[Dri-users] Re: DRI on FreeBSD 4.4: Newbie Help

[Shanker B. <sh...@ex...>]

Hello:

jo...@cr... wrote,
> Grab the drm-kmod-0.9.3.tar.gz off of Eric Anholt's site.
> 
> http://gladstone.uoregon.edu/~eanholt/dri/drm-kmod-0.9.3.tar.gz
> 
> it has some changes that help the r128 greatly.

drm-kmod-0.9.3 fixed 2D rendering and glxgears now shows 611fps. Wheee!
How come the fixes in drm-kmod-0.9.3 are not in the DRI CVS FreeBSD
branch?

The install guide talks of a "/usr/local/etc/rc.d/drm.sh.sample" which i
think is part of the graphics/drm-kmod port. This is not there in the
drm-kmod-0.9.3 tarball. Can anyone send me a copy of the same?

> I'm curious as to what agp chipset your motherboard uses. I have
> access to several k7 motherboards that choke with drivers that need
> AGP, though have no problem with tdfx hardware.

Its a VIA KT133 chipset.

> What does the "agp0" line from dmesg say the chipset is?

bash-2.05$ dmesg|grep agp
Preloaded elf module "agp.ko" at 0xc04e009c.
agp0: <VIA Generic host to PCI bridge> mem 0xd4000000-0xd5ffffff at
device 0.0 on pci0

bash-2.05$ dmesg|grep drm
info: [drm] Checking PCI vendor=4098, device=21062
drm0: <ATI Rage 128 GL (AGP 2x)> port 0xc000-0xc0ff mem
0xd7000000-0xd7003fff,0x
d0000000-0xd3ffffff irq 9 at device 0.0 on pci1
info: [drm] AGP at 0xd4000000 32MB
info: [drm] Initialized r128 3.0.0 20010405 on minor 0

Thank a lot for your time.

-- Shanu

-- 
Han Solo:
	You said you wanted to be around when I made a mistake,
	well, this could be it, sweetheart.
Princess Leia:
	I take it back.