From: Daryll S. <da...@va...> - 2001-03-25 01:07:08
|
On Sat, Mar 24, 2001 at 05:44:18PM -0700, Shaun Kruger wrote: > I still seem to be having trouble with getting my DRI to work. I have a > Voodoo 3 and from all that I have seen the things I have done should work. > I have the DRI modules inserted into /lib/modules/2.4.2 and so on so I > know I'm using the right tdfx.o. I can still only get software rendering > working with the libGL from the Debian testing archive. Any libGL that I > compile with my DRI will die with a seg fault that is attributed to glide > 3. I made sure I had the latest Glide from CVS and the latest DRI from > CVS, both were known as working for other people. I also have the latest > stable kernel. What else is there to get DRI working? My system is a > Debian testing (was unstable for a while). I would like to make use of my > 3D hardware, but I spent a good week or so on it a while ago and I had > gotten no where. > /dev/dri/card0 is chmod 666 > I am running with a full DevFS > I really can't think of what is missing and keeping my system from > working. > Included is the output of glxinfo in glxinfo.dump.err. > The glide library file has a creation time of 5 minutes ago. I also hand > installed libGL.so.1.2 from my DRI build tree. I have killed every > library I had any question about needing and it still dies. > > There is something I am missing, what is it? Are you sure you compiled glide for us with the DRI and not stand alone? setenv LIBGL_DEBUG and see what gets printed when gears starts up. - |Daryll |