From: <il...@il...> - 2001-10-08 02:11:35
|
On Mon, Oct 08, 2001 at 01:56:28AM +0200, Michel D=E4nzer wrote: > On Sun, 2001-10-07 at 23:44, Dagfinn Ilmari Manns=E5ker wrote: >=20 > > I am very keen on getting DRI up and running on this machine, and I > > will assist with any tests and/or troubleshooting you find necessary, > > just give me the instructions. >=20 > Have you followed the DRI User Guide? There are quite a few things that > can prevent direct rendering. Have you looked through the server log > carefully? Yes, I have followed the DRI User Guide (without knowing it. I read through it, and I have done exactly as it said). From looking at the log, I can't s= ee what would cause direct rendering to fail. The parts of the log relevant to the card are: [ scanpci output: ] (--) PCI:*(1:0:0) ATI Rage 128 Mobility LF rev 2, Mem @ 0xf4000000/26, 0xfdffc000/14, I/O @ 0xec00/8 [ snip ] (--) Chipset ATI Rage 128 Mobility LF (AGP) found [ snip ] (II) R128(0): PCI bus 1 card 0 func 0 (**) R128(0): Depth 16, (--) framebuffer bpp 16 (II) R128(0): Pixel depth =3D 16 bits stored in 2 bytes (16 bpp pixmaps) (=3D=3D) R128(0): Default visual is TrueColor (=3D=3D) R128(0): RGB weight 565 (II) R128(0): Using 6 bits per RGB (8 bit DAC) (II) R128(0): initializing int10 (II) R128(0): Primary V_BIOS segment is: 0xc000 (--) R128(0): Chipset: "ATI Rage 128 Mobility LF (AGP)" (ChipID =3D 0x4c46) (--) R128(0): Linear framebuffer at 0xf4000000 (--) R128(0): MMIO registers at 0xfdffc000 (--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1) (**) R128(0): Using flat panel for display (II) R128(0): Panel size: 1400x1050 (II) R128(0): Panel ID: Samsung LTN141P2 (II) R128(0): Panel Type: Color, Single, TFT (II) R128(0): Panel Interface: LVDS (II) R128(0): PLL parameters: rf=3D2700 rd=3D12 min=3D12500 max=3D25000; xc= lk=3D10500 (II) R128(0): VESA BIOS detected (II) R128(0): VESA VBE DDC supported (**) R128(0): Using gamma correction (0.7, 0.7, 0.7) (II) R128(0): 14.1in TFT: Using hsync range of 31.50-80.00 kHz (II) R128(0): 14.1in TFT: Using vrefresh range of 40.00-80.00 Hz (II) R128(0): Clock range: 12.50 to 250.00 MHz [ snip ] (=3D=3D) R128(0): Write-combining range (0xf4000000,0x800000) (WW) R128(0): Static buffer allocation failed -- need at least 8663 kB video memory (II) R128(0): Memory manager initialized to (0,0) (1408,2978) (II) R128(0): Reserved area from (0,1050) to (1408,1052) (II) R128(0): Largest offscreen area available: 1408 x 1926 (=3D=3D) R128(0): Backing store disabled (=3D=3D) R128(0): Silken mouse enabled (II) R128(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Dashed Lines Scanline Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 13 256x256 slots 5 512x512 slots (II) R128(0): Acceleration enabled (II) R128(0): Using hardware cursor (scanline 2104) (II) R128(0): Largest offscreen area available: 1408 x 1924 (II) R128(0): Direct rendering disabled I have tried with 24bpp too, with the same result. --=20 Dagfinn I. Manns=E5ker GPG Public Key ID: 0x51ECFAC6 Fingerprint: 48BB A64D CE9B 9A06 65DF 395C D42E CDC4 51EC FAC6 |