From: T. S. T. <Scott@ScottTesterman.com> - 2007-02-14 09:34:21
|
Here is the output of ddcinfo for the Samsung SyncMaster 900NF (NaturalFlat series, Mitsubishi DiamondTron CRT). The full user's manual with specifications is available at: http://downloadcenter.samsung.com/content/UM/200311/20031124100829750_BH59-00266G-06en_AQ19.pdf ______________________________ Output of "LANG= LC_ALL= ddccontrol -p -c -d" follows: ddccontrol version 0.4.2 Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...) Copyright 2004-2006 Nicolas Boichat (ni...@bo...) This program comes with ABSOLUTELY NO WARRANTY. You may redistribute copies of this program under the terms of the GNU General Public License. Probing for available monitors... Detected monitors : - Device: pci:00:0a.0-2 DDC/CI supported: Yes Monitor Name: VESA standard monitor Input type: Analog (Automatically selected) Reading EDID and initializing DDC/CI at bus pci:00:0a.0-2... EDID readings: Plug and Play ID: SAM002F [VESA standard monitor] Input type: Analog =============================== WARNING =============================== There is no support for your monitor in the database, but ddccontrol is using a basic generic profile. Many controls will not be supported, and some controls may not work as expected. Please update ddccontrol-db, or, if you are already using the latest version, please send the output of the following command to ddc...@li...: LANG= LC_ALL= ddccontrol -p -c -d Thank you. =============================== WARNING =============================== Capabilities: Raw output: (prot(monitor)type(crt)model(Phoenix(CPG Series))edid bin(128(################################################################################################################################ Parsed output: VCP: Type: CRT Controls (valid/current/max) [Description - Value name]: Control 0x01: +/0/255 [???] Control 0x10: +/8/40 [???] Control 0x12: +/255/255 [???] Control 0x14: +/0/3 [???] Control 0x16: +/113/255 [???] Control 0x18: +/111/255 [???] Control 0x1a: +/101/255 [???] Control 0x20: +/119/200 [???] Control 0x22: +/140/200 [???] Control 0x24: +/84/127 [???] Control 0x26: +/65/127 [???] Control 0x28: +/128/255 [???] Control 0x2a: +/123/255 [???] Control 0x30: +/69/100 [???] Control 0x32: +/70/127 [???] Control 0x38: +/128/255 [???] Control 0x3a: +/29/127 [???] Control 0x3c: +/45/127 [???] Control 0x40: +/63/127 [???] Control 0x42: +/50/100 [???] Control 0x44: +/160/255 [???] Control 0x46: +/62/127 [???] Control 0x48: +/64/127 [???] Control 0x4a: +/64/127 [???] Control 0x4c: +/64/127 [???] Control 0x56: +/0/127 [???] Control 0x58: +/28/127 [???] Control 0x6c: +/133/255 [???] Control 0x6e: +/137/255 [???] Control 0x70: +/172/255 [???] Control 0x88: +/135/255 [???] Control 0x92: +/17/60 [???] Control 0x94: +/24/60 [???] Control 0x96: +/30/60 [???] Control 0x98: +/30/60 [???] Control 0xa0: +/115/15 [???] Control 0xa1: +/44/94 [???] Control 0xa2: +/35/76 [???] Control 0xa3: +/71/121 [???] Control 0xa4: +/57/98 [???] Control 0xa5: +/37/47 [???] Control 0xa6: +/63/63 [???] Control 0xa7: +/63/63 [???] Control 0xa8: +/63/63 [???] Control 0xa9: +/38/63 [???] Control 0xaa: +/15/30 [???] Control 0xab: +/15/30 [???] Control 0xac: +/11328/0 [???] Control 0xae: +/52/0 [???] Control 0xaf: +/15/30 [???] Control 0xc5: +/128/255 [???] Control 0xc6: +/0/127 [???] Control 0xd8: +/152/255 [???] Control 0xd9: +/55/127 [???] Control 0xe6: +/69/255 [???] Control 0xe8: +/34/127 [???] Control 0xe9: +/0/255 [???] Control 0xee: +/64/127 [???] Control 0xf0: +/112/127 [???] Control 0xf6: +/181/255 [???] Control 0xff: +/0/255 [???] |