Re: [Dev-C++] FREE download: a HOW-TO use wxWindows with Dev-C++

[Brian A. <bri...@gm...>]

Well, here's the part that works...
================================
bja3622@ANN /c/wx/samples/minimal
$ make -f makefile.unx     c++ -c `wx-config --cxxflags` -o minimal.o 
minimal.cpp
c++ -o minimal minimal.o `wx-config --libs`
================================
and my flags look like this ::

bja3622@ANN /c/wx/samples/minimal
$ wx-config --cxxflags
-I/usr/local/lib/wx/include/mswd-2.5 -D__WXDEBUG__ -D__WXMSW__ -mthreads 
-fno-pcc-struct-return

bja3622@ANN /c/wx/samples/minimal
$ wx-config --libs
-L/usr/local/lib  -Wl,--subsystem,windows -mwindows -mthreads   
/usr/local/lib/libwxmsw250d.a -ltiff -lrpcrt4 -loleaut32 -lole32 -luuid 
-lwinspool -lwinmm -lshell32 -lcomctl32 -lctl3d32 -ladvapi32 -lwsock32
================================
And this is the make output from Dev-Cpp
$ make -f makefile.win
g++.exe -c minimal.cpp -o minimal.o -I"C:/Dev-Cpp/include/c++"  
-I"C:/Dev-Cpp/include/c++/mingw32"  -I"C:/Dev-Cpp/include/c++/backward"  
-I"C:/Dev-Cpp/include"  -I"C:/msys/1.0/local/include"  
-I"C:/msys/1.0/local/lib/wx/include/mswd-2.5" -D__WXDEBUG__  
-D__WXMSW__  -D__GNUWIN32__  -mthreads  -fno-pcc-struct-return 
windres.exe -i Project2_private.rc -I rc -o Project2_private.res -O 
coff  --include-dir C:/msys/1.0/local/include
g++.exe minimal.o Project2_private.res -o "Project2.exe" 
-L"C:/Dev-Cpp/lib" -L"C:/msys/1.0/local/lib/wx" -mwindows 
-Wl,--subsystem,windows  -mwindows  -mthreads    
C:/wx/mswd/lib/libwxmsw250d.a  -ltiff  -lrpcrt4  -loleaut32  -lole32  
-luuid  -lwinspool  -lwinmm  -lshell32  -lcomctl32  -lctl3d32  
-ladvapi32  -lwsock32
================================
Aside from the inclusion of -D__GNUWIN32__ the compiler options are the 
same (plus a bunch of include directories, maybe relevant, maybe not...I 
don't know how to tell)

Same story with the libs too...the only difference is the -L"..." flags....

I guess the culprit must be right here....

Brian Ackermann




Yeoh HS wrote:

>----- Original Message -----
>From: "Brian Ackermann" <bri...@gm...>
>To: <dev...@li...>
>Sent: Friday, June 20, 2003 10:14 PM
>Subject: Re: [Dev-C++] FREE download: a HOW-TO use wxWindows with Dev-C++
>
>
>  
>
>>Yeoh, and others
>>
>>I've done according to the instructions in this document, and,
>>unfortunately I get the same problem I had gotten before.  The
>>application compiles (but Dev-Cpp cannot run it, I must go through the
>>explorer for that...) but when it executes, immediately it generates an
>>error
>>
>>The exception unknown software exception (0xc00000fd) occurred in the
>>application at location 0x0040d40d.
>>
>>However, the application will compile if I do a  "make -f makefile.unx"
>>the application compiles AND RUNS just fine....
>>
>>Where am I going wrong?
>>
>>Brian Ackermann
>>
>>
>>    
>>
>Hi Brian,
>
>I see from your compile log that you've built the debug version of version
>2.5.0. When you created your Dev-C++ project, where did you get the compiler
>defines and linker flags? Is it from the wx-config file?
>
>When you do "make -f makefile.unx", the wx-config file is used in the build
>process.
>Since this works, you might want to take a look at wx-config file to see the
>compiler defines and linker flags and compare them with your Dev-C++ project
>settings.
>
>Best Regards,
>Yeoh
>--
>P.S. I'm off on a trip, so will be away from the pc for a week or so. :-)
>
>
>
>
>-------------------------------------------------------
>This SF.Net email is sponsored by: INetU
>Attention Web Developers & Consultants: Become An INetU Hosting Partner.
>Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission!
>INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php
>_______________________________________________
>Dev-cpp-users mailing list
>Dev...@li...
>TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
>https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>
>
>  
>