[Devil-linux-commit] Fwd: build/config/etc/sysconfig/nic ifcfg-tun0.sample, NONE, 1.1 ifcfg-eth0.sample, 1.9, 1.10

[Serge L. <ser...@gm...>]

Update of /cvsroot/devil-linux/build/config/etc/sysconfig/nic
In directory sfp-cvsdas-3.v30.ch3.sourceforge.com:/tmp/cvs-serv22598/d/nic

Modified Files:
	ifcfg-eth0.sample
Added Files:
	ifcfg-tun0.sample
Log Message:

- added configuration for all types of routes (closed  bug #87)
- added configuration for ip rules
- added tunnel interface configuration example
- fixed improper bradcast address assignment



Index: ifcfg-eth0.sample
===================================================================
RCS file: /cvsroot/devil-linux/build/config/etc/sysconfig/nic/ifcfg-eth0.sample,v
retrieving revision 1.9
retrieving revision 1.10
diff -u -d -r1.9 -r1.10
--- ifcfg-eth0.sample	9 Jan 2010 16:19:26 -0000	1.9
+++ ifcfg-eth0.sample	30 Aug 2010 19:59:02 -0000	1.10
@@ -15,29 +15,60 @@
 MODULE=pcnet32
 #MODULE_OPTS=
 #
-### ROUTE="DESTINATION{:GATEWAY}"
-# where DESTINATION is NET/NETMASK or a HOST
-# the :GATEWAY is optional
+########################################################
+# ROUTE=" ...... "
+# where ROUTE is a keyword and the line with ROUTE
+# should not have spaces between the beginning of
+# the line and the keyword
+# Route statement is a any valid "ip route"# command,
+# without "ip route add" prefix - it will be added
+# automatically
 #
-## samples for all 4 possible scenarios
+# IPV6ROUTE="...."
+# IPV6ROUTE keyword can be used for ipv6 routes.
+#
+# RULE=" ...... "
+# where RULE is a keyword and the line with RULE
+# should not have spaces between the beginning of
+# the line and the keyword
+# Rule statement is a any valid "ip rule" command,
+# without "ip rule add" prefix - it will be added
+# automatically
+#
+# $DEVICE can be used to directly specify the interface
+#
+###### samples for several possible scenarios
 #
 # route to network 192.168.254.0/255.255.255.0 via gateway 10.90.1.252
-#ROUTE="$ROUTE 192.168.254.0/255.255.255.0:10.90.1.252"
+#ROUTE="192.168.254.0/255.255.255.0 via 10.90.1.252"
+# or
+#ROUTE="192.168.254.0/24 via 10.90.1.252"
+#
 #
 # route to host 192.168.3.1 via 10.90.1.252
-#ROUTE="$ROUTE 192.168.3.0:10.90.1.252"
+#ROUTE="192.168.3.0/32 via 10.90.1.252"
 #
 # route to network that is also reachable via this interface
-#ROUTE="$ROUTE 192.168.3.0/255.255.255.0"
+#ROUTE="192.168.3.0/24 dev $DEVICE"
 #
-# route to host that is also reachable via this interface
-#ROUTE="$ROUTE 192.168.5.7"
+# special routes
+#ROUTE="unreachable 10.0.0.0/8"
+#ROUTE="blackhole 192.168.1.0/24"
 #
-# add as many ROUTE="$ROUTE ...." lines as you need routes
+# add as many ROUTE="...." lines as you need routes
 #
+# the next line shows how to set the default gateway
+#ROUTE="default via 10.90.1.1".
 #
-# the next line shows how to set the default gateway (the default gw needs
-# "0" as a hostmask.
-#ROUTE="$ROUTE default/0{:GATEWAY}"
-# for example:
-#ROUTE="$ROUTE default/0:10.90.1.1"
+###### advanced routing
+# make sure additional routing table is created
+#
+# echo "200  bypass" >> /etc/iproute2/rt_tables
+#
+#ROUTE="default via 1.234.123.1 table bypass"
+#RULE="from 10.0.0.0/24 table bypass prio 500"
+#RULE="from 10.0.1.0/24 table bypass prio 600"
+#RULE="from 10.0.2.123/32 to 10.8.0.0/16 table main prio 400"
+#
+
+

--- NEW FILE: ifcfg-tun0.sample ---
#
# example for a tunnel INTERFACE
#
ONBOOT=yes
TUNNEL=yes

# bind the tunnel to the device DEVICE so that tunneled packets
# will only be routed via this device and will not be able to escape
# to  another device when the route to endpoint changes.
#DEVICE=eth4

# set the fixed local address for tunneled packets.
LOCAL=10.90.1.200

# set the remote endpoint of the tunnel.
REMOTE=10.90.2.200

# Available modes depend on the encapsulating address family.
# Modes for IPv4 encapsulation available: ipip, sit, isatap and gre.
# Modes for IPv6 encapsulation available: ip6ip6, ipip6 and any.
MODE=ipip

# addtional tunnel options if any
TUN_OPTS=""