[Dri-users] /dev/dri (cont.)

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

hi, I already sent a mail, but this one will have a little more info to
back it up.

to briefly restate:
I downloaded the latest dri source from the cvs, compiled installed, put
everything in the right place, edited my xf86config, and so on.  I am
using kernel 2.4.2, and x 4.0.  glx loads fine, but dri fails to.  I have
also noticed that I do not have the /dev/dri device which I have read of
in several help files.  Could this be a problem, and how do I correctly
set up the device and the mentioned device files?  Here is a log of my x
startup:

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.0.99.2 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 6 April 2001
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.2 i686 [ELF] 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Apr 20 23:33:33 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "Laptop"
(**) |   |-->Device "ATI"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6-DRI/lib/modules"
(--) using VT number 7

(II) Loading /usr/X11R6-DRI/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) Loading /usr/X11R6-DRI/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 0.1.0
(II) Loading /usr/X11R6-DRI/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 0.1.0
(II) Unloading /usr/X11R6-DRI/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) ATI Mach64 LM rev 100, Mem @ 0xf5000000/24,
0xf4200000/12, I/O @ 0x9000/8
(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) Loading /usr/X11R6-DRI/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) Loading /usr/X11R6-DRI/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.1.9
(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) Loading /usr/X11R6-DRI/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) Loading /usr/X11R6-DRI/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 6.3.1
(II) Loading /usr/X11R6-DRI/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) ATI: ATI driver (version 6.3.1) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
        ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK
(PCI),
        ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
        ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
        ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
        ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP)
(II) Loading /usr/X11R6-DRI/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 6.3.1
(==) ATI(0): Chipset:  "ati".
(**) ATI(0): Depth 24, (--) framebuffer bpp 32
(II) Loading /usr/X11R6-DRI/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading /usr/X11R6-DRI/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) Loading /usr/X11R6-DRI/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE DDC supported
(--) ATI(0): ATI 3D Rage Mobility graphics controller detected.
(--) ATI(0): Chip type 4C4D "LM", version 4, foundry TSMC, class 0,
revision 0x01.
(--) ATI(0): AGP bus interface detected;  block I/O base is 0x9000.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(--) ATI(0): 1024x768 panel (ID 6) detected.
(--) ATI(0): Panel model LG LP141X2-A.
(--) ATI(0): Panel clock is 65.146 MHz.
(II) ATI(0): Using digital flat panel interface.
(II) ATI(0): Storing hardware cursor image at 0xF57FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xF5000000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
 due to linear aperture size and/or placement of hardware cursor image
area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xF4200400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xF4200000.
(==) ATI(0): Write-combining range (0xf5000000,0x800000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 29.500 MHz.
(II) ATI(0): Maximum clock: 230.00 MHz
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) ATI(0): Not using built-in mode "Native panel mode" (hsync out of
range)
(II) ATI(0): Not using mode "1280x1024" (no mode of this name)
(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
(**) ATI(0): Default mode "1024x768": 65.1 MHz, 48.5 kHz, 60.8 Hz
(**) ATI(0): Default mode "640x480": 65.1 MHz, 48.5 kHz, 61.9 Hz
(**) ATI(0): Default mode "800x600": 65.1 MHz, 48.2 kHz, 61.2 Hz
(**) ATI(0): Default mode "1024x768": 65.1 MHz, 47.3 kHz, 59.3 Hz
(==) ATI(0): DPI set to (75, 75)
(II) Loading /usr/X11R6-DRI/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(II) Loading /usr/X11R6-DRI/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 0.1.0
(II) Loading /usr/X11R6-DRI/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.0.99.2, module version = 1.0.0
(--) Depth 24 pixmap format is 32 bpp
(==) ATI(0): Write-combining range (0xf5000000,0x800000)
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                10 256x256 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(WW) ATI(0): Option "AGPMode" is not used
(WW) ATI(0): Option "UseCCEFor2D" is not used
(**) Mouse1: Protocol: "PS/2"
(**) Mouse1: Core Pointer
(==) Mouse1: Buttons: 3
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/,
removing from list!
0
0
0
0
KCharset: Wrong charset!

thanks a lot guys.
chris