Re: [Devil-linux-develop] devil linux 1.3.4 (CVS 2007-08-18) More build issues

[Serge L. <fi...@in...>]

Hello,

roy barnard wrote:
> 
> Firstly, I can not get DL first boot to copy the initial config file 'etc.tar.bz2' onto my
> configuration media compact flash /dev/hdc2.
> Copy just silently fails.....
> My workaround is to copy etc.tar.bz2 onto second partition using the 'install-on-usb' script.
I've tested it on CD - the file has been copied without problem. If I can find a
 usb-drive I'll check it once again.

> 
> Secondly, DL boot fails.
> This appears to be that 'mdev -s' fails to make /dev/loop0, so the cdrom image fails to mount.
> My workaround for this is to set INITRD_MODULES="loop" in /etc/sysconfig/config
> so 'load_modules' loads loop.ko and this populates /sys so 'mdev -s' makes the /dev/loop0
> Anybody point me in the right direction for the real fix for this?
It's my fault. I transfered loop module out of drivers/block/ dir...
It should be ok now. Please sync scripts/loop-AES from cvs and try again.

--
Serge Leschinsky