From: Lorenzo C. <lo...@co...> - 2005-06-18 07:51:59
|
Jon Smirl wrote: >>When I first boot it's fine, but when the laptop comes back from S3, >>even if everything else works, the serial console just prints a couple >>of characters of garbage and then dies. :( > > The serial line is probably coming back at the default baud rate and > you were setting it higher when you were testing it. That might be, but this happened both when booting with "console=ttyS0,115200n8" and with "console=ttyS0", which I assumed should set it to the default rate. I altro tried to see if writing to the port would get it working again, e.g. as reported here: http://www.ussg.iu.edu/hypermail/linux/kernel/0502.0/1030.html but that didn't work either. Cheers, Lorenzo |