devil-linux-develop Mailing List for Devil-Linux (Page 109)

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

missed to set LVM="2" in case of lvm2



Looks like make install of bind 9.2.3 has problems, if the libraries are
not installed in the libdir directory in the make install phase... there
are some of the libtool calls relay on the libdir directory...  

soo... i have added a make install to the base system and now it looks
working...  and some checking for useradd... 

now the librareis libdns are in the cdimage... 


Hello all,

	I'm missing the variable HZ patch in current devil 2.4 kernel.
The attached set of patches adds these two options:

CONFIG_HZ - HZ value for 2.4 kernels
CONFIG_PSCHED_CLOCK_SOURCE - clock source for packet schedulers

The later option will allow to configure more better accuracy for the
packet schedulers (like HTB etc.) for 686 based machines (and maybe for
other machines using PSCHED_GETTIMEOFDAY option, but it might get some CPU
power, because gettimeofday() function is slow). This option is valid for
2.6 kernels, too.

Step-by-step applying of this change:

1) get vhz+jiffies64 patch from rml

ftp://ftp.kernel.org/pub/linux/kernel/people/rml/variable-HZ/v2.4/vhz-j64-2.4.23.patch

2) add this patch to kernel-patches-2.4.tar.bz2:

root:/build/src# tar tjf kernel-patches-2.4.tar.bz2
kernel-patches-2.4/
kernel-patches-2.4/cflags_extra.diff
kernel-patches-2.4/imq-2.4.22-through-to-2.4.25-pre6.diff
kernel-patches-2.4/linux-2.4.25-i2c-2.8.4.patch
kernel-patches-2.4/netfilter-imq-patch-2.4.21.diff
kernel-patches-2.4/vhz-j64-2.4.23.patch

3) copy grsecurity-kernel-vhz?.patch attachments to /build/src directory
4) apply the devil-vhz.patch in /build directory with -p0

Comments are welcome.

My next goals are:

- integrate frox FTP proxy (it's only working FTP proxy which can
  redirect FTP transfers to squid as far as I know, thus you don't
  need to have two URL pools in your system)
  http://frox.sourceforge.net/
- integrate SIP server
  http://www.iptel.org/ser/

						Jaroslav

P.S. Thank you for the devil distribution.

-----
Jaroslav Kysela <pe...@pe...>
Hey folks,

I plan to release 1.0.5 this weekend, do you have any more fixes which 
should be included ?

So far the following changes have been made:
- updated linux-wlan-ng to v0.2.1-pre20
- added Super-FreeS/WAN v1.99.8
- removed the standard FreeS/WAN + Patches
- added Kernel patch to fix new mremap vulnerability
- added Kernel patch for "Rusty's broken brain" error/failure.
- IPv6 is now compiled as modules
- update_src now checks the md5 checksums of the files
- updated zebra to 0.94 (fl / compile testing by Thomas Eder)
- menuconfig now correctly sets any missing list values in the config file
- fixed named start problem when jail disabled (fl)

cu
   Heiko




> P.S. I still don't believe you with Python ;-)
> (I hope I have time soon to try it out)

here is the  Python logfile :-))))

a fresh build is happen here with the latest build :-)
and a lfssystem.. now.. 





On 03/11/2004 04:58:00 AM Oliver Jehle wrote:
>First time i have compiled all packages with the settings below
>...  and the cdrom boots..
>
>i know, there are some packages (most of them kernel specific)
>not working yet... but the userspace is now compiling and looks
>working...
>
>showstoppers like python also compile !!!!!!

COOOOOOOOL :-))

Heiko

P.S. I still don't believe you with Python ;-)
(I hope I have time soon to try it out)





On 03/11/2004 04:45:10 AM Oliver Jehle wrote:
>some scripts are not executable in init.d ??? but this will fix it when
>creating the ETC directory..
>
>perhaps setting the flags correct in cvs will be a better solution :-)
>but in meantime...
>
>
> - create_etc.diff

The cfg_runlevel script already takes care of that.
You usually run into this problem when you do some testing, since
cfg_runlevel get's executet only once.
After a "make clean install" everything is fine again.

Heiko





> Feature Requests item #914031, was opened at 2004-03-11 10:16
> Message generated for change (Tracker Item Submitted) made by Item
> Submitter
> You can respond by visiting:
> https://sourceforge.net/tracker/?func=detail&atid=410646&aid=914031&group_id=34096
>
> Category: None
> Group: None
> Status: Open
> Priority: 5
> Submitted By: Oliver jehle (ojehle)
> Assigned to: Nobody/Anonymous (nobody)
> Summary: Setup System Enhancement
>
> Initial Comment:
> if you have to supply devil-linux for more then one
> configuration,  there should be a possibility to do
> this, instead of copy the files for the specific target
> to the right places,  before burning the cd's
>
> as i can imagine... only a dream :-)
>
> you have 3 servers with 3 different setup's.
>
> make build
> make install
> make config server-1
> make config server-2
> make config server-2
> make iso [server-[1,2,3]]
>
> in the config stage, a setup will be launched, reading the
> old configuration from a save location and merge it the
> the new config files in the build system.  after
> configuring them,
> the config will be written back to the save location
> and the iso build
> will optionally done with the configuration merged...

That won't work very good. Some programs/libs just depend on each other
and when you mess with the config, you'll run into problems.

Take a look at the directory scripts/configuration/profiles
you can i.e. compile this way:
make PROFILE=router mrproper unpack prepare build install iso

-- 

Regards
  Heiko Zuerker
  http://www.devil-linux.org



Feature Requests item #914031, was opened at 2004-03-11 10:16
Message generated for change (Tracker Item Submitted) made by Item Submitter
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=410646&aid=914031&group_id=34096

Category: None
Group: None
Status: Open
Priority: 5
Submitted By: Oliver jehle (ojehle)
Assigned to: Nobody/Anonymous (nobody)
Summary: Setup System Enhancement

Initial Comment:
if you have to supply devil-linux for more then one
configuration,  there should be a possibility to do
this, instead of copy the files for the specific target
to the right places,  before burning the cd&#039;s 

as i can imagine... only a dream :-) 

you have 3 servers with 3 different setup&#039;s.

make build
make install
make config server-1 
make config server-2
make config server-2 
make iso [server-[1,2,3]]

in the config stage, a setup will be launched, reading the
old configuration from a save location and merge it the
the new config files in the build system.  after
configuring them,
the config will be written back to the save location
and the iso build
will optionally done with the configuration merged...

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=410646&aid=914031&group_id=34096



First time i have compiled all packages with the settings below
...  and the cdrom boots..

i know, there are some packages (most of them kernel specific)
not working yet... but the userspace is now compiling and looks 
working... 

showstoppers like python also compile !!!!!! 

----------------------------------------------------------------------
CONFIG_ALSA=y
CONFIG_ALSA_PLAYER=y
CONFIG_BINUTILS=y
CONFIG_BOOT_OPTION_VGA=80x25
CONFIG_CPU=586
CONFIG_CRON=y
CONFIG_CVS=y
CONFIG_DISTCCD=y
CONFIG_FILE=y
CONFIG_GCC3=y
CONFIG_GCC_ET_DYN=y
CONFIG_GCC_PIE=y
CONFIG_GCC_STACK_PROTECTOR=y
CONFIG_HOTPLUG=y
CONFIG_INITRD_FS=EXT2
CONFIG_IPSEC_TOOLS=y
CONFIG_ISC_BIND=y
CONFIG_JOE=y
CONFIG_KERNEL_CPU=586
CONFIG_LHA=y
CONFIG_LIBSAFE=y
CONFIG_LIBSTDC_COMPAT=y
CONFIG_LINUX_NR_CPUS=4
CONFIG_LINUX_VERSION=2.6
CONFIG_LM_SENSORS=y
CONFIG_LOGROTATE=y
CONFIG_LVM=n
CONFIG_LVM2=y
CONFIG_MC=y
CONFIG_MEMTEST86=y
CONFIG_MTOOLS=y
CONFIG_MYSQL_CLIENT=y
CONFIG_MYSQL_SERVER=y
CONFIG_NO_LOCALE=y
CONFIG_OPENLDAPLIB=y
CONFIG_OPENSSL_BIN=y
CONFIG_PASSWDGEN=y
CONFIG_PAX=y
CONFIG_PCIUTILS=y
CONFIG_PERL=y
CONFIG_POSTGRESQL_CLIENT=y
CONFIG_PWLIB=y
CONFIG_PYTHON=y
CONFIG_RCS=y
CONFIG_RPM=y
CONFIG_RRDTOOL=y
CONFIG_SCREEN=y
CONFIG_SG3_UTILS=y
CONFIG_SYSSTAT=y
CONFIG_UNARJ=y
CONFIG_UNRAR=y
CONFIG_UNZIP=y
CONFIG_VIM=y
CONFIG_WATCHDOG=y
CONFIG_ZIP=y
CONFIG_DOSFSTOOLS=y
CONFIG_JFS=y
CONFIG_MDADM=y
CONFIG_QUOTA_TOOLS=y
CONFIG_RAIDTOOLS=y
CONFIG_XFS=y
CONFIG_PYTHON_LDAP=y
CONFIG_IANS=y
CONFIG_LINUX_WLAN_NG=y
CONFIG_PCMCIA_CS=y
CONFIG_PRISM54=y
CONFIG_SMARTMONTOOLS=y
CONFIG_HEARTBEAT=y
CONFIG_OPENH323=y
CONFIG_MAIL_SPAMASSASSIN=y
CONFIG_CLAMAV=y
CONFIG_CYRUS_SASL=y
CONFIG_DOVECOT=y
CONFIG_FETCHMAIL=y
CONFIG_NAIL=y
CONFIG_POSTFIX=y
CONFIG_POSTFIX_TLS=y
CONFIG_RAZOR_AGENTS=y
CONFIG_SAGATOR=y
CONFIG_ARPWATCH=y
CONFIG_ISC_DHCP=y
CONFIG_FWLOGWATCH=y
CONFIG_HEIMDAL=y
CONFIG_HTTPD=y
CONFIG_JFTPGW=y
CONFIG_MGETTY=y
CONFIG_NET_SNMP=y
CONFIG_NTP=y
CONFIG_OIDENTD=y
CONFIG_OPENH323GK=y
CONFIG_OPENLDAP_FULL=y
CONFIG_OPENSSH=y
CONFIG_PHP=y
CONFIG_SARG=y
CONFIG_SNORT=y
CONFIG_SQUID=y
CONFIG_SQUIDGUARD=y
CONFIG_TCP_WRAPPERS=y
CONFIG_THTTPD=y
CONFIG_VSFTPD=y
CONFIG_XINETD=y
CONFIG_ZEBRA=y
CONFIG_PORTMAP=y
CONFIG_NIS=y
CONFIG_BRIDGE_UTILS=y
CONFIG_EBTABLES=y
CONFIG_SHOREWALL=y
CONFIG_DAEMONTOOLS=y
CONFIG_ETHTOOL=y
CONFIG_IPAC_NG=y
CONFIG_IPROUTE2=y
CONFIG_MTR=y
CONFIG_NETACCT=y
CONFIG_NTOP=y
CONFIG_RSYNC=y
CONFIG_STUNNEL=y
CONFIG_TCPDUMP=y
CONFIG_VLAN=y
CONFIG_WEBALIZER=y
CONFIG_WIRELESS_TOOLS=y
CONFIG_DDUP=y
CONFIG_EZ_IPUPDATE=y
CONFIG_NO_IP_UPDATER=y
CONFIG_OPENVPN=y
CONFIG_VTUN=y
CONFIG_LFTP=y
CONFIG_LYNX=y
CONFIG_MINICOM=y
CONFIG_NCFTP=y
CONFIG_TELNET_BSD=y
CONFIG_WGET=y
CONFIG_PPP=y
CONFIG_QADSL=y
CONFIG_RPPPPOE=y
CONFIG_RRLOGIND=y
CONFIG_WVDIAL=y
CONFIG_MOTION=y
CONFIG_GPM=y
CONFIG_PMAKE=8
CONFIG_USE_DISTCC=y





some scripts are not executable in init.d ??? but this will fix it when
creating the ETC directory.. 

perhaps setting the flags correct in cvs will be a better solution :-) 
but in meantime... 



activate sysfs if /sys directory exists... 



Small modifications in the LVM2 build script and 
in the init.d/mountfs for support also lvm2

can you check mountfs on a lvm1 based installation ??? 
i can't test it, but i think, modifications are ok :-) 
lvm2 works.. for me.. with 2.6 now.. 

 
thanks 

oliver


Oliver Jehle wrote:
> 2.6 needs /sys for serveral things... migraded from /proc to /sys... 
> so... make the directories also
> 

DONE

But I changed it so it's only created when kernel 2.6 is used.

Heiko



Oliver Jehle wrote:
> ported patch for gcc smash protector to 2.6.3 .. old patch didn't patch
> the Makefile in lib proper.. so... here it is..
> 
> can you upload it to the source ftp 

DONE

Heiko



Oliver Jehle wrote:
> ipsec-tools only work in 2.6 not 2.4....
> and small error in configuration...
> 
> there exists a newer version including also the natt support and some
> security fixes from kame
> 
> http://sourceforge.net/projects/ipsec-tools/
> 
> please upload it to the ftp area !!!

DONE

Heiko



Roland Pabel wrote:
> On Wednesday 10 March 2004 15:37, Oliver Jehle wrote:
> 
>>i don't found any note, that it works with 2.6....
> 
> wouldn't it be better to disable this in configuration/nbd (like camsource) ? 
> Could confuse people if it is selected but never built...
> Roland 

Agreed.
I added it to nbd.config

Heiko



On Wednesday 10 March 2004 15:37, Oliver Jehle wrote:
> i don't found any note, that it works with 2.6....
wouldn't it be better to disable this in configuration/nbd (like camsource) ? 
Could confuse people if it is selected but never built...
Roland 
-- 
ICQ UIN 49339118	Linux Counter #88774
GPG-Key 1024D/59C6AFA6 2003-02-07 Roland Pabel <ro...@pa...>



2.6 needs /sys for serveral things... migraded from /proc to /sys... 
so... make the directories also


i don't found any note, that it works with 2.6....


Index: nbd
===================================================================
RCS file: /cvsroot/devil-linux/build/scripts/nbd,v
retrieving revision 1.1
diff -u -r1.1 nbd

--- nbd 1 Mar 2004 00:30:25 -0000       1.1
+++ nbd 10 Mar 2004 14:25:16 -0000
@@ -23,6 +23,7 @@
 # source functions and config
 source $MYDIR/settings

+test ! "$CONFIG_LINUX_VERSION" = "2.4" && exit 0
 MYNAME=ENBD

 case $1 in


ipsec-tools only work in 2.6 not 2.4....
and small error in configuration...

there exists a newer version including also the natt support and some
security fixes from kame

http://sourceforge.net/projects/ipsec-tools/

please upload it to the ftp area !!!



Index: ipsec-tools
===================================================================
RCS file: /cvsroot/devil-linux/build/scripts/ipsec-tools,v
retrieving revision 1.2
diff -u -r1.2 ipsec-tools
--- ipsec-tools 16 Jan 2004 19:16:56 -0000      1.2
+++ ipsec-tools 10 Mar 2004 07:04:39 -0000
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/bash -x
  # $Source: /cvsroot/devil-linux/build/scripts/ipsec-tools,v $
  # $Revision: 1.2 $
  # $Date: 2004/01/16 19:16:56 $
@@ -24,19 +24,14 @@
  source $MYDIR/settings

  # not supported without backport of ipsec from kernel 2.6
-test ! "$CONFIG_LINUX_VERSION" = "2.4" && exit 0
+test ! "$CONFIG_LINUX_VERSION" = "2.6" && exit 0

-test ! "$CONFIG_IPSEC_TOOL" = "y" && exit 0
+test ! "$CONFIG_IPSEC_TOOLS" = "y" && exit 0


  case $1 in
      build )
         ./bootstrap
-       cd src/racoon
-       aclocal
-       automake
-       autoconf
-       cd ../..
         ./configure --prefix=/usr --sysconfdir=/etc/ipsec-tools --with-kernel-headers=$KERNELDIR/include
         make  || exit 1
         make install || exit 1
Index: configuration/ipsec-tools.config
===================================================================
RCS file: /cvsroot/devil-linux/build/scripts/configuration/ipsec-tools.config,v
retrieving revision 1.2
diff -u -r1.2 ipsec-tools.config
--- configuration/ipsec-tools.config    27 Jan 2004 00:44:52 -0000      1.2
+++ configuration/ipsec-tools.config    10 Mar 2004 07:04:39 -0000
@@ -5,4 +5,4 @@
  #
  # http://www.devil-linux.org

-test "$CONFIG_LINUX_VERSION" = "2.4" && menu_add "Networking|VPN" bool "IPSEC Tools Racoon" CONFIG_IPSEC_TOOLS
+test "$CONFIG_LINUX_VERSION" = "2.6" && menu_add "Networking|VPN" bool "IPSEC Tools Racoon" CONFIG_IPSEC_TOOLS

ported patch for gcc smash protector to 2.6.3 .. old patch didn't patch
the Makefile in lib proper.. so... here it is..

can you upload it to the source ftp 

thanks

oliver


Bruce Smith wrote:
> make[2]: Entering directory `/data/build/tmp/cyrus-imapd-2.2.3/perl'
> ### Making install in /data/build/tmp/cyrus-imapd-2.2.3/perl/imap
> make[3]: Entering directory `/data/build/tmp/cyrus-imapd-2.2.3/perl/imap'
> Makefile out-of-date with respect to /usr/lib/perl5/5.8.2/i686-linux/Config.pm /usr/lib/perl5/5.8.2/i686-linux/CORE/config.h
> Cleaning current config before rebuilding Makefile...
> make -f Makefile.old clean > /dev/null 2>&1 || /bin/sh -c true
> /usr/bin/perl Makefile.PL "PREFIX=/usr"
> Checking if your kit is complete...
> Looks good
> Writing Makefile for Cyrus::IMAP
> ==> Your Makefile has been rebuilt. <==
> ==> Please rerun the make command.  <==
> false
> make[3]: *** [Makefile] Error 1
> make[3]: Leaving directory `/data/build/tmp/cyrus-imapd-2.2.3/perl/imap'
> make[2]: *** [install] Error 1
> make[2]: Leaving directory `/data/build/tmp/cyrus-imapd-2.2.3/perl'
> make[1]: *** [install] Error 1
> make[1]: Leaving directory `/data/build/tmp/cyrus-imapd-2.2.3'

It's fixed in CVS.

Heiko



> > /usr/bin/perl Makefile.PL "PREFIX=/usr"
> > Checking if your kit is complete...
> > Looks good
> > Writing Makefile for Cyrus::IMAP
> > ==> Your Makefile has been rebuilt. <==
> > ==> Please rerun the make command.  <==
> > false
> > make[3]: *** [Makefile] Error 1
> > make[3]: Leaving directory `/data/build/tmp/cyrus-imapd-2.2.3/perl/imap'
> > make[2]: *** [install] Error 1
> > make[2]: Leaving directory `/data/build/tmp/cyrus-imapd-2.2.3/perl'
> > make[1]: *** [install] Error 1
> > make[1]: Leaving directory `/data/build/tmp/cyrus-imapd-2.2.3'
> > 
> 
> I just saw it, too.

That's good, usually it's just me!  :-)
And I thought it was because I forgot to start with a fresh LFS...

> I can't fix it today, so it would be great if you could fix what I 
> screwed up. Otherwise just un-select it.

I already unselected it and restarted a compile mrproper/new-LFS.

If I have time, I'll take a look for the problem when it's done. 
(if the compile gets done before my LUG meeting tonight :)

> Sorry for that

No problem, I don't use cyrus-imapd.

 - BS






2001	Jan	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep (55)	Oct (44)	Nov (156)	Dec (123)
2002	Jan (130)	Feb (156)	Mar (162)	Apr (171)	May (97)	Jun (127)	Jul (58)	Aug (81)	Sep (86)	Oct (45)	Nov (41)	Dec (84)
2003	Jan (71)	Feb (87)	Mar (133)	Apr (152)	May (151)	Jun (232)	Jul (320)	Aug (237)	Sep (271)	Oct (536)	Nov (301)	Dec (393)
2004	Jan (393)	Feb (184)	Mar (314)	Apr (225)	May (139)	Jun (77)	Jul (87)	Aug (75)	Sep (139)	Oct (50)	Nov (8)	Dec (28)
2005	Jan (66)	Feb (63)	Mar (14)	Apr (14)	May (8)	Jun (23)	Jul (21)	Aug (6)	Sep (29)	Oct (55)	Nov (38)	Dec (8)
2006	Jan (5)	Feb (10)	Mar (1)	Apr (15)	May (32)	Jun (44)	Jul (11)	Aug (8)	Sep (9)	Oct (14)	Nov (4)	Dec (3)
2007	Jan (3)	Feb (3)	Mar (2)	Apr	May	Jun	Jul (35)	Aug (49)	Sep (8)	Oct (42)	Nov (44)	Dec (7)
2008	Jan (2)	Feb (7)	Mar (8)	Apr (80)	May (74)	Jun (29)	Jul (5)	Aug (7)	Sep (6)	Oct (1)	Nov	Dec
2009	Jan (8)	Feb (19)	Mar (3)	Apr (24)	May (22)	Jun (23)	Jul (8)	Aug (23)	Sep (8)	Oct (27)	Nov (52)	Dec (27)
2010	Jan (36)	Feb (29)	Mar (17)	Apr (28)	May (21)	Jun (4)	Jul	Aug (28)	Sep (18)	Oct (6)	Nov (34)	Dec (16)
2011	Jan (18)	Feb (12)	Mar	Apr	May (9)	Jun (1)	Jul (5)	Aug (5)	Sep (7)	Oct (16)	Nov (26)	Dec (17)
2012	Jan (6)	Feb (34)	Mar (52)	Apr (10)	May (3)	Jun	Jul	Aug (1)	Sep	Oct (4)	Nov (1)	Dec (4)
2013	Jan (5)	Feb	Mar	Apr (5)	May (4)	Jun	Jul	Aug (14)	Sep	Oct	Nov	Dec
2014	Jan	Feb (2)	Mar (5)	Apr	May	Jun	Jul	Aug	Sep	Oct	Nov (3)	Dec (11)
2015	Jan (5)	Feb	Mar	Apr	May	Jun	Jul	Aug (1)	Sep (1)	Oct (1)	Nov	Dec
2016	Jan	Feb	Mar	Apr	May	Jun (2)	Jul	Aug	Sep	Oct	Nov	Dec
2017	Jan (1)	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct	Nov	Dec
2018	Jan (2)	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct	Nov	Dec

devil-linux-develop Mailing List for Devil-Linux (Page 109)

devil-linux-develop — developer discussions