From: Felix <fx...@gm...> - 2002-12-05 10:10:21
|
On Thu, 5 Dec 2002 10:42:08 +0100 Oskar Börjesson <osk...@kt...> wrote: > Hi again, I have undone everything I did when I installed utah-glx, but there > are still a module loaded in my logfile (libglx.so) so I moved it, and now > its not loaded anymore. I have been unable to find a replacement for this > file so now I dont load it at all. I still get direct rendering :no in > glxinfo. Then I installed xlibmesa3 with apt-get (reinstall). When I > installed Utah-glx it was not with a debian pacakge.Now glxgears loads, but > my guess its in software mode. There are still tons of errors in > /var/log/XFree86.0.log: > > XFree86 Version 4.2.1 (Debian 4.2.1-3 20021016191246 br...@de...) / > X Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 3 September 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: Linux 2.4.18 i686 [ELF] [... skipping ...] > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is -1, (No such device) > drmOpenDevice: Open failed > drmOpenDevice: minor is 0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 5, (OK) > drmGetBusid returned '' > (II) I810(0): [drm] loaded kernel module for "i810" driver > (II) I810(0): [drm] created "i810" driver at busid "PCI:0:2:0" > (II) I810(0): [drm] added 8192 byte SAREA at 0xc8911000 > (II) I810(0): [drm] mapped SAREA 0xc8911000 to 0x40014000 > (II) I810(0): [drm] framebuffer handle = 0xd0000000 > (II) I810(0): [drm] added 1 reserved context for kernel > (EE) I810(0): [dri] I810DRIScreenInit failed because of a version mismatch. > [dri] i810.o kernel module version is 1.1.0 but version 1.2 or greater is > needed. Here is a problem. You're using the X-server 4.2.1 from Sarge. 2.4.18-bf2.4 is the Woody installation kernel. Try installing a kernel from Sarge as well. > [dri] Disabling DRI. > (EE) I810(0): [drm] failed to remove DRM signal handler > (II) I810(0): [drm] removed 1 reserved context for kernel > DRIUnlock called when not locked > (II) I810(0): [drm] unmapping 8192 bytes of SAREA 0xc8911000 at 0x40014000 > (==) I810(0): Write-combining range (0xd0000000,0x4000000) > (II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (II) I810(0): Setting dot clock to 108.0 MHz [ 0x10 0x2 0x20 ] [ 18 4 2 ] > (II) I810(0): chose watermark 0x22210000: (tab.freq 108.0) > (WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed > (Cannot allocate memory) Is the agpgart kernel module loaded? > (II) I810(0): No physical memory available for 4194304 bytes of DCACHE > (II) I810(0): Adding 384 scanlines for pixmap caching > (II) I810(0): Allocated Scratch Memory > (II) I810(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Horizontal and Vertical Lines > Offscreen Pixmaps > Setting up tile and stipple cache: > 32 128x128 slots > 14 256x256 slots > (==) I810(0): Backing store disabled > (==) I810(0): Silken mouse enabled > (**) Option "dpms" > (**) I810(0): DPMS enabled > (==) I810(0): Direct rendering disabled > (WW) I810(0): Option "AGPMode" is not used > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > *cut out mouse and keyboard things* > > On Wednesday 04 December 2002 16.54, Stefan Lange wrote: > > Oskar Börjesson wrote: > > > Hi again. [... skipping again ...] Regards, Felix __\|/__ ___ ___ ___ __Tschüß_______\_6 6_/___/__ \___/__ \___/___\___You can do anything,___ _____Felix_______\Ä/\ \_____\ \_____\ \______U___just not everything____ fx...@gm... >o<__/ \___/ \___/ at the same time! |