[Dle-develop] [PATCH -tip v5 06/10] kprobes/x86: Cleanup save/restore registers

[Masami H. <mhi...@re...>]

Introduce SAVE/RESOTRE_REGS_STRING for cleanup kretprobe-trampoline asm
code. These macros will be used for emulating interruption.

Signed-off-by: Masami Hiramatsu <mhi...@re...>
Cc: Ananth N Mavinakayanahalli <an...@in...>
Cc: Ingo Molnar <mi...@el...>
Cc: Jim Keniston <jke...@us...>
Cc: Srikar Dronamraju <sr...@li...>
Cc: Christoph Hellwig <hc...@in...>
Cc: Steven Rostedt <ro...@go...>
Cc: Frederic Weisbecker <fwe...@gm...>
Cc: H. Peter Anvin <hp...@zy...>
Cc: Anders Kaseorg <an...@ks...>
Cc: Tim Abbott <ta...@ks...>
Cc: Andi Kleen <an...@fi...>
Cc: Jason Baron <jb...@re...>
Cc: Mathieu Desnoyers <mat...@po...>
---

 arch/x86/kernel/kprobes.c |  128 ++++++++++++++++++++++++---------------------
 1 files changed, 67 insertions(+), 61 deletions(-)

diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 85d88f6..73ac21e 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -551,6 +551,69 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 	return 0;
 }
 
+#ifdef CONFIG_X86_64
+#define SAVE_REGS_STRING		\
+	/* Skip cs, ip, orig_ax. */	\
+	"	subq $24, %rsp\n"	\
+	"	pushq %rdi\n"		\
+	"	pushq %rsi\n"		\
+	"	pushq %rdx\n"		\
+	"	pushq %rcx\n"		\
+	"	pushq %rax\n"		\
+	"	pushq %r8\n"		\
+	"	pushq %r9\n"		\
+	"	pushq %r10\n"		\
+	"	pushq %r11\n"		\
+	"	pushq %rbx\n"		\
+	"	pushq %rbp\n"		\
+	"	pushq %r12\n"		\
+	"	pushq %r13\n"		\
+	"	pushq %r14\n"		\
+	"	pushq %r15\n"
+#define RESTORE_REGS_STRING		\
+	"	popq %r15\n"		\
+	"	popq %r14\n"		\
+	"	popq %r13\n"		\
+	"	popq %r12\n"		\
+	"	popq %rbp\n"		\
+	"	popq %rbx\n"		\
+	"	popq %r11\n"		\
+	"	popq %r10\n"		\
+	"	popq %r9\n"		\
+	"	popq %r8\n"		\
+	"	popq %rax\n"		\
+	"	popq %rcx\n"		\
+	"	popq %rdx\n"		\
+	"	popq %rsi\n"		\
+	"	popq %rdi\n"		\
+	/* Skip orig_ax, ip, cs */	\
+	"	addq $24, %rsp\n"
+#else
+#define SAVE_REGS_STRING		\
+	/* Skip cs, ip, orig_ax and gs. */	\
+	"	subl $16, %esp\n"	\
+	"	pushl %fs\n"		\
+	"	pushl %ds\n"		\
+	"	pushl %es\n"		\
+	"	pushl %eax\n"		\
+	"	pushl %ebp\n"		\
+	"	pushl %edi\n"		\
+	"	pushl %esi\n"		\
+	"	pushl %edx\n"		\
+	"	pushl %ecx\n"		\
+	"	pushl %ebx\n"
+#define RESTORE_REGS_STRING		\
+	"	popl %ebx\n"		\
+	"	popl %ecx\n"		\
+	"	popl %edx\n"		\
+	"	popl %esi\n"		\
+	"	popl %edi\n"		\
+	"	popl %ebp\n"		\
+	"	popl %eax\n"		\
+	/* Skip ds, es, fs, gs, orig_ax, and ip. Note: don't pop cs here*/\
+	"	addl $24, %esp\n"
+#endif
+
 /*
  * When a retprobed function returns, this code saves registers and
  * calls trampoline_handler() runs, which calls the kretprobe's handler.
@@ -564,65 +627,16 @@ static void __used __kprobes kretprobe_trampoline_holder(void)
 			/* We don't bother saving the ss register */
 			"	pushq %rsp\n"
 			"	pushfq\n"
-			/*
-			 * Skip cs, ip, orig_ax.
-			 * trampoline_handler() will plug in these values
-			 */
-			"	subq $24, %rsp\n"
-			"	pushq %rdi\n"
-			"	pushq %rsi\n"
-			"	pushq %rdx\n"
-			"	pushq %rcx\n"
-			"	pushq %rax\n"
-			"	pushq %r8\n"
-			"	pushq %r9\n"
-			"	pushq %r10\n"
-			"	pushq %r11\n"
-			"	pushq %rbx\n"
-			"	pushq %rbp\n"
-			"	pushq %r12\n"
-			"	pushq %r13\n"
-			"	pushq %r14\n"
-			"	pushq %r15\n"
+			SAVE_REGS_STRING
 			"	movq %rsp, %rdi\n"
 			"	call trampoline_handler\n"
 			/* Replace saved sp with true return address. */
 			"	movq %rax, 152(%rsp)\n"
-			"	popq %r15\n"
-			"	popq %r14\n"
-			"	popq %r13\n"
-			"	popq %r12\n"
-			"	popq %rbp\n"
-			"	popq %rbx\n"
-			"	popq %r11\n"
-			"	popq %r10\n"
-			"	popq %r9\n"
-			"	popq %r8\n"
-			"	popq %rax\n"
-			"	popq %rcx\n"
-			"	popq %rdx\n"
-			"	popq %rsi\n"
-			"	popq %rdi\n"
-			/* Skip orig_ax, ip, cs */
-			"	addq $24, %rsp\n"
+			RESTORE_REGS_STRING
 			"	popfq\n"
 #else
 			"	pushf\n"
-			/*
-			 * Skip cs, ip, orig_ax and gs.
-			 * trampoline_handler() will plug in these values
-			 */
-			"	subl $16, %esp\n"
-			"	pushl %fs\n"
-			"	pushl %es\n"
-			"	pushl %ds\n"
-			"	pushl %eax\n"
-			"	pushl %ebp\n"
-			"	pushl %edi\n"
-			"	pushl %esi\n"
-			"	pushl %edx\n"
-			"	pushl %ecx\n"
-			"	pushl %ebx\n"
+			SAVE_REGS_STRING
 			"	movl %esp, %eax\n"
 			"	call trampoline_handler\n"
 			/* Move flags to cs */
@@ -630,15 +644,7 @@ static void __used __kprobes kretprobe_trampoline_holder(void)
 			"	movl %edx, 52(%esp)\n"
 			/* Replace saved flags with true return address. */
 			"	movl %eax, 56(%esp)\n"
-			"	popl %ebx\n"
-			"	popl %ecx\n"
-			"	popl %edx\n"
-			"	popl %esi\n"
-			"	popl %edi\n"
-			"	popl %ebp\n"
-			"	popl %eax\n"
-			/* Skip ds, es, fs, gs, orig_ax and ip */
-			"	addl $24, %esp\n"
+			RESTORE_REGS_STRING
 			"	popf\n"
 #endif
 			"	ret\n");


-- 
Masami Hiramatsu

Software Engineer
Hitachi Computer Products (America), Inc.
Software Solutions Division

e-mail: mhi...@re...