Menu
▾
▴
Re: [Dri-users] Voodoo3 xorg 7 modular and acceleration.
|
From: Richard H. <heb...@ea...> - 2006-07-30 20:24:45
|
Thank you Felix I got the x part done but i was in the middle of a kde recompile .. it it will take quite a few hours to finish that step .. :| I will send a new post as soon as i am done with the upgrades. Again thanks. Ric Felix Kühling wrote: > Am Sonntag, den 30.07.2006, 12:20 +0000 schrieb Richard Hebert: >> thanks for answering : >> >> First example : this is BillardGL >> >> ric@ric ~ $ LIBGL_DEBUG=verbose /usr/games/bin/BillardGL >> >> BillardGL (C) 2001, 2002 Tobias Nopper, Stefan Disch, Martina Welte >> >> libGL: XF86DRIGetClientDriverName: 1.1.1 tdfx (screen 0) >> libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tdfx_dri.so >> libGL error: XF86DRIQueryDirectRenderingCapable returned false >> drmOpenByBusid: Searching for BusID pci:0000:01:00.0 >> drmOpenDevice: node name is /dev/dri/card0 >> drmOpenDevice: open result is 5, (OK) >> drmOpenByBusid: drmOpenMinor returns 5 >> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 >> libGL warning: 3D driver claims to not support visual 0x25 >> libGL warning: 3D driver claims to not support visual 0x26 >> libGL warning: 3D driver claims to not support visual 0x29 >> libGL warning: 3D driver claims to not support visual 0x2a >> libGL warning: 3D driver claims to not support visual 0x2d >> libGL warning: 3D driver claims to not support visual 0x2e >> libGL warning: 3D driver claims to not support visual 0x31 >> libGL warning: 3D driver claims to not support visual 0x32 >> libGL warning: 3D driver claims to not support visual 0x35 >> libGL warning: 3D driver claims to not support visual 0x36 >> libGL warning: 3D driver claims to not support visual 0x39 >> libGL warning: 3D driver claims to not support visual 0x3a >> libGL warning: 3D driver claims to not support visual 0x3d >> libGL warning: 3D driver claims to not support visual 0x3e >> libGL warning: 3D driver claims to not support visual 0x41 >> libGL warning: 3D driver claims to not support visual 0x42 >> libGL error: >> Can't open configuration file /etc/drirc: No such file or directory. >> libGL error: >> Can't open configuration file /home/ric/.drirc: No such file or directory. >> libGL: using Glide library libglide3-v3.so >> Segmentation fault >> >> The process is about one second total .. > > Aha. From your original email the failure mode was completely unclear. I > thought you meant direct rendering doesn't work and it falls back to > indirect rendering. But the application is actually crashing. That's an > important detail. ;-) It sounds like a bug in the 3D driver. > > Could you try Xorg 7.1 and Mesa 6.5 as well? I believe this should be > available in Gentoo. If the problem persist, could you enter a bug > report in bugzilla for this? http://bugs.freedesktop.org. Report it > against Mesa, component Drivers/DRI/TDFX. > > A backtrace would probably help the investigation of the problem. Enable > core dumps before running the application: > > ulimit -c unlimited > > Then run the application. It should produce a file called core in the > current directory. Then run gdb -c core <path to application>. Now you > can examine the conditions of the segmentation fault. To get a backtrace > enter "bt" at the gdb prompt. It's most useful if Mesa is built with > debugging information. Post or attach the output to the bug report. > > Regards, > Felix > >> TuxRacer .. : >> >> ric@ric ~ $ LIBGL_DEBUG=verbose tuxracer >> Tux Racer 0.61 -- a Sunspire Studios Production >> (http://www.sunspirestudios.com) >> (c) 1999-2000 Jasmin F. Patry <jf...@su...> >> "Tux Racer" is a trademark of Jasmin F. Patry >> Tux Racer comes with ABSOLUTELY NO WARRANTY. This is free software, >> and you are welcome to redistribute it under certain conditions. >> See http://www.gnu.org/copyleft/gpl.html for details. >> >> libGL: XF86DRIGetClientDriverName: 1.1.1 tdfx (screen 0) >> libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tdfx_dri.so >> libGL error: XF86DRIQueryDirectRenderingCapable returned false >> drmOpenByBusid: Searching for BusID pci:0000:01:00.0 >> drmOpenDevice: node name is /dev/dri/card0 >> drmOpenDevice: open result is 5, (OK) >> drmOpenByBusid: drmOpenMinor returns 5 >> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 >> libGL warning: 3D driver claims to not support visual 0x25 >> libGL warning: 3D driver claims to not support visual 0x26 >> libGL warning: 3D driver claims to not support visual 0x29 >> libGL warning: 3D driver claims to not support visual 0x2a >> libGL warning: 3D driver claims to not support visual 0x2d >> libGL warning: 3D driver claims to not support visual 0x2e >> libGL warning: 3D driver claims to not support visual 0x31 >> libGL warning: 3D driver claims to not support visual 0x32 >> libGL warning: 3D driver claims to not support visual 0x35 >> libGL warning: 3D driver claims to not support visual 0x36 >> libGL warning: 3D driver claims to not support visual 0x39 >> libGL warning: 3D driver claims to not support visual 0x3a >> libGL warning: 3D driver claims to not support visual 0x3d >> libGL warning: 3D driver claims to not support visual 0x3e >> libGL warning: 3D driver claims to not support visual 0x41 >> libGL warning: 3D driver claims to not support visual 0x42 >> libGL error: >> Can't open configuration file /etc/drirc: No such file or directory. >> libGL error: >> Can't open configuration file /home/ric/.drirc: No such file or directory. >> libGL: using Glide library libglide3-v3.so >> Fatal signal: Segmentation Fault (SDL Parachute Deployed) >> >> now that SDL is something i hadnt seen before .. all the same >> tuxracer starts and as soon as i click the first time to start >> then the program stops and returns the error message. >> >> I tried the LD_PRELOAD with the same results though i had to >> change the path to reflect the installation : >> >> >> ric@ric ~ $ LD_PRELOAD=/usr/lib/opengl/xorg-x11/lib/libGL.so.1.2 >> /usr/games/bin/BillardGL >> >> BillardGL (C) 2001, 2002 Tobias Nopper, Stefan Disch, Martina Welte >> >> libGL warning: 3D driver claims to not support visual 0x25 >> libGL warning: 3D driver claims to not support visual 0x26 >> libGL warning: 3D driver claims to not support visual 0x29 >> libGL warning: 3D driver claims to not support visual 0x2a >> libGL warning: 3D driver claims to not support visual 0x2d >> libGL warning: 3D driver claims to not support visual 0x2e >> libGL warning: 3D driver claims to not support visual 0x31 >> libGL warning: 3D driver claims to not support visual 0x32 >> libGL warning: 3D driver claims to not support visual 0x35 >> libGL warning: 3D driver claims to not support visual 0x36 >> libGL warning: 3D driver claims to not support visual 0x39 >> libGL warning: 3D driver claims to not support visual 0x3a >> libGL warning: 3D driver claims to not support visual 0x3d >> libGL warning: 3D driver claims to not support visual 0x3e >> libGL warning: 3D driver claims to not support visual 0x41 >> libGL warning: 3D driver claims to not support visual 0x42 >> Segmentation fault >> >> That is the two apps i tried up to now on this new install. >> Hope this helps >> >> Ric >> >> >> >> >> Felix Kühling wrote: >>> Am Sonntag, den 30.07.2006, 07:38 +0000 schrieb Richard Hebert: >>>> Good Morning >>>> >>>> Im at the end of the road here .. I searched and tried so many >>>> things to get the GL programs to run on the voodoo3 that im in >>>> a fog what to try next. >>>> >>>> The setup is this : i got two voodoo3 cards one agp and one pci >>>> The cpu is an athlon XP 2400 on a elite k7s5a pro mobo. >>>> This setup worked just fine with xorg 6.8.2 acceleration on the >>>> voodoo 3 agp worked and all looked fine.Games like TuxRacer did >>>> work with nice smooth running graphics. glxgears reported 1350 >>>> fps or so and all in all .. was performing nicely for a card >>>> that age.I never had accel on the pci card working and did not >>>> expect/needed it so this second card has never been an issue. >>>> >>>> ric ric # xdriinfo >>>> Screen 0: tdfx >>>> Screen 1: not direct rendering capable. >>>> >>>> This seems totally normal. >>>> So on to >>>> >>>> ric ric # LIBGL_DEBUG=verbose glxinfo >>>> name of display: :0.0 >>>> libGL: XF86DRIGetClientDriverName: 1.1.1 tdfx (screen 0) >>>> libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tdfx_dri.so >>>> libGL error: XF86DRIQueryDirectRenderingCapable returned false >>>> drmOpenByBusid: Searching for BusID pci:0000:01:00.0 >>>> drmOpenDevice: node name is /dev/dri/card0 >>>> drmOpenDevice: open result is 4, (OK) >>>> drmOpenByBusid: drmOpenMinor returns 4 >>>> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 >>>> libGL warning: 3D driver claims to not support visual 0x25 >>>> libGL warning: 3D driver claims to not support visual 0x26 >>>> libGL warning: 3D driver claims to not support visual 0x29 >>>> libGL warning: 3D driver claims to not support visual 0x2a >>>> libGL warning: 3D driver claims to not support visual 0x2d >>>> libGL warning: 3D driver claims to not support visual 0x2e >>>> libGL warning: 3D driver claims to not support visual 0x31 >>>> libGL warning: 3D driver claims to not support visual 0x32 >>>> libGL warning: 3D driver claims to not support visual 0x35 >>>> libGL warning: 3D driver claims to not support visual 0x36 >>>> libGL warning: 3D driver claims to not support visual 0x39 >>>> libGL warning: 3D driver claims to not support visual 0x3a >>>> libGL warning: 3D driver claims to not support visual 0x3d >>>> libGL warning: 3D driver claims to not support visual 0x3e >>>> libGL warning: 3D driver claims to not support visual 0x41 >>>> libGL warning: 3D driver claims to not support visual 0x42 >>>> libGL error: >>>> Can't open configuration file /etc/drirc: No such file or directory. >>>> libGL error: >>>> Can't open configuration file /root/.drirc: No such file or directory. >>>> libGL: using Glide library libglide3-v3.so >>>> display: :0 screen: 0 >>>> direct rendering: Yes >>> [snip] >>> >>>> display: :0 screen: 1 >>>> direct rendering: No >>> [snip] >>> >>>> Now there is a libGL error there .. ( cant find a thing >>>> about it on the net either .. tried googling 0 results >>> The "claims not to support visual" messages are annoying but essentially >>> harmless. Just a minor misunderstanding between 2D and 3D driver. >>> Someone should fix this, though. >>> >>>> but the >>>> display: :0 screen: 0 >>>> direct rendering: Yes >>>> >>>> is a bit confusing ,tells me it works .. so .. on i go .. >>>> >>>> glxgears on the display 0 screen 0 shows 1350 fps or so .. >>>> again looks good to me . >>>> >>>> I dont get it . >>>> Why would apps not work but glxgears would ? >>> Which apps don't work. Could you show us the output of >>> >>> LIBGL_DEBUG=verbose your_application >>> >>> Just a guess, but does it help if you start the application like this: >>> >>> LD_PRELOAD=/usr/lib/libGL.so.1 your_application >>> >>> If this works, it's a known problem and considered a bug in certain >>> applications loading libGL dynamically. A workaround is being worked on. >>> >>> Regards, >>> Felix >>> >>>> Im getting more and more confused .. i tried all available >>>> versions of glide-v3 , tried x11-drm in the kernel and as >>>> a package , did and redid the config using Xorg -configure >>>> , swapped that for my old xorg.conf , recompiled xorg-x11 .. >>>> in two words .. im stomped. >>>> Oh i reinstalled the whole distro with an older version of >>>> gcc .. same result.Im on this installation atm. >>>> >>>> I tried on Gentoo forums , left a bug report on xorg >>>> and on gentoo ( which escalated to xorg ) and tried for >>>> weeks now to get it working. >>>> >>>> If anyone has an idea on how to further investigate >>>> and correct this , please let me know. >>>> >>>> Thank you >>>> >>>> >>>> Richard Hebert >>>> >> >> ------------------------------------------------------------------------- >> Take Surveys. Earn Cash. Influence the Future of IT >> Join SourceForge.net's Techsay panel and you'll get the chance to share your >> opinions on IT & business topics through brief surveys -- and earn cash >> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV >> -- >> _______________________________________________ >> Dri-users mailing list >> Dri...@li... >> https://lists.sourceforge.net/lists/listinfo/dri-users |