From: Alex D. <ale...@gm...> - 2005-01-04 15:41:27
|
On Tue, 04 Jan 2005 01:09:39 -0500, Juan Luis Baptiste <ju...@ma...> wrote: > On Monday 03 January 2005 09:40, Alex Deucher wrote: > > > > rv200 3D support is seems to have some issues at the moment; I'm not > > sure why. You may want to try an older radeon_dri.so. > > > > I removed all of the xorg 6.8.1 rpm's and installed the 6.7.0 ones, but now > DRI isn't getting enabled, but the logs say it is: > > [juancho@laptop juancho]$ grep enabled /var/log/Xorg.0.log > (II) RADEON(0): Acceleration enabled > (==) RADEON(0): Silken mouse enabled > (**) RADEON(0): DPMS enabled > (II) RADEON(0): Direct rendering enabled > > but glxinfo says direct rendering: No. > > I followed again all of the troubleshooting guide on the wiki but it wasn't of > any help. The only weird thing I see now is this, but I'm not sure if it was > also present with xorg 6.8.1: > > (WW) RADEON(0): Failed to set up write-combining range (0xe8000000,0x1000000) > > Hints? it's probably a libexpat or libGL problem. make sure you don't have old copies floating around. As per this page: http://dri.freedesktop.org/wiki/DriTroubleshooting Try setting the environment variable LIBGL_DEBUG to verbose and then run glxinfo. ALex > > Cheers, > -- > Juan Luis Baptiste > http://www.merlinux.org > http://knetworkconf.sf.net > > ------------------------------------------------------- > The SF.Net email is sponsored by: Beat the post-holiday blues > Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. > It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt > -- > _______________________________________________ > Dri-users mailing list > Dri...@li... > https://lists.sourceforge.net/lists/listinfo/dri-users > |