 3, 2019 at 2:25 PM, Damian Wrobeldwrobel@users.sourceforge.net wrote:
There is an attachment called "alternate".
That's probably something added by SF. Please have a look e.g. at the ticket#98 (your last post). There is also an "alternate" attachment. I'm sure you didn't attach it, don't you?
[tickets:#103] New (01/03/2019) version crashes.
Status: New
Created: Thu Jan 03, 2019 08:35 PM UTC by Fuyun Ling
Last Updated: Thu Jan 03, 2019 10:19 PM UTC
Owner: nobody
The new version crashed when generating .ngc files frin .dxf files that had no problem with the older version.
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/dxf2gcode/tickets/103/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
[tickets:#103] New (01/03/2019) version crashes.
Status: New
Created: Thu Jan 03, 2019 08:35 PM UTC by Fuyun Ling
Last Updated: Thu Jan 03, 2019 10:25 PM UTC
Owner: nobody
The new version crashed when generating .ngc files frin .dxf files that had no problem with the older version.
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/dxf2gcode/tickets/103/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Related
Tickets:
#103I've checked the Crash-Test.dxf file and it works for me:
You are using DXF2GCODE
Version Py3.6.7 PyQt5.10.1 ($Date: Thu Jan 3 16:29:29 2019 +0100 $)
For more information and updates visit:
http://sourceforge.net/projects/dxf2gcode/
For Configuration files refer to folder:
/home/sw/.config/dxf2gcode
File: /home/sw/projects/dxf2gcode/dxf2gcode-sourcecode/dxf/Crash-Test.dxf selected
Loading file: /home/sw/projects/dxf2gcode/dxf2gcode-sourcecode/dxf/Crash-Test.dxf
Reading DXF Structure
Reading Block MODEL_SPACE; Nr: 0
Reading Block PAPER_SPACE; Nr: 1
Creating Contours of Block Nr: 0
Creating Contours of Block Nr: 1
Creating Contours of Entities
Loaded layers: 1
Loaded blocks: 2
Block 0 includes 0 Geometries, reduced to 0 Contours, used layers: []
Block 1 includes 0 Geometries, reduced to 0 Contours, used layers: []
Loaded 356 entity geometries; reduced to 97 contours; used layers: [0]; number of inserts 0
Drawing units: inches
TSP start values initialised for Layer 0
File: /home/sw/projects/dxf2gcode/dxf2gcode-sourcecode/dxf/Crash-Test selected
/home/sw/projects/dxf2gcode/dxf2gcode-sourcecode/dxf/Crash-Test
Export to FILE was successful
Please find the exported Crash-Test.ngc file attached.
Please also note that the file seems to not be perfect anyway, see the message from file import operation:
So, if it still crashes for you, please provide a backtrace and reopen.
Last edit: Damian Wrobel 2019-01-04
Hi, Damian:I understand you can generate the .ngc file from my test .dxf file. Are you using the linux compilation or windows .msi implementation? I was using the windows version and got crashed. If you were using the linux version, can you test it on that platform again also? Thanks!Fuyun
On Friday, January 4, 2019, 2:45:21 AM PST, Damian Wrobel dwrobel@users.sourceforge.net wrote:
[tickets:#103] New (01/03/2019) version crashes.
Status: Invalid
Created: Thu Jan 03, 2019 08:35 PM UTC by Fuyun Ling
Last Updated: Fri Jan 04, 2019 10:09 AM UTC
Owner: nobody
The new version crashed when generating .ngc files frin .dxf files that had no problem with the older version.
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/dxf2gcode/tickets/103/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Related
Tickets:
#103I pasted output only from Linux but I tested it also on Windows 10 (using .msi installation) and it works for me fine on both platforms.
Still crash on my windows 10/64 bit. I tried older windows versions and nothing works.Fuyun
On Friday, January 4, 2019, 9:43:50 AM PST, Damian Wrobel dwrobel@users.sourceforge.net wrote:
I was using the windows version and got crashed. If you were using the linux version, can you test it on that platform again also?
I pasted output only from Linux but I tested it also on Windows 10 (using .msi installation) and it works for me fine on both platforms.
[tickets:#103] New (01/03/2019) version crashes.
Status: Invalid
Created: Thu Jan 03, 2019 08:35 PM UTC by Fuyun Ling
Last Updated: Fri Jan 04, 2019 10:45 AM UTC
Owner: nobody
The new version crashed when generating .ngc files frin .dxf files that had no problem with the older version.
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/dxf2gcode/tickets/103/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Related
Tickets:
#103Fuyun: One issue I had was discussed in my posting here. Is this problem have been solved? Thanks.
|
|
| |
Google Groups
Google Groups allows you to create and participate in online forums and email-based groups with a rich experienc...
|
|
|
Fuyun
On Friday, January 4, 2019, 9:43:50 AM PST, Damian Wrobel dwrobel@users.sourceforge.net wrote:
I was using the windows version and got crashed. If you were using the linux version, can you test it on that platform again also?
I pasted output only from Linux but I tested it also on Windows 10 (using .msi installation) and it works for me fine on both platforms.
[tickets:#103] New (01/03/2019) version crashes.
Status: Invalid
Created: Thu Jan 03, 2019 08:35 PM UTC by Fuyun Ling
Last Updated: Fri Jan 04, 2019 10:45 AM UTC
Owner: nobody
The new version crashed when generating .ngc files frin .dxf files that had no problem with the older version.
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/dxf2gcode/tickets/103/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Related
Tickets:
#103