Menu
▾
▴
devil-linux-develop
|
From: Heiko Z. <he...@zu...> - 2001-11-23 22:35:21
|
Hi, I will release 0.5Beta4 this weekend. Is somebody doing anything which should be included? cu Heiko |
|
From: Heiko Z. <he...@zu...> - 2001-12-14 23:45:17
|
Hi, yesterday I started to work again on DL, but the system is not booting. Did somebody change something important without testing? Mister D (whatever the real name is) reported the same problem. ... VFS: Mounted root (ext2 filesystem). FAT: bogus logical sector size 0 FAT: bogus logical sector size 0 Kernel panic: VFS: Unable to mount root fs on 01:01 Could be something with initrd, loop-device (build system). I'm not sure if I have time to fix it, before I go my bussiness trip (sunday). cu Heiko |
|
From: Friedrich L. <fl...@fl...> - 2001-12-15 00:03:53
|
On Fri, 14 Dec 2001 18:40, Heiko Zuerker wrote: > yesterday I started to work again on DL, but the system is not booting. > Did somebody change something important without testing? Did you check for changes in the CVS. > VFS: Mounted root (ext2 filesystem). > FAT: bogus logical sector size 0 > FAT: bogus logical sector size 0 > Kernel panic: VFS: Unable to mount root fs on 01:01 Hmmm that's /dev/ram1. # l /dev/ram1 brw-rw---- 1 root disk 1, 1 Jul 29 2000 /dev/ram1 > Could be something with initrd, loop-device (build system). I would have liked to change something there if I had the time to. Could it be those changes made by you? http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/devil-linux/build/scripts/build-iso.diff?r1=text&tr1=1.10&r2=text&tr2=1.12&diff_format=h init=linuxrc was removed! =================================================================== RCS file: /cvsroot/devil-linux/build/scripts/build-iso,v retrieving revision 1.10 retrieving revision 1.12 diff -u -r1.10 -r1.12 --- devil-linux/build/scripts/build-iso 2001/10/29 13:03:09 1.10 +++ devil-linux/build/scripts/build-iso 2001/11/25 22:08:58 1.12 @@ -1,7 +1,7 @@ #! /bin/bash # $Source: /cvsroot/devil-linux/build/scripts/build-iso,v $ -# $Revision: 1.10 $ -# $Date: 2001/10/29 13:03:09 $ +# $Revision: 1.12 $ +# $Date: 2001/11/25 22:08:58 $ # # http://www.devil-linux.org # @@ -173,8 +173,9 @@ echo "Ram disk size will be $ISIZE KB" + #init=/sbin/init cat > $CDDIR/isolinux.cfg <<-EOF - DEFAULT /boot/vmlinuz root=/dev/ram1 initrd=/boot/initrd.gz init=linuxrc ramdisk=$ISIZE + DEFAULT /boot/vmlinuz root=/dev/ram1 initrd=/boot/initrd.gz ramdisk=$ISIZE prompt 0 EOF -- MfG / Regards Friedrich Lobenstock |
|
From: Heiko Z. <he...@zu...> - 2001-12-15 00:20:20
|
On Sat, 15 Dec 2001 01:03:47 +0100 (CET) "Friedrich Lobenstock" <fl...@fl...> wrote: > On Fri, 14 Dec 2001 18:40, Heiko Zuerker wrote: > > > yesterday I started to work again on DL, but the system is not booting. > > Did somebody change something important without testing? > > Did you check for changes in the CVS. Yes, everything seems to be ok. > > Could be something with initrd, loop-device (build system). > > I would have liked to change something there if I had the time > to. > > Could it be those changes made by you? Thought it firs to and tried it. This only effects which program is loaded as init process after the initrd. Shit I have to go soon..... I think it is inside initrd. The kernel says that he found a valid boot image at block 0 (initrd) and shortly after this he crashes. At the moment I think he is not starting the script. cu Heiko |
|
From: Friedrich L. <fl...@fl...> - 2001-12-15 00:30:00
|
On Fri, 14 Dec 2001 19:18, Heiko Zuerker wrote: > I think it is inside initrd. The kernel says that he found a valid > boot image at block 0 (initrd) and shortly after this he crashes. > At the moment I think he is not starting the script. Did you move linuxrc to /bin/init or is /bin/init a link to /linuxrc? What bothers me is the message VFS: Mounted root (ext2 filesystem). FAT: bogus logical sector size 0 FAT: bogus logical sector size 0 Why on earth is the kernel telling that root is ext2 and then complains about FAT? Something not compiled into the kernel that should? -- MfG / Regards Friedrich Lobenstock |
|
From: Heiko Z. <he...@zu...> - 2001-12-15 00:30:16
|
Can somebody try to build a system after a make mrproper? Just to make sure, that the problem is not on my system. I do a make mrproper, too. cu Heiko |
|
From: Friedrich L. <fl...@fl...> - 2001-12-15 00:38:25
|
On Fri, 14 Dec 2001 19:25, Heiko Zuerker wrote: > Can somebody try to build a system after a make mrproper? > Just to make sure, that the problem is not on my system. > I do a make mrproper, too. OK, I'll do. But first a "cvs checkout". friedl:lfssystem # cvs_sf checkout build ? build/src ? build/logfile ? build/tmp ? build/.config ? build/logfile-iso ? build/logfile2 ? build/dist ? build/scripts/dialog/config.log ? build/scripts/dialog/config.h ? build/scripts/dialog/config.cache ? build/scripts/dialog/config.status ? build/scripts/dialog/makefile ? build/scripts/dialog/dialog ? build/scripts/dialog/samples/install/makefile cvs server: Updating build U build/CHANGES cvs server: Updating build/config cvs server: Updating build/config/etc cvs server: Updating build/config/etc/diald cvs server: Updating build/config/etc/init.d cvs server: Updating build/config/etc/initrd cvs server: Updating build/config/etc/isdn cvs server: Updating build/config/etc/ppp cvs server: Updating build/config/etc/ppp/peers cvs server: Updating build/config/etc/ppp/sample cvs server: Updating build/config/etc/rc1.d cvs server: Updating build/config/etc/rc3.d cvs server: Updating build/config/etc/rcS.d cvs server: Updating build/config/etc/ssh cvs server: Updating build/config/etc/sysconfig cvs server: Updating build/config/etc/sysconfig/nic cvs server: Updating build/config/etc/syslog-ng cvs server: Updating build/docs U build/docs/ADMIN.lyx U build/docs/DEVELOPER.lyx cvs server: Updating build/scripts U build/scripts/build.sh U build/scripts/cfg_runlevel U build/scripts/copy_base U build/scripts/x509patch cvs server: Updating build/scripts/build cvs server: Updating build/scripts/config cvs server: Updating build/scripts/dialog cvs server: Updating build/scripts/dialog/debian cvs server: Updating build/scripts/dialog/intl cvs server: Updating build/scripts/dialog/po cvs server: Updating build/scripts/dialog/samples cvs server: Updating build/scripts/dialog/samples/copifuncs cvs server: Updating build/scripts/dialog/samples/install cvs server: Updating build/scripts/install cvs server: Updating build/scripts/iso cvs server: Updating build/scripts/scripts cvs server: Updating build/src friedl:lfssystem # Now in the LFS-System: root:/build# make mrproper unpack build install iso &> logfile& But that will take it's time. I'll burn a CD-RW tomorrow when it's finished and try to boot it. -- MfG / Regards Friedrich Lobenstock |
|
From: Friedrich L. <fl...@fl...> - 2001-12-15 00:46:22
|
On Sat, 15 Dec 2001 01:38, Friedrich Lobenstock wrote: > OK, I'll do. I have to admit that I have some older sources, those to be exact: freeswan-1.92.tar.gz linux-2.4.16pre1.tar.bz2 openssh-3.0.1p1.tar.gz wget-1.7.1.tar.gz x509patch-0.9.3-freeswan-1.92.tar.gz We'll see the outcome. -- MfG / Regards Friedrich Lobenstock |
|
From: Friedrich L. <fl...@fl...> - 2001-12-15 01:21:37
|
On Sat, 15 Dec 2001 01:46, Friedrich Lobenstock wrote: > On Sat, 15 Dec 2001 01:38, Friedrich Lobenstock wrote: > > > OK, I'll do. > > I have to admit that I have some older sources, those to be exact: > freeswan-1.92.tar.gz > linux-2.4.16pre1.tar.bz2 > openssh-3.0.1p1.tar.gz > wget-1.7.1.tar.gz > x509patch-0.9.3-freeswan-1.92.tar.gz > > We'll see the outcome. To bad but it looks as if I've to get the latest sources first :( make[2]: Leaving directory /build/tmp/linux/arch/i386/lib' make[1]: Leaving directory /build/tmp/linux' executing x509patch with option build (in /build/tmp/x509patch-0.9.3-freeswan-1.92) /build/scripts/build.sh: /build/tmp/x509patch-0.9.3-freeswan-1.92/freeswan.diff: No such file or directory make: *** [build] Error 1 -- MfG / Regards Friedrich Lobenstock ____________________________________________________________________ Friedrich Lobenstock FL226-RIPE Internetservices URL: http://www.fl.priv.at/ Email: fl...@fl... ____________________________________________________________________ |
|
From: Mister D <mi...@sh...> - 2001-12-15 02:03:47
|
I'm going to try again with my sources from Heiko (still can't get CVS to work), and see if a mrproper helps or not. I did notice that the kernel .config file (2.4.16-pre1) does not have CONFIG_BLK_DEV_LOOP set, so I've set it to 'y' to see if that helps as well. BTW, for the record, the real name is Dean :) Dean Mills mi...@sh... -----Original Message----- From: dev...@li... [mailto:dev...@li...]On Behalf Of Friedrich Lobenstock Sent: Friday, December 14, 2001 17:22 To: Devil-Linux-Developer Mailing Liste Subject: Re: [Devil-linux-develop] boot problem with current version On Sat, 15 Dec 2001 01:46, Friedrich Lobenstock wrote: > On Sat, 15 Dec 2001 01:38, Friedrich Lobenstock wrote: > > > OK, I'll do. > > I have to admit that I have some older sources, those to be exact: > freeswan-1.92.tar.gz > linux-2.4.16pre1.tar.bz2 > openssh-3.0.1p1.tar.gz > wget-1.7.1.tar.gz > x509patch-0.9.3-freeswan-1.92.tar.gz > > We'll see the outcome. To bad but it looks as if I've to get the latest sources first :( make[2]: Leaving directory /build/tmp/linux/arch/i386/lib' make[1]: Leaving directory /build/tmp/linux' executing x509patch with option build (in /build/tmp/x509patch-0.9.3-freeswan-1.92) /build/scripts/build.sh: /build/tmp/x509patch-0.9.3-freeswan-1.92/freeswan.diff: No such file or directory make: *** [build] Error 1 -- MfG / Regards Friedrich Lobenstock ____________________________________________________________________ Friedrich Lobenstock FL226-RIPE Internetservices URL: http://www.fl.priv.at/ Email: fl...@fl... ____________________________________________________________________ _______________________________________________ Devil-linux-develop mailing list Dev...@li... https://lists.sourceforge.net/lists/listinfo/devil-linux-develop |
|
From: Friedrich L. <fl...@fl...> - 2001-12-15 02:11:27
|
On Fri, 14 Dec 2001 18:02, Mister D wrote: > I'm going to try again with my sources from Heiko (still can't get CVS to > work), and see if a mrproper helps or not. I did notice that the kernel > .config file (2.4.16-pre1) does not have CONFIG_BLK_DEV_LOOP set, so I've > set it to 'y' to see if that helps as well. I've just updated my sources from ftp.de.devil-linux.org, except the kernel 2.4.16 (no pre!), which I got from a local mirror instead. We'll see if the compilation finishes without an error this time. > BTW, for the record, the real name is Dean :) THEN Mr. Dean Mills, configure your mail client to reflect this fact! -- MfG / Regards Friedrich Lobenstock ____________________________________________________________________ Friedrich Lobenstock FL226-RIPE Internetservices URL: http://www.fl.priv.at/ Email: fl...@fl... ____________________________________________________________________ |
|
From: Heiko Z. <he...@zu...> - 2001-12-15 15:55:17
|
On Fri, 14 Dec 2001 18:02:29 -0800 "Mister D" <mi...@sh...> wrote: > .config file (2.4.16-pre1) does not have CONFIG_BLK_DEV_LOOP set, so We shouldn't need a loop device. I'll try with 2.4.17-rc1 and if this not works, I'll enable the loop, too. > name is Dean :) Hi Dean! It's better to communicate with real names. cu Heiko |
|
From: Heiko Z. <he...@zu...> - 2001-12-15 17:20:15
|
The problem is within the CVS files, this means in the scripts. I checkout out the version from 11/25/2001 and it worked. I'll try to figure out where the problem is. cu Heiko |
|
From: Heiko Z. <he...@zu...> - 2001-12-15 20:59:58
|
Hi, the problem is within the script build.sh or the new kernel compilation method. Let's see if I find it. cu Heiko |
|
From: Heiko Z. <he...@zu...> - 2001-12-15 21:35:14
|
I think I found the problem. It is within "functions". The changes I made to the get_libs function did not work. Sorry for that. Currently I compile the system, I keep you guys up-to-date about the status. cu Heiko |
|
From: Heiko Z. <he...@zu...> - 2001-12-15 22:15:14
|
The problem is fixed ! It was the file functions. cu Heiko |
|
From: <no...@fr...> - 2003-08-25 11:18:15
|
|
From: <no...@fr...> - 2003-08-25 11:54:34
|
|
From: <no...@fr...> - 2003-08-25 12:44:34
|
|
From: ferris b. <fer...@ho...> - 2003-10-15 12:24:52
|
Thanks, my problem is resolved. It is now working again with v1.0 (When I it use the right way) >From: Heiko Zuerker <hz@pr...> Re: Build problem 2003-10-14 10:27 I >would suggest that you use the 1.0 version, since the 1.1 build system is >undergoing major changes right now and is right now hard to support/debug >in such an early stage. >Specify "-r rel-1-0-patches" when you do a checkout from the CVS. > >Using 1.1 only makes sense when you do active development. >I'll also document a bug, so I add this to the documentation, > >cya > Heiko _________________________________________________________________ MSN Messenger 6 http://g.msn.fr/FR1001/866 : dialoguez en son et en image avec vos amis. |
|
From: <as...@ac...> - 2004-08-18 11:10:21
Attachments:
build-iso
|
Hi, Please see the attached logfile generated by the "make iso". The "make iso" completes with no errors. However there is no "bootcd.iso" as expected in the "tmp" directory. When the "make dist" is invoked it exists wi the complain of iso file not present. Please advice. with Regards, ASHWIN |
|
From: Heiko Z. <he...@zu...> - 2004-08-19 19:46:23
|
Hey, sorry for the late answer, but I'm currently traveling (sitting at the airport right now). > Please see the attached logfile generated by the "make iso". > > The "make iso" completes with no errors. However there is no "bootcd.iso" > as expected in the "tmp" directory. When the "make dist" is invoked it > exists wi the complain of iso file not present. Looking at the log I think you didn't execute a few steps: 1) make mrproper unpack prepare (looks like you did this one) 2) make build install iso (I guess you didn't run 'install') Alone the fact that mkisofs is not available let's me get to this conclusion. -- Regards Heiko Zuerker http://www.devil-linux.org |
|
From: Ashwin M. <as...@ac...> - 2004-08-19 19:58:00
|
Hello,
> Looking at the log I think you didn't execute a few steps:
> 1) make mrproper unpack prepare
> (looks like you did this one)
Yes, I did all that.
> 2) make build install iso
> (I guess you didn't run 'install')
Well i did do the follwing in order.
make build
make install
make iso
And then never found the "bootcd.iso". Right now I am running the build
afresh once again.
Will let you know the results tomorrow sometime.
>
> Alone the fact that mkisofs is not available let's me get to this
conclusion.
Where do I look for the same (to check its presence / absence) ?
with Regards,
ASHWIN
|
|
From: <as...@ac...> - 2004-08-23 06:04:06
Attachments:
21Aug2004.tar.bz
|
Hi, Please find attached the logfiles. The "make iso" does not produce the iso image as expected. What could be the problem ? with Regards, ASHWIN |
|
From: Heiko Z. <he...@zu...> - 2004-08-24 00:25:23
|
as...@ac... wrote: >Hi, > >Please find attached the logfiles. > >The "make iso" does not produce the iso image as expected. > >What could be the problem ? > > I'm missing the logfiles from the "make build" part, can you provide those please? Which distribution are you using on your compile host? Heiko |
