Read and respond to this message at:
https://sourceforge.net/forum/message.php?msg_id=7035299
By: fafaforza
I searched the error around but did not find any real solutions.
I'm trying to use ddclient manually, ie: providing it the IP it should set with
DynDNS. I tried it with this command (with or without -use=ip, no difference):
# ddclient -use=ip -ip 1.2.3.223 -file /etc/ddclient/ddclient.conf -daemon
0 -verbose
In return, I get:
# ddclient[7249]: SUCCESS: somehost.mine.nu: skipped: IP address was already
set to 1.2.3.222.
I thought the whole point was to update something that might very possibly be
already set to something else. Deleting /var/cache/ddclient/ddclient.cache
is the only way to get it to update the IP. I also waited 10 or so minutes
beteen updates. Am I missing something?
Below is my config:
daemon=300
syslog=yes
mail=root
mail-failure=root
pid=/var/run/ddclient.pid
ssl=no
protocol=dyndns2
server=members.dyndns.org
login=uname
password=passwd
custom=yes, \
server=members.dyndns.org, \
protocol=dyndns2 \
somehost.mine.nu
______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit:
https://sourceforge.net/forum/unmonitor.php?forum_id=399428
|
