|
From: Heiko Z. <he...@zu...> - 2005-03-20 17:52:02
|
Kari, thanks for the bug report. It would be great if you could use the mailinglist in the future. cu Heiko Kari Mattsson wrote: > > Hello! > > We are (starting) to use DL for several different purposes due to its > "Ultra Rapid Deployment" nature combined with up-to-dateness, > excellent documentation, and over-all robustness. Thnaks for the work > so far! > > As we are humans, there are some errors. Here are the ones I've found > in all versions 1.2.1 - 1.2.3, and propably also 1.2.4 (I'm > downloading it now): > > > Named/bind: > > - file /etc/rndc.key is missing. It will cause an error to be > displayed in the log when it is started. I fixed this with just 'touch > /etc/rndc.key', as I'm not really using the rndc feature. > > - The /etc/sysconfig/jail/ISC_BIND file is missing a corresponding line > COPY /etc/rndc.key to copy that empty file to the jailroot. > > > Sagator: > > The otherwise good example file (taken directly form Sagator's home) > /etc/sagator.conf has a non-working LOGFILE setting. There is no > /var/log/sagator directory for the sagator.log file. I fixed this by > just removing 'sagator/' from the LOGFILE setting line. > > > Sagator-Postfix integration: > > You might want to add the following lines to the two main Postfix > configuration files either commented, or non-commented to make the > life easier for Sagator users: > > > # /etc/postfix/main.cf - Sagator requirement below: > #content_filter = smtp:localhost:27 > > # /etc/postfix/master.cf > # Sagator required addition below: > # Local smtpd without scanning > #localhost:26 inet n - n - 30 smtpd > # -o content_filter= > # -o myhostname=sagator.mydomain.sk > # -o local_recipient_maps= -o relay_recipient_maps= > # -o mynetworks=127.0.0.0/8 -o mynetworks_style=host > # -o smtpd_restriction_classes= -o smtpd_client_restrictions= > # -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= > # -o smtpd_recipient_restrictions=permit_mynetworks,reject > # -o > receive_override_options=no_unknown_recipient_checks,no_header_body_checks > > > > The last line above is a bit long... The above lines are from Sagator > readme documentation. > > > NTP > > You might want to add two to four times the line > > server pool.ntp.org > > to the file /etc/ntp.conf to have good global defaults for NTP servers. > I recently noticed Debian and Gentoo both default to that same address. > Adding the line more than once allows ntpd to use the best ntp server, > not just one. > > > SpamAssassin - SPAMD > > You also might want to enable Razor2 in SpamAssassin, as you have it > on DL. Just the line > > use_razor2 1 > > to the file /etc/mail/spamassassin/local.cf will do it. > > > Software RAID documentation > > I followed the documentation on v1.2, chapter 6 to create software > RAID-1. It worked okay, but after a reboot did not find the /dev/md0 > anymore. > > I found out the instructions are a bit mixed. You either have to use > the short (legacy) device names, or long (recommended) device names. > You cannot mix those. > > So, the /etc/mdadm.conf must be (for IDE-only system) either like > > DEVICE /dev/ide/host?/bus?/target?/lun0/part* > ARRAY /dev/md/0 level=raid1 num-devices=2 > UUID=d876333b:694e852b:e9a6f40f:0beb90f9 > devices=/dev/ide/host0/bus0/target0/lun0/part1,/dev/ide/host0/bus0/target1/lun0/part1 > > > > ....or like: > > > DEVICE /dev/hd* > ARRAY /dev/md0 level=raid1 num-devices=2 > UUID=d876333b:694e852b:e9a6f40f:0beb90f9 > devices=/dev/hda1,/dev/hdb1 > ´ > > ....and then software RAID will work ok. > > > > And a request in the end: > > Have you considered adding 'mailgraph' > <http://people.ee.ethz.ch/~dws/software/mailgraph/> to DL? If not, > could you? I know it is easy to add my own, but still.. > > > > I hope these issues are not too trivial, or something for you > correct/change. I also hope it is okay for me to email you some other > findings in the future, shall I find those. > > > > Terveisin/With kind regards/Med hälsningar/Lugupidamisega, > > Kari Mattsson > Trivore Corp. (Finland) > -- Regards Heiko Zuerker http://www.devil-linux.org |