DisplayCAL 3.6.2 released

• [Feature] Measurement report: ICtCp and ΔICtCp color distance
  metric.
• [Enhancement] Show report type in self check report.
• [Enhancement] Add actual display profile description to self
  check report if a simulation profile is used as display
  profile.
• [Enhancement] Use the same method to create HDR 3D LUTs whether
  the display profile is cLUT or matrix based.
• [Enhancement] Verification: Do not automatically enable
  “Simulate whitepoint relative to display profile whitepoint” if
  the verification chart does not contain Lab* reference data.
• [Enhancement] Measurement and self check report: Only
  automatically enable the use of absolute values when simulating
  the reference whitepoint if no simulation profile was used.
• [Minor] 3D LUT/verification with a display profile that has a
  black level of zero, but embedded characterization data black
  level above zero: Black offset also needs to be applied if not
  using BT.1886 for correct results.
• [Minor] When generating high resolution PCS to device tables
  during HDR 3D LUT creation, use the configured resolution even
  if low quality PCS to device tables were generated when
  creating the profile.