[Devil-linux-commit] build/config/etc/initrd linuxrc, 1.94, 1.95 mount_cdrom, 1.40, 1.41

[Björn R. <br...@us...>]

Update of /cvsroot/devil-linux/build/config/etc/initrd
In directory sc8-pr-cvs12.sourceforge.net:/tmp/cvs-serv20943

Modified Files:
	linuxrc mount_cdrom 
Log Message:
build/config/etc/initrd/mount_cdrom


Index: linuxrc
===================================================================
RCS file: /cvsroot/devil-linux/build/config/etc/initrd/linuxrc,v
retrieving revision 1.94
retrieving revision 1.95
diff -u -d -r1.94 -r1.95
--- linuxrc	6 Jul 2007 04:04:39 -0000	1.94
+++ linuxrc	24 Jul 2007 08:04:46 -0000	1.95
@@ -179,6 +179,7 @@
 
 # give klogd some time to start
 sleep 1
+
 # mount proc
 mount -n -t proc proc /proc
 
@@ -257,7 +258,7 @@
 					if ask_yes_no ; then
 						/probe_all_scsi_modules
 					fi
-					if ! /mount_cdrom /cdrom noreboot ; then
+					if ! /mount_cdrom /cdrom -noreboot ; then
 						$RED
 						echo -e "Cannot find CD drive - try probing for SCSI controllers"
 						$NORMAL
@@ -321,6 +322,22 @@
         /mount_cdrom /cdrom
     fi
     tar -C /shm -xjf /cdrom/config/etc.tar.bz2
+    #
+    # we unmount here to be able to possibly activate run from ram
+    # if that's activated by the default config
+    # (bug reported by Dmitry Komarov)
+    sync
+    let i=0
+    while (! umount /cdrom 2>/dev/null) && [ $i -lt 10 ]; do
+        # at least in qemu there exists a race condition
+        # when unmounting the cdrom
+        let i=i+1
+        sleep 1
+    done
+    #
+    # FIXME - need to solve this in a nicer way as we search for
+    #         the cd/image twice which is quite ugly (fl)
+    #
 else 
     tar -C /shm -xjf /floppy/$DL_CONFIG_FILE
 fi
@@ -397,15 +414,19 @@
 mount -n --move /shm /cdrom/shm
 #umount /shm
 
+echo -n "Unmounting "
+
 # unmount proc because the final system will mount it again
+$GREEN; echo " proc"; $NORMAL
 umount /proc
 
 # start the system by swapping /dev/ram0 and /shm
-echo 'Starting up final system...'
+echo "Starting up final system..."
 cd /cdrom
 
 #change to new root and start up the real system
 pivot_root . initrd
+cd / # see "man 2 pivot_root"
 exec /usr/sbin/chroot . /sbin/pre_init $DL_CONFIG_SOURCE $DL_CONFIG_FILE $@ <shm/dev/console >shm/dev/console 2>&1
 
 # something went wrong

Index: mount_cdrom
===================================================================
RCS file: /cvsroot/devil-linux/build/config/etc/initrd/mount_cdrom,v
retrieving revision 1.40
retrieving revision 1.41
diff -u -d -r1.40 -r1.41
--- mount_cdrom	23 Jul 2007 13:48:54 -0000	1.40
+++ mount_cdrom	24 Jul 2007 08:04:47 -0000	1.41
@@ -7,14 +7,239 @@
 #
 # http://www.devil-linux.org
 #
+#------------------------------------
+# usage: mount_cdrom [-silent] [-noreboot] mountpoint
+#  -silent          reduce output to minimum
+#  -noreboot        return error instead of halting on error
+#
 
 # include our color definitions
 . colordefs
 
-if [ "$3" != "silent" ]; then
-	$GREEN
-	echo "Searching for Devil-Linux CD-ROM"
-	$NORMAL
+# parse command line options
+mountpoint="" # where the cdrom/iso gets mounted
+silent=""     # empty = notsilent
+noreboot=""   # empty = reboot on error
+while [ $# -gt 0 ]; do
+        case "$1" in
+                -silent )       silent=1;;
+                -noreboot )     noreboot=1;;
+                * )             [ -z "$mountpoint" ] && mountpoint="$1";;
+        esac
+        shift
+done
+
+DELAY=200000 # usec
+busy () {
+        # busy - print rotating busy indicator
+        #   inspired by http://www.shelldorado.com/newsletter/issues/2001-1-Jan.html
+        #   but this version works with plain sh
+        # (C) 2006 Friedrich Lobenstock <fl...@fl...>
+        #
+        # usage:
+        #       busy& busypid=$!
+        #       command_which_takes_a_long_time
+        #       kill $busypid >/dev/null 2>&1
+
+        # define the characters which make up the rotating busy sign
+        local Indicator_1="|"
+        local Indicator_2="/"
+        local Indicator_3="-"
+        local Indicator_4="\\"
+        local n=4 # n characters represent one rotation
+
+        local PRINTED=0 # did we print a character or not
+
+        trap cleanup 1 2 3 6 15
+
+        cleanup () {
+                [ $PRINTED = 1 ] && echo -ne "\\b \\b" # cleanup in case
+                exit 0
+        }
+
+        local i=1
+        while true; do
+                eval Indicator=\$Indicator_$i
+                echo -n "$Indicator" && PRINTED=1
+                let i++ && [ $i = $n ] && i=1
+                usleep ${DELAY}
+                echo -ne "\\b" && PRINTED=0
+        done
+}
+
+# helper function to start the busy indicator
+busy_start () {
+        busy& busypid=$!
+}
+
+# helper function to stop the busy indicator
+busy_stop () {
+        kill $busypid >/dev/null 2>&1; usleep ${DELAY}
+}
+
+run_from_ram () {
+        #
+        # usage: run_from_ram [--cdrom|--file]
+        #
+        # parameters:
+        #    --cdrom     try to load a cdrom to ram
+        #    --file      try to load an iso image file to ram
+        #
+        # returns:
+        #    0           systems is running from ram
+        #    1           either not configured to run from ram
+        #                or there was an error, but we can still
+        #                boot the standard way
+        #
+
+        local IS_CDROM=""; local IS_FILE=""; local MEDIATYPE=""
+        while [ $# -gt 0 ]; do
+                case "$1" in
+                        --cdrom )       IS_CDROM="yes"; MEDIATYPE="CDROM"
+                                        IS_FILE=""
+                                        ;;
+                        --file )        IS_FILE="yes"; MEDIATYPE="FILE"
+                                        IS_CDROM=""
+                                        ;;
+                esac
+                shift
+        done
+        # we need either --cdrom or --file to be set
+        if ! [ "${IS_CDROM}" -o "${IS_FILE}" ]; then
+                $RED
+                echo "ERROR: run_from_ram was called with neither the --cdrom nor the --file option"
+                echo
+                echo 'Please report to bu...@de...'
+                echo
+                $NORMAL
+                sleep 10
+                return 1
+        fi
+
+        # check if we already have a config loaded
+        if [ -e "/etc/Devil-release" -a "/etc/sysconfig/config" ]; then
+                # load main config file
+                . /etc/sysconfig/config
+        else
+                # nothing I can do about it, no config, no variable RUNFROMRAM
+                return 1
+        fi
+
+        # check if we should run from ram or not
+        [ -z "${RUNFROMRAM}" -o "${RUNFROMRAM}" != "yes" ] && return 1
+
+        ## FIXME
+        # we should probably define these somewhere more central
+        local RAMDISK=/shm/sys  # this has to be under /shm as this one is mount moved in linuxrc
+        local FILEMOUNT=/cd
+        local ISOFILE=bootcd.iso
+
+        # show that we are configured to run from ram
+        $YELLOW; echo 'System is configured to run from ram'; $NORMAL
+
+        local IMAGE_SIZE; local IMAGE_SIZE_MB; local RAMDISK_SIZE
+        # get size of image so we can estimate the needed ramdisk space
+        case ${MEDIATYPE} in
+                CDROM ) IMAGE_SIZE=$(df ${mountpoint} | grep "${mountpoint}" | awk '{print $(NF-4)}');;
+                FILE )  IMAGE_SIZE=$(du -k ${FILEMOUNT}/${ISOFILE} | awk '{print $1}');;
+        esac
+        let IMAGE_SIZE_MB=IMAGE_SIZE*10/1024+5 # do correct rounding
+        let IMAGE_SIZE_MB=IMAGE_SIZE_MB/10
+        # add some megs as a safety margin (also needed for safety check below)
+        let RAMDISK_SIZE=IMAGE_SIZE_MB+5
+
+        # create a ramdisk for the system ISO image
+        mkdir -p ${RAMDISK}
+        /sbin/mount -n -t tmpfs -o size=${RAMDISK_SIZE}m shmfs ${RAMDISK}
+
+        echo -n "Copying system image (${IMAGE_SIZE_MB} MB) to ramdisk..."
+        busy_start
+        case ${MEDIATYPE} in
+                CDROM ) # don't keep it mounted while copying
+                        /sbin/umount -n ${mountpoint}
+                        # it's a CDROM drive therefore we use a blocksize of 2k
+                        dd if=$disk of=${RAMDISK}/${ISOFILE} bs=2048 >/dev/null 2>&1
+                        ;;
+                FILE )  # it's a file so copy will do
+                        cp ${FILEMOUNT}/${ISOFILE} ${RAMDISK}/${ISOFILE} >/dev/null 2>&1
+                        ;;
+        esac
+        busy_stop
+        echo done.
+
+        # in case of an error we need to clean up
+        run_from_ram_cleanup () {
+                $YELLOW; echo "Falling back to standard mount..."; $NORMAL
+                sleep 10
+                /sbin/umount -n ${mountpoint} > /dev/null 2>&1
+                /sbin/umount -n ${RAMDISK} > /dev/null 2>&1
+                # revert back to standard mount if needed
+                [ ${IS_CDROM} ] && /sbin/mount -n -t iso9660 -o ro $disk ${mountpoint}
+        }
+
+        # check if ramdisk is full, then this is an indication that the image was to big during
+        # copying - this should never happen, but better save than sorry
+        if [ "$(df ${RAMDISK} | grep "${RAMDISK}" | awk '{print $(NF-2)}')" -eq 0 ]; then
+                $RED;
+                echo "ERROR: ramdisk size calculation error"
+                echo "       the image to copy was bigger than expected"
+                echo
+                echo 'Please report to bu...@de...'
+                echo
+                $NORMAL
+                run_from_ram_cleanup
+                return 1
+        fi
+
+        # get size of the copied image
+        local REAL_SIZE=$(du -k ${RAMDISK}/${ISOFILE} | awk '{print $1}')
+        let REAL_SIZE=REAL_SIZE*10/1024+5 # do correct rounding
+        let REAL_SIZE=REAL_SIZE/10
+
+        # check if we at least match the image size estimated before
+        if [ ${REAL_SIZE} -lt ${IMAGE_SIZE_MB} ]; then
+                $RED;
+                echo "FATAL-ERROR: copying failed - only ${REAL_SIZE} MB out of ${IMAGE_SIZE_MB} MB copied"
+                echo '             a possible source of this problem could be:'
+                echo '               * read errors - media defective?'
+                echo '               * out of RAM - need to install more RAM?'
+                echo
+                $NORMAL
+                run_from_ram_cleanup
+                return 1
+        fi
+
+        # recalculate the needed ramdisk size
+        RAMDISK_SIZE=$(df -k ${RAMDISK} | grep "${RAMDISK}" | awk '{print $(NF-3)}')
+
+        # mount ramdisk read-only and reduce to minimal size
+        /sbin/mount -n -o remount,ro,size=${RAMDISK_SIZE}k shmfs ${RAMDISK}
+
+        # loop mount final ISO image from ramdisk
+        /sbin/mount -n -t iso9660 -o loop,ro ${RAMDISK}/${ISOFILE} ${mountpoint}
+        if [ $? -ne 0 ]; then
+                $RED;
+                echo "FATAL-ERROR: mounting the copied image failed"
+                echo
+                echo 'Please report to bu...@de...'
+                echo
+                $NORMAL
+                run_from_ram_cleanup
+                return 1
+        fi
+
+        # no need to keep the original location mounted
+        [ ${IS_FILE} ] && /sbin/umount -n ${FILEMOUNT}
+
+        # finally done
+        $GREEN; echo 'System is now fully running from RAM'; $NORMAL
+        return 0
+}
+
+if [ !  $silent ]; then
+        $GREEN
+        echo "Searching for Devil-Linux CD-ROM"
+        $NORMAL
 fi
 
 # generate list of cdroms from devfs
@@ -31,8 +256,8 @@
     $NORMAL
     CDROMS=$DEVICE_USER
 fi
-				
-if [ "$3" != "silent" ]; then
+
+if [ !  $silent ]; then
 	$GREEN
 	echo "Search list: $CDROMS"
 	$NORMAL
@@ -41,20 +266,24 @@
 for disk in $CDROMS
 do
 	echo -n "checking $disk "
-	if /sbin/mount -n -t iso9660 -o ro $disk $1 2> /dev/null; then
-		if [ -e $1/DEVIL-LINUX ] ; then
-			if [ "$3" != "silent" ]; then
+	if /sbin/mount -n -t iso9660 -o ro $disk ${mountpoint} 2> /dev/null; then
+		if [ -e ${mountpoint}/DEVIL-LINUX ] ; then
+			if [ !  $silent ]; then
 				$YELLOW
 				echo -e "Found on $disk"
 				$NORMAL
 			fi
 			echo $disk > /shm/DL_DEVICE
+
+                        # run from ram if correct variable is set
+                        run_from_ram --cdrom
+
 			exit 0
 		else
 			$YELLOW
 			echo "wrong media"
 			$NORMAL
-			umount $1
+			/sbin/umount ${mountpoint}
 		fi
 	else
 		$RED
@@ -77,7 +306,7 @@
 				
 for disk in $DISCS
 do
-	echo -n "checking $disk "
+	echo -n "   checking $disk ... "
 	if /sbin/mount -n -t auto -o rw,noatime $disk /cd 2> /dev/null; then
 		if [ -e /cd/DEVIL-LINUX ] ; then
 			$GREEN
@@ -104,7 +333,7 @@
                                     echo "Upgrading System Boot Files"
                                     $NORMAL
 
-                                    /sbin/mount -o loop -t iso9660 /cd/bootcd.iso /cdrom
+                                    /sbin/mount -o loop=/dev/loop0 -t iso9660 /cd/bootcd.iso /cdrom
 
                                     cp -fp /cdrom/boot/* /cd/boot/ 2> /dev/null
                                     cp -fp /cdrom/DEVIL-LINUX /cd/
@@ -113,12 +342,12 @@
 				    chmod -R u+rw,g-rwx,o-rwx /cd/*
 
 				    sync
-				    umount /cdrom &> /dev/null
+				    /sbin/umount /cdrom &> /dev/null
                                     
                                     $GREEN
                                     echo "Mounting old version"
                                     $NORMAL
-				    /sbin/mount -o loop -t iso9660 /cd/bootcd.iso.old $1 || return 1
+				    /sbin/mount -o loop=/dev/loop0 -t iso9660 /cd/bootcd.iso.old ${mountpoint} || return 1
 				    echo $disk > /shm/DL_DEVICE
 				    dl_version=`cat /cd/DEVIL-LINUX 2> /dev/null`
                                     exit 0
@@ -130,19 +359,23 @@
 				$NORMAL
 			fi
 			if [ -e /cd/bootcd.iso ] ; then
-				# since this could be flash disk, lets make read-only.
-				# Should not write to this mount anymore anyway. It
-				# is attempted to umount it in pre_init but will fail
-				# because bootcd.iso is still mounted inside it.
-				# RO will make it less painfull.
-				/sbin/mount -o remount,ro,noatime $disk 2> /dev/null
-				/sbin/mount -o loop -t iso9660 /cd/bootcd.iso $1 || return 1
 				echo $disk > /shm/DL_DEVICE
-				dl_version=`cat /cd/DEVIL-LINUX 2> /dev/null`
-				if [ "$3" != "silent" ]; then
-					$YELLOW
-					echo -e "\nFound ISO ($dl_version) on $disk"
-					$NORMAL
+
+                                # run from ram if correct variable is set
+                                if ! run_from_ram --file; then
+					# since this could be flash disk, lets make read-only.
+					# Should not write to this mount anymore anyway. It
+					# is attempted to umount it in pre_init but will fail
+					# because bootcd.iso is still mounted inside it.
+					# RO will make it less painfull.
+					/sbin/mount -o remount,ro,noatime $disk 2> /dev/null
+					/sbin/mount -o loop=/dev/loop0 -t iso9660 /cd/bootcd.iso ${mountpoint} || return 1
+					dl_version=`cat /cd/DEVIL-LINUX 2> /dev/null`
+					if [ !  $silent ]; then
+						$YELLOW
+						echo -e "\nFound ISO ($dl_version) on $disk"
+						$NORMAL
+					fi
 				fi
 				exit 0
 			fi
@@ -150,7 +383,7 @@
 			$YELLOW
 			echo "wrong media"
 			$NORMAL
-			umount /cd
+			/sbin/umount /cd
 		fi
 	else
 		$RED
@@ -160,13 +393,13 @@
 done
 
 
-if [ "$3" != "silent" ]; then
+if [ !  $silent ]; then
 	$RED
 	echo "!!! Devil-Linux CD-ROM not found !!!"
 	$NORMAL
 fi
 
-[ "$2" = "noreboot" ] && exit 1
+[ $noreboot ] && exit 1
 
 $RED
 echo