Activity for DragonOS_Pi64
-
DragonOS_Pi64 updated /README.txt
-
-
-
Srinivasan T created ticket #33
Dragon OS Focal - Decode RF
-
-
-
-
Cemaxecuter posted a comment on discussion General Discussion
Also partly why I’m building and selling these, https://cemaxecuter.com/?product=wardragon-w-case Which is x86 based, yet averages very low power consumption with the Intel n95/100 based processors. Sent from Proton Mail for iOS On Sun, May 19, 2024 at 1:26 PM, Hans Giger <hansgiger555@users.sourceforge.net> wrote: Nowadays, users of SDR technologies are interested in mobile computers with low power consumption and high efficiency, so x86-64 processors are losing popularity, everyone wants to have...
-
This is very true, however, to do wide bandwidth and heavy DSP on host needs compute. For example, even on the pi5 it simply can’t handle doing more theb maybe 6 or so Msps with heavy DSP. Sent from Proton Mail for iOS On Sun, May 19, 2024 at 1:26 PM, Hans Giger <hansgiger555@users.sourceforge.net> wrote: Nowadays, users of SDR technologies are interested in mobile computers with low power consumption and high efficiency, so x86-64 processors are losing popularity, everyone wants to have a mobile...
-
Hans Giger posted a comment on discussion General Discussion
Nowadays, users of SDR technologies are interested in mobile computers with low power consumption and high efficiency, so x86-64 processors are losing popularity, everyone wants to have a mobile SDR kit that works quickly and at the same time uses up the battery efficiently. An SDR kit that can be carried is more convenient than a stationary one; now it is better to assemble an effective system based on a single-board computer in a plastic case than to carry around a laptop with a bunch of wires...
-
yes sir, right now the combination of orange pi 5 and armbian is very popular, the operating system is very fast and light, I just installed it on orange pi 5 after many tips, and if now you create a new generation of dragonos on this basis, it will be fantastic, the range of users will be very expand, this will be a step towards a more modern and faster system
-
I should probably order one. I’m actually curious if I used armbian or the Ubuntu that’s not strictly Pi compatible, how many different SBCs it’d work with. Sent from Proton Mail for iOS On Sun, May 19, 2024 at 9:37 AM, Hans Giger <hansgiger555@users.sourceforge.net> wrote: thank you for your answer, you have a very interesting project and I’m interested in SDR, but the biggest problem is that besides gqrx I can’t install any software for SDR on orange pi 5, now many people choose orange pi 5 because...
-
thank you for your answer, you have a very interesting project and I’m interested in SDR, but the biggest problem is that besides gqrx I can’t install any software for SDR on orange pi 5, now many people choose orange pi 5 because of its power, efficiency, and amount of RAM and built-in M.2, this single-board computer is superior to most of its analogues, it is very popular now, but most SDR software is not adapted to it
-
Forgot to say, you mentioned Orange Pi5. My point is that I would have to start with an OS that boots on it. Neither the x86_64 or aarch64 build i use can do that.
-
Hello. So it’s not really so much about kernel as it is about the specific processor being used. DragonOS FocalX is for x86_64. DragonOS Pi64 is using 22.04 built for and around Pi. To the best of my knowledge a Pi OS only boots and runs on the Pi (Broadcom). A quick search again reminds me of this “Ubuntu 22.04 is available for Orange Pi 3B, and you can download the image from the Ubuntu-rockchip project on GitHub.The project aims to provide a default Ubuntu 22.04 experience for Rockchip RK3588...
-
Hello, support for orange pi 5 began with Linux kernel 6.7, and Linux kernel 6.9 has already been released, when will it be possible to run dragonos focal or dragonos pi64 on orange pi5, I've been waiting since last year, please help.
-
That’s one of those things that still bug me to this day. I can’t understand where I’m going wrong with my attempt at creating new certs on first boot and activating the service. It complains that I’m “restarting it too fast”. I must have tried like 10 different approaches. I’ll see if I can take another stab at it cause that’s probably annoying for the end user and it probably causes confusion as most people wouldn’t reboot and check again. Glad to see you have it up and working! Sent from Proton...
-
Chris Muzyn created ticket #32
OpenSSH Server Initially Needs a Device Power Cycle to Start
-
Hello, You’re only seeing that because the api is not installed by default for sdrplay. In the text file on the pi desktop you’ll find mention of how to get rid of seeing that by installing the api that’s up under /usr/src It won’t really harm anything except create the error. The other option, if you never intend to run sdrplay equipment, is to remove the sdrplay soapy module. I’ll have to get to a pi to get you the steps. I’ll check back in here asap. Sent from Proton Mail for iOS On Tue, Apr 23,...
-
limccart posted a comment on discussion General Discussion
Hello, I've had trouble in the past (on other Linux Distros) where if the correct version of LimeSuite isn't installed, the SDR won't pass the self tests. Every time it has been some sort of driver/package issue it seems. When I run SoapySDRUtil --find, I am able to find the Lime but I receive an error with sdrplay_api_Open(). I saw the note about the SDRPlay API under other, but I cannot find it. I have also already run "sudo apt update/upgrade" so most other dependencies should be up to date.
-
Tom S posted a comment on ticket #30
Did you ever get the caribou working with OpenWebRX? I went back to the thread on it on github and I think I have it set up properly but failing to start. I think I remember this being a sample rate issue before. Ive tried 1-4M and all crap out.
-
Awesome I'll have to install the repositories and update it. Did you ever figure out why it was loading the old site? On Fri, Apr 5, 2024, 9:17 PM Cemaxecuter cemaxecuter@users.sourceforge.net wrote: It did actually the same on Dragon, it’s just a noticed it was “recommending” some packages. Just got me poking a little. But so far it does seem to run fine. Sent from Proton Mail https://proton.me/mail/home for iOS On Fri, Apr 5, 2024 at 9:57 PM, Tom S <twitch@users.sourceforge.net <on%20fri,%20apr%205,%202024%20at%209:57%20pm,%20tom%20s%20%3c%3ca%20href=>>...
-
It did actually the same on Dragon, it’s just a noticed it was “recommending” some packages. Just got me poking a little. But so far it does seem to run fine. Sent from Proton Mail for iOS On Fri, Apr 5, 2024 at 9:57 PM, Tom S <twitch@users.sourceforge.net> wrote: I have not installed it on Dragon yet I added the repositories to my desktop and just did a sudo apt install openwebrx which took care of all the dependencies. Not sure if that is a possibility for you or not. Then it updates automatically....
-
I have not installed it on Dragon yet I added the repositories to my desktop and just did a sudo apt install openwebrx which took care of all the dependencies. Not sure if that is a possibility for you or not. Then it updates automatically. On Fri, Apr 5, 2024, 7:10 PM Cemaxecuter cemaxecuter@users.sourceforge.net wrote: That makes total sense. I ended up pulling it and upgrading it over the normal one. Question, I noticed it “recommends” some other packages that do not seem to exist. Dump 1090 mini...
-
That makes total sense. I ended up pulling it and upgrading it over the normal one. Question, I noticed it “recommends” some other packages that do not seem to exist. Dump 1090 mini and some other things. Extra SDR somrthing, which I don’t think that would be good if it did exist as it’d probably overwrite something. Other thing I notice is if you go to setting page the top options bar changes bsck to the old openwebrx. Besides that it seems super cool with tons of options! Oh it also overwrites...
-
I have not found any issues with the updated version and I know a crap load of the online SDR's are using it. It is still open source. I know back in the day people wanted to submit extensions and he just would not accept them telling them to fork their own so that's kinda where this one came from. It was silly that if you wanted this feature you had to run this fork. It was the same crap with dump1090 they didn't want to add features so we ended up with 30 forks. I run OpenWebRX+ open to the world...
-
Total right place. I'm not sure why I've been hesitant to switch to that version. I guess I was just paranoid about all the changes and it being we based. I go back to this statement on the one developers site, "Code quality and longevity over multitude of features The application code shall be written following common best practices and guides, with the goal that it may run for a long time, stable, and without the need for constant adaptation or maintenance." But I guess who am I to say that's not...
-
OpenWebRX+
-
Some details and steps exist here, https://sourceforge.net/p/dragonos-pi64/tickets/27/
-
Michael Wehrung created ticket #29
NVME Support on Dragon OS on a Raspi5
-
Idar Lund posted a comment on ticket #28
🥳
-
Feature Request: AIS-catcher
-
Feature Request: AIS-catcher
-
Forgot to mention, it's now included.
-
Tom modified a comment on discussion General Discussion
Hi, Finaly it works. I have redownloaded few times with matched checksum. Then reimage again and again and finally it started the UI even the error at the begining appear "zswap: zpool z3fold not available using default zbud". I also changed the micro hdmi adapter that could also causing the issues. Thank you!
-
Hi, Finaly it works. I have redownloaded few times with matched checksum. Then reimage again and again and finally it started the UI even the error at the begining appear "zswap: zpool z3fold not available using default zbud". Thank you!
-
I posted an updated guide on github. I'm not sure if it's one of you above, but on the github page I noticed someone added a line to the config.txt and I think that's the issue. Kernel-headers missing is fine. https://github.com/cariboulabs/cariboulite/issues/200
-
Just to clarify, are you sayin the boot is not finishing? The thing you’re seeing is normal since the one is not available and it moves to the other. That notice will be there on each boot and will proceed past. I thought for a second you werent seeing the login screen or something, disregard my monitor comment. Are you able to login and use the system? Sent from Proton Mail for iOS On Fri, Mar 15, 2024 at 5:46 AM, Tom <tomahawk@users.sourceforge.net> wrote: Hello, I tried both and the same issue...
-
Hello, I tried both and the same issue occured. Thank you for the feedback! ;-)
-
Would you be open to contacting me privately and me potentially remotely connecting? Sent from Proton Mail for iOS On Thu, Mar 14, 2024 at 11:53 AM, HansW <drhans@users.sourceforge.net> wrote: I still cannot get mine working at all with the native Dump1090 test app. I get a memory access violation error. Followed the steps in your video, but no luck. Does it look like I missed something? Flashed card with DragonOS Pi64 Beta 35.1 mkdir projects git clone https://github.com/unixpunk/cariboulite.git...
-
HansW posted a comment on discussion General Discussion
I'm trying to repair my kernel headers and keep getting this error: sudo apt install raspberrypi-kernel-headers [sudo] password for ubuntu: Reading package lists... Done Building dependency tree... Done Reading state information... Done E: Unable to locate package raspberrypi-kernel-headers
-
I still cannot get mine working at all with the native Dump1090 test app. I get a memory access violation error. Followed the steps in your video, but no luck. Does it look like I missed something? Flashed card with DragonOS Pi64 Beta 35.1 mkdir projects git clone https://github.com/unixpunk/cariboulite.git cd cariboulite git checkout patch-1 ./install.sh edit /boot/firmware/config.txt with the following: Comment out 'dtparam=i2c_arm=on' and ' dtparam=spi=on Added: 'dtparam=i2c_vc=on' and 'dtoverlay=spi1-3cs'...
-
As a quick test on the latest r35.1 where I fixed SDRAngel I started it like this sdrangel —soapy Added the hifi entry for caribou, changed to 1090 and dropped the adsb Demodulator. Raised gain real high and caught an aircraft or two. That’s promising. So now I’ll see what else will work for adsb. Sent from Proton Mail for iOS On Tue, Mar 12, 2024 at 1:10 PM, HansW <drhans@users.sourceforge.net> wrote: A gentle reminder to see if you were able to get the CaribouLite working with any version of Dump1090....
-
So I was able to just now build the caribou lite code from the main repo making sure to manually change a file as mentioned in the video when I used the fork repo. I also made sure, after initially making a mistake in the config.txt, that it matched as shown in the video. I then rebooted and applied the fix for the gpiomem issue. Built the dump1090 app and it runs, but I’ve not yet seen it find an aircraft yet. It is running though, that seems positive. Sent from Proton Mail for iOS On Tue, Mar 12,...
-
Mitchell Harding posted a comment on ticket #25
Just to close the loop on this, I manually updated raspi-config from https://archive.raspberrypi.org/debian/pool/main/r/raspi-config/raspi-config_20240228_all.deb Then I changed from wayland to X11 in the advanced settings. After that everything worked, both screen and VNC
-
That’s common, I’ll double check my end though. It should continue. Which hdmi port are you plugged into? Should be one closest to the power port. Sent from Proton Mail for iOS On Tue, Mar 12, 2024 at 3:22 PM, Tom <tomahawk@users.sourceforge.net> wrote: HEllo All, I am having issue booting DragonOS_Pi64_Beta35.img on RPI 4 and getting the following error at start: "zswap: zpool z3fold not available using default zbud" DragonOS_Pi64 booting zswap issue Sent from sourceforge.net because you indicated...
-
Hello All, I am having issue booting DragonOS_Pi64_Beta35.img on RPI 4 and getting the following error at start: "zswap: zpool z3fold not available using default zbud" Do you know what could be wrong ? Thank you! Tom
-
HEllo All, I am having issue booting DragonOS_Pi64_Beta35.img on RPI 4 and getting the following error at start: "zswap: zpool z3fold not available using default zbud"
-
A gentle reminder to see if you were able to get the CaribouLite working with any version of Dump1090. Thanks!!
-
-
-
-
So back to it not working again and I think I've figured out why. When I compile sdrangel on the Pi5 itself, all is well. I then take out the SD card an insert it into a Pi4, I get the illegal instruction. So there must be some flag or something getting turned on that the Pi5 has that the Pi4 doesn't.. at least that's my though. So the issue is back again in the R35 img. I'm now building SDRangel all over again, but on the Pi4 and I'll see if it runs in both the Pi4 and Pi5 soon as it's done. If...
-
Dang that was it? Good catch. I feel like I had that disabled due to something else but can’t recall. Sent from Proton Mail for iOS On Sun, Mar 3, 2024 at 6:03 PM, Mitchell Harding <mitchh22@users.sourceforge.net> wrote: Solved the issue by enabling Waylang in /etc/gdm3/custom.conf WaylandEnable=true [tickets:#25] Pi 5 with official touchscreen Status: open Milestone: 1.0 Created: Fri Jan 26, 2024 05:13 AM UTC by Mitchell Harding Last Updated: Sat Jan 27, 2024 11:22 PM UTC Owner: nobody The raspberry...
-
Solved the issue by enabling Waylang in /etc/gdm3/custom.conf WaylandEnable=true
-
-
-
-
I've got a pretty good working installation on my Pi. How to I create a compact image of the installation instead of just a backup image of the entire 64gb SD card?
-
I totally need to set aside some time and redo the pi image, update it for sure. This weekend perhaps at night some time. I recall there being a adsb application but I’ll see if it can work with like Readsb/tar1090. Sorry for the slow movement, some family in town the last week and for the next little while. Sent from Proton Mail for iOS On Tue, Feb 20, 2024 at 9:56 PM, HansW <drhans@users.sourceforge.net> wrote: Sorry, another CaribouLite question...Does anyone have experience getting Dump1090 to...
-
Benny, I got completely sidetracked. Does this help if you have not already figured it out? https://askubuntu.com/questions/1302099/how-to-have-the-second-taskbar-for-dual-monitor-setup-in-lxqt Sent from Proton Mail for iOS On Thu, Feb 15, 2024 at 10:43 AM, Benny <bennybb@users.sourceforge.net> wrote: Hi Cemaxecuter, Yes I tried LXQT but this did not work Raspberry pi,compatibility Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/dragonos-pi64/discussion/general/...
-
I can’t find the original post, but here’s the note I have. “ Load raspian on SD card, update pi5 firmware w/ instructions from Pimoroni's website for NVME board, reboot, attach board/NVME, boot w/ SD card again. Load DragonOS on NVME, then raspi-config to change boot to MVME, reboot, enjoy.” Sent from Proton Mail for iOS On Wed, Feb 21, 2024 at 5:27 AM, Cemaxecuter <cemaxecuter@users.sourceforge.net> wrote: I swear someone has that working. I’ll have to jump on my desktop and look around, but I...
-
I swear someone has that working. I’ll have to jump on my desktop and look around, but I think if you look through the tickets someone says all that’s needed is to first use the stock raspberry pi os to update the firmware. Then swap out to DragonOS. Sent from Proton Mail for iOS On Mon, Feb 12, 2024 at 9:12 AM, Benjamin Doucet <fishnwhiskey@users.sourceforge.net> wrote: [tickets:#27] Pi 5 m2 ssd thru pcie Status: open Milestone: 1.0 Created: Mon Feb 12, 2024 02:12 PM UTC by Benjamin Doucet Last...
-
Sorry, another CaribouLite question...Does anyone have experience getting Dump1090 to work with the CaribouLite? If so, could you post your config steps? Thanks!!
-
Feature Request: AIS-catcher
-
Were you able to get a working image cloned?
-
Benny posted a comment on discussion General Discussion
Hi Cemaxecuter, Yes I tried LXQT but this did not work
-
Oh yeah, I recall Lubuntu acting goofy like this. Can you try going to Preferences, LXQT settings, then monitor settings? There's a quick set or something like that option and I'm wondering if changes there will help. I'm doing some searches with this in google "lubuntu menu bar disappears on dual screen" to see if anything stands out.
-
Benjamin Doucet created ticket #27
Pi 5 m2 ssd thru pcie
-
Hi with my raspberry PI5 dual screen does not work, is it possible to solve? Starting with screen 1 works, but adding the second, the toolbar at the bottem dissapears.
-
Hi with my raspberry PI5 dual screen does not work, is it possible to solve?
-
That’s a good idea, would have to take a look and it’s likely going to require passing the correct soapy variables. I need to look at DSDFME too as it has some way it can do p25 i believe. Sent from Proton Mail for iOS On Tue, Jan 30, 2024 at 7:00 PM, HansW <drhans@users.sourceforge.net> wrote: Thanks so much for your updated video on getting the CaribouLite running. Helped so much!! Have you been able to get OP25 working with the CaribouLite SDR hat to do P25 trunk tracking? CaribouLite Rumor? Sent...
-
Thanks so much for your updated video on getting the CaribouLite running. Helped so much!! Have you been able to get OP25 working with the CaribouLite SDR hat to do P25 trunk tracking?
-
Here's what I put together last night, https://www.youtube.com/watch?v=oa9ZlwYyCxA
-
I do have it working now. I’m about to make a video and if it works at the end of the video I’m going to clone the image and share it specifically just for CaribouLite people so they have an out of the box working image. That’s my plan always. Sent from Proton Mail for iOS On Sun, Jan 28, 2024 at 8:11 PM, HansW <drhans@users.sourceforge.net> wrote: Did you ever get this working with Caribou Lite? CaribouLite Rumor? Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/dragonos-pi64/discussion/general/...
-
Did you ever get this working with Caribou Lite?
-
https://www.canakit.com/raspberry-pi-lcd-display-touchscreen.html?cid=usd&src=raspberrypi its $60 in stock here Although I'm not sure its unique to touchscreen since vnc doesnt work either with the pi 5
-
So it looks like they changed the GPIO access on the pi5's as it goes through the pcie now apparently. This is our problem.
-
Fresh install of Ubuntu 23.10 is not working I get the same gpiomem error. I have not tried the official raspberry pi os yet.
-
Can you shoot me a link to the touchscreen? If it’s not a lot I’d like to try and see if I can get ahold of one. Sent from Proton Mail for iOS On Fri, Jan 26, 2024 at 12:13 AM, Mitchell Harding <mitchh22@users.sourceforge.net> wrote: [tickets:#25] Pi 5 with official touchscreen Status: open Milestone: 1.0 Created: Fri Jan 26, 2024 05:13 AM UTC by Mitchell Harding Last Updated: Fri Jan 26, 2024 05:13 AM UTC Owner: nobody The raspberry pi 5 with the official touchscreen will show the ubuntu loading...
-
Tom, Have you tried on 23.10? If it’s working, I’d like to dig into what’s different about 23.10. Sent from Proton Mail for iOS On Sat, Jan 27, 2024 at 1:35 AM, Tom S <twitch@users.sourceforge.net> wrote: [tickets:#26] Cariboulite on Pi 5 Status: open Milestone: 1.0 Created: Sat Jan 27, 2024 06:35 AM UTC by Tom S Last Updated: Sat Jan 27, 2024 06:35 AM UTC Owner: nobody Any chance at getting the cariboulite working on a Raspberry Pi 5 I am getting gpio errors ubuntu@ubuntu:~$ CubicSDR Loading:: configuration...
-
Cariboulite on Pi 5
-
Pi 5 with official touchscreen
-
otpisani created ticket #24
session true ssh freeze
-
Oh yes, in the image you’d have to select custom and then the image. Maybe somehow it didn’t stick or got changed in settings before you hit burn? I was trying to think of how the apps disappeared, but makes sense now. Sent from Proton Mail for iOS On Wed, Jan 24, 2024 at 9:41 PM, Ira Fuchs <ihf@users.sourceforge.net> wrote: I think I somehow managed to image with Bullseye though still not sure how sicne I slected the DragonOS .img file packages not found Sent from sourceforge.net because you indicated...
-
Ira Fuchs modified a comment on discussion General Discussion
If only that were the problem. I'm afraid the packages are not there. I thought I imaged DragonOS_Pi64_Beta32.img. but must not have.
-
If only that were the problem. I'm afraid the packages are not there. I thought I imaged DragonOS_Pi64_Beta32.img. but must not have.I
-
I think I somehow managed to image with Bullseye. Redoing it.
-
I think I somehow managed to image with Bullseye though still not sure how sicne I slected the DragonOS .img file
-
If only that were the problem. I'm afraid the packages are not there. I imaged DragonOS_Pi64_Beta32.img. Is it possible that I selected the wrong type of OS in the Imager.app? Could that cause this?
-
Hello. You installed DragonOS Pi64 and logged in to a background that looks like a motherboard? The applications you are looking for are located under the menu button, bottom left, and then look at Other or Ham Radio. At the command line you can launch using gqrx or CubicSDR. You mention find, as in find at the command prompt? You could instead use which gqrx or which CubicSDR in a terminal if you want to see where they are installed.
-
I finally got DragonOS installed and working with my Cariboulite. However, I am not finding any of the SDR apps (e.g. CubicSDR, Gxrx, etc.). I even fid a find / and none were found. Where did I go wrong?
-
Brenden Ojibway posted a comment on ticket #23
hi turns out it was on my end i didnt see your headless setup instructions at all until late last night up and running now. but just laggy
-
Change to desktop with ssh, open the getting starter guide and go down to line 16 assuming you don’t have a monitor or hdmi dummy plug hooked up. Make the changes and reboot, use realvnc to connect briefly to the pi and log into the desktop. Right click network manager and see if you can see networks. I don’t know what you’ve tested previously, but I’m assuming you’ve tested this very same pi setup in the location it’s in before and saw WiFi? Just trying to narrow down what may be happening. What...
-
im trying to connect via ssh/ command line but that still doesnt explain why i cant even see the pi router
-
You shouldn’t need wpa supplicant file, you just use network manager bottom right area of desktop. I guess I didn’t ask/you didn’t mention how exactly you’re trying to connect. Are you doing it command line? Right click network connection manager bottom area of task bar and networks are listed. Put password in and connect. I just tried on the Pi and Wpa2 and had no issues connecting. Now perhaps if you’re trying to flash the Pi and preconfigure it to connect to your WiFi without using desktop manager,...
-
files dont have a wpa supplacant file that is needed for wifi to work please update your files so that the wpa supplacant exsists
-
my home network is both 2.4 and 5 ghz and im trying to get it to connect but it doesnt want to even show up on my network.
-
I’m not so much concerned with how you burnt the image, but my understanding is that you have your pi4 booted with DragonOS running on it and that you’re trying to use the internal WiFi on the Pi (no usb WiFi etc)? With the WiFi of the Pi you are unable to connect to your home network? Is your home network 2.4ghz, 5Ghz, encrypted? I’m just trying to see if I can replicate your issue. Sent from Proton Mail for iOS On Mon, Jan 15, 2024 at 12:19 PM, Brenden Ojibway <ojibs@users.sourceforge.net> wrote:...
1 >