[Bug 18048] radeonhd: drmOpen("radeon",..) fails in RHDDRIVersionCheck [ GeCube Radeon HD 3650 1GB / RX365PA2-F3 S1H]

[<bug...@fr...>]

http://bugs.freedesktop.org/show_bug.cgi?id=18048


Oswald Maenner <osw...@re...> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |osw...@re...




--- Comment #3 from Oswald Maenner <osw...@re...>  2008-10-14 11:01:57 PST ---
The
  udevadm trigger --verbose --subsystem-match=drm
did not help.

I also tried to add 
  alias char-major-226 radeon
to a file in /etc/modprobe.d, and also created a device manually by
  mknod /dev/dri/card0 c 226 0

However the device vanished as soon as I started X, and drmOpen still fails.

In the Xorg.0.log there is also the message

(II) RADEONHD(0): Unknown card detected: 0x9596:0x18BC:0x0028.
        If - and only if - your card does not work or does not work optimally
        please contact rad...@op... to help rectify this.
        Use the subject: 0x9596:0x18BC:0x0028: <name of board>
        and *please* describe the problems you are seeing
        in your message.
(--) RADEONHD(0): Detected an RV635 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xd0020000 to 0xb7937000 (size 0x00010000)
(II) RADEONHD(0): AGP Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
        SubsystemVendorID: 0x18bc SubsystemID: 0x0028
        IOBaseAddress: 0xc000
        Filename: SV27625.bin
        BIOS Bootup Message:
RX365PA2-F3 S1H

Would it be possible to get 3D accel at least partially working by defining a
similar supported RV635 card type in the xorg.conf, and if yes, where can I
find a list of suitable similar cards and the definition to put into xorg.conf?

Thanks,

Oswald


-- 
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.