From: Luca <luc...@li...> - 2006-10-26 11:10:32
|
Hi, I have alwayls post this problem on dri-users. I have Mach64 chipset and FC5; I compile the libdrm and module for 2.6.17-2187 kernel. I compiled only libdrm and drm module, not Mesa. Compilation finish succesfully, but when I restart xorg, I have this error on the kernel output: [drm:mach64_dma_init] *ERROR* mach64_dma_init called without lock held, held 0 owner 00000000 c74358e0 [drm:drm_unlock] *ERROR* Process 3216 using kernel context 0 and this: (II) ATI(0): [drm] SAREA 2200+1208: 3408 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 6, (OK) drmOpenByBusid: drmOpenMinor returns 6 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) ATI(0): [drm] DRM interface version 1.3 (II) ATI(0): [drm] created "mach64" driver at busid "pci:0000:01:00.0" (II) ATI(0): [drm] added 8192 byte SAREA at 0xd0975000 (II) ATI(0): [drm] mapped SAREA 0xd0975000 to 0xb7655000 (II) ATI(0): [drm] framebuffer handle = 0xfd000000 (II) ATI(0): [drm] added 1 reserved context for kernel (EE) ATI(0): [dri] ATIDRIScreenInit failed because of a version mismatch. [dri] mach64.o kernel module version is 2.0.0, but version 1.0 or greater is needed. [dri] Disabling DRI. (II) ATI(0): [drm] removed 1 reserved context for kernel (II) ATI(0): [drm] unmapping 8192 bytes of SAREA 0xd0975000 at 0xb7655000 in the Xorg's log. Can I modify the version from 2.0.0 to 2.0? Is possible? How I do?I try to watch the source code but I don't find any infos. My lspci -v information about Videocard is: 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) (prog-if 00 [VGA]) Subsystem: NEC Corporation Unknown device 80b7 Flags: bus master, stepping, medium devsel, latency 66, IRQ 5 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] I/O ports at 2000 [size=256] Memory at fc100000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 28000000 [disabled] [size=128K] Capabilities: [50] AGP version 1.0 Capabilities: [5c] Power Management version 1 Tell me, if you need some information. What i try to do? help me. thank you. bye. Luca -- Luca 'whitenoise' Foppiano PGP FP: F75D 7A82 B1A1 8E1C 0FBF 70E7 3519 62A5 2224 1766 blog: http://bayzone.wordpress.com |