Re: [Drbl-user] NIC Booting problem
Brought to you by:
steven_shiau
From: msacks <nt...@gm...> - 2011-02-02 17:07:44
|
On Sun, Jan 16, 2011 at 9:36 PM, Steven Shiau <st...@nc...> wrote: > > > On 01/12/2011 05:13 AM, msacks wrote: >> I performed this and it ran of inodes (see my previous thread today). >> I am going to try re-pushing with less provisioned clients, so the >> inodes don't run out and DRBLpush goes through smoothly. I tried >> booting the system after installing the nic drivers but it doesn't >> look like it worked. > Is your DRBL clients use the same kernel with that on your DRBL server? > If not, to force your clients to use the same kernel, you can run: > /opt/drbl/sbin/mknic-nbi -k `uname -r` > Then the kernel for your clients should be the same with that on the server. > The clients have the same kernel version because its running SSI mode (I believe). I re-pushed DRBL after compiling in the kernel drivers. I also added aliases to the tg3 and bnx2 drivers as was suggested by the build documents accompanying the drivers. So I ran drblpush -i and the system boots the version of Linux on the host which is great news. The only problem now is I passed the --keep_clients option Yes and I lost the custom configuration of my original configuration. The original configuration added a custom script to sshd startup on the drbl clients so it gets run every time a client boots. Thanks for the help. > Steven. >> On Mon, Jan 10, 2011 at 10:36 AM, msacks<nt...@gm...> wrote: >>> Because I have custom scripts that get run in a non-standard location, >>> I plan to use DRBL SSI mode. >>> I want to make sure that the only thing that changes is that the new >>> kernel module gets included, I'm not sure if clonezilla will work with >>> my custom NIC drivers, and I would need to create a new clonezilla >>> image if I am not mistaken. >>> >>> I am going to run the following steps, but wanted to run them by the >>> list to make sure I'm not making any mistake. >>> >>> 1) Take backup >>> 2) I am going to upgrade to DRBL unstable: drbl-1.9.8-18.i386.rpm by >>> running rpm -U drbl-1.9.8-18.i386.rpm >>> 3) Install HP NIC Driver >>> 4) I am going to run ./drblpush -i /etc/drbl/drblpush.conf using this >>> config file: http://pastie.org/1445886 >>> >>> Please confirm if these actions are correct to maintain my existing >>> configuration, while only updating the kernel modules (NIC drivers) >>> >>> >>> >>> On Tue, Jan 4, 2011 at 5:47 PM, Steven Shiau<st...@nc...> wrote: >>>> Hi, >>>> >>>> On 2010/12/30 上午 03:02, msacks wrote: >>>>> On Wed, Dec 29, 2010 at 3:13 AM, Steven Shiau<st...@nc...> wrote: >>>>>> You might have to compile the driver. >>>>>> Or you can try this method, it's easier: >>>>>> http://clonezilla.org/clonezilla-server-edition/use_clonezilla_live_in_drbl.php >>>>>> >>>>>> It's recommended to use the unstable DRBL, and uses Clonezilla live >>>>>> 20101223-maverick as the client's OS when running Clonezilla SE. >>>>> Thanks Steven. How can I check my existing boot method. I know right >>>>> now it's using the host OS using DRBL SSI (Single System Image) but >>>>> how might I check this? >>>> There is a config file in /etc/drbl/drblpush.conf, you can find the >>>> "clonezilla_mode" or "drbl_mode". >>>>> Will simply upgrading the DRBL version will fix this problem? >>>> Not really. The problem is on the kernel. Right now in your mode the >>>> clients are using the kernel from the server, so you might have to >>>> compile the kernel module on the server then run drblpush again. You can >>>> find some descriptions about this on the DRBL FAQ/Q&A webpage. >>>>> If I use CloneZilla live, I have some custom scripts that get executed >>>>> on the clients booting, do I have to do something to make sure they >>>>> get included if I switch to the CloneZilla OS? >>>> You still can do that, but it's a little different. You can refer to the >>>> notes on >>>> http://clonezilla.org/clonezilla-server-edition/use_clonezilla_live_in_drbl.php >>> This link appears to 404. >>> >>>> Steven. >>>>>> Steven. >>>>>> >>>>>> On 2010/12/29 上午 05:53, msacks wrote: >>>>>>> I am booting an HP system (Proliant BL460 - >>>>>>> http://h10010.www1.hp.com/wwpc/us/en/en/WF06a/3709945-3709945-3328410-241641-3328419-1842750.html >>>>>>> ) which has an HP NIC Driver: NC373i. >>>>>>> Is this something I should take up with HP or is there something else >>>>>>> I can do to work around the issue in DRBL? >>>>>>> >>>>>>> The error message is >>>>>>> >>>>>>> usb 6-1: Product: Virtual Keyboard >>>>>>> usb 6-1: Manufacturer: HP >>>>>>> The detected modules for hardware: lpfc cciss. Try to load them.... >>>>>>> XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX >>>>>>> The driver of the network card is NOT found! >>>>>>> Is this kernel 2.6.27.19-5-pae too old so it does not support this nic? >>>>>>> Without network card driver, we can NOT go on! >>>>>>> XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX >>>>>>> Now enter shell to debug >>>>>>> >>>>>>> Busybox v.1.13.4 (2009-04-22 09:56:32 CST) build-in shell (ash) >>>>>>> >>>>>>> .and it goes on into buysbox and fails there. >>>>>>> >>>>>>> ------------------------------------------------------------------------------ >>>>>>> Learn how Oracle Real Application Clusters (RAC) One Node allows customers >>>>>>> to consolidate database storage, standardize their database environment, and, >>>>>>> should the need arise, upgrade to a full multi-node Oracle RAC database >>>>>>> without downtime or disruption >>>>>>> http://p.sf.net/sfu/oracle-sfdevnl >>>>>>> _______________________________________________ >>>>>>> Drbl-user mailing list >>>>>>> Drb...@li... >>>>>>> https://lists.sourceforge.net/lists/listinfo/drbl-user >>>>>> -- >>>>>> Steven Shiau<steven _at_ nchc org tw> <steven _at_ stevenshiau org> >>>>>> National Center for High-performance Computing, Taiwan. >>>>>> http://www.nchc.org.tw >>>>>> Public Key Server PGP Key ID: 1024D/9762755A >>>>>> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >>>>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> Learn how Oracle Real Application Clusters (RAC) One Node allows customers >>>>>> to consolidate database storage, standardize their database environment, and, >>>>>> should the need arise, upgrade to a full multi-node Oracle RAC database >>>>>> without downtime or disruption >>>>>> http://p.sf.net/sfu/oracle-sfdevnl >>>>>> _______________________________________________ >>>>>> Drbl-user mailing list >>>>>> Drb...@li... >>>>>> https://lists.sourceforge.net/lists/listinfo/drbl-user >>>>>> >>>>> ------------------------------------------------------------------------------ >>>>> Learn how Oracle Real Application Clusters (RAC) One Node allows customers >>>>> to consolidate database storage, standardize their database environment, and, >>>>> should the need arise, upgrade to a full multi-node Oracle RAC database >>>>> without downtime or disruption >>>>> http://p.sf.net/sfu/oracle-sfdevnl >>>>> _______________________________________________ >>>>> Drbl-user mailing list >>>>> Drb...@li... >>>>> https://lists.sourceforge.net/lists/listinfo/drbl-user >>>> -- >>>> Steven Shiau<steven _at_ nchc org tw> <steven _at_ stevenshiau org> >>>> National Center for High-performance Computing, Taiwan. >>>> http://www.nchc.org.tw >>>> Public Key Server PGP Key ID: 1024D/9762755A >>>> Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A >>>> >>>> ------------------------------------------------------------------------------ >>>> Learn how Oracle Real Application Clusters (RAC) One Node allows customers >>>> to consolidate database storage, standardize their database environment, and, >>>> should the need arise, upgrade to a full multi-node Oracle RAC database >>>> without downtime or disruption >>>> http://p.sf.net/sfu/oracle-sfdevnl >>>> _______________________________________________ >>>> Drbl-user mailing list >>>> Drb...@li... >>>> https://lists.sourceforge.net/lists/listinfo/drbl-user >>>> >> ------------------------------------------------------------------------------ >> Protect Your Site and Customers from Malware Attacks >> Learn about various malware tactics and how to avoid them. Understand >> malware threats, the impact they can have on your business, and how you >> can protect your company and customers by using code signing. >> http://p.sf.net/sfu/oracle-sfdevnl >> _______________________________________________ >> Drbl-user mailing list >> Drb...@li... >> https://lists.sourceforge.net/lists/listinfo/drbl-user > > -- > Steven Shiau<steven _at_ nchc org tw> <steven _at_ stevenshiau org> > National Center for High-performance Computing, Taiwan. http://www.nchc.org.tw > Public Key Server PGP Key ID: 1024D/9762755A > Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A > > > ------------------------------------------------------------------------------ > Protect Your Site and Customers from Malware Attacks > Learn about various malware tactics and how to avoid them. Understand > malware threats, the impact they can have on your business, and how you > can protect your company and customers by using code signing. > http://p.sf.net/sfu/oracle-sfdevnl > _______________________________________________ > Drbl-user mailing list > Drb...@li... > https://lists.sourceforge.net/lists/listinfo/drbl-user > |