Re: [ddccontrol-users] another unsupported monitor: SGI GDM-5411

[Florin A. <fl...@an...>]

On Fri, 2006-03-10 at 23:50 +0100, Nicolas Boichat wrote:

> Could you please apply the attached patch, then run
> # LANG= LC_ALL= ./ddccontrol -p -c -d
> again on both monitors ?

Here's SGI GDM-5011P

# LANG= LC_ALL= ./ddccontrol -p -c -d
ddccontrol version 0.4.1
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU
General Public License.

Probing for available monitors..last_substr=60
Error: Can't convert value to int, invalid CAPS. @ddcci.c:661
I/O warning : failed to load external entity
"/opt/ddccontrol/share/ddccontrol-db/monitor/SGX0200.xml"
Document not parsed successfully.
I/O warning : failed to load external entity
"/opt/ddccontrol/share/ddccontrol-db/monitor/SGXcrt.xml"
Document not parsed successfully.
...
Detected monitors :
 - Device: pci:01:00.0-2
   DDC/CI supported: Yes
   Monitor Name: VESA standard monitor
   Input type: Analog
  (Automatically selected)
Reading EDID and initializing DDC/CI at bus pci:01:00.0-2...
last_substr=60
Error: Can't convert value to int, invalid CAPS. @ddcci.c:661
I/O warning : failed to load external entity
"/opt/ddccontrol/share/ddccontrol-db/monitor/SGX0200.xml"
Document not parsed successfully.
I/O warning : failed to load external entity
"/opt/ddccontrol/share/ddccontrol-db/monitor/SGXcrt.xml"
Document not parsed successfully.

EDID readings:
        Plug and Play ID: SGX0200 [VESA standard monitor]
        Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
last_substr=60
Error: Can't convert value to int, invalid CAPS. @ddcci.c:661
Raw output: (prot(monitor)  type(crt) model(SGX0002 )          edid
bin(128(################################################################################################################################))cmds(01020304050608090A0B0C4F)vcp(00010810121416181A20222426283032384042445660686C6E70E0F1F2F3F4)             vcpname(14(Color1 Color2 Color3)))
Parsed output:
        VCP: 00 01 08 10 12 14 16 18 1a 20 22 24 26 28 30 32 38 40 42 44
56 60 68 6c 6e 70 e0 f1 f2 f3 f4
        Type: CRT

Controls (valid/current/max) [Description - Value name]:
Control 0x00: +/0/0 C [Degauss]
Control 0x08: +/0/0 C [Restore Factory Default Color]
Control 0x10: +/154/255 C [Brightness]
Control 0x12: +/255/255 C [Contrast]
Control 0x14: +/2/2 C [???]
Control 0x16: +/239/255 C [Red maximum level]
Control 0x18: +/237/255 C [Green maximum level]
Control 0x1a: +/226/255 C [Blue maximum level]
Control 0x20: +/158/255 C [Horizontal Position]
Control 0x22: +/208/255 C [Horizontal Size]
Control 0x24: +/124/255 C [Horizontal Pincushion]
Control 0x26: +/135/255 C [Horizontal Pincushion Balance]
Control 0x28: +/138/255 C [Horizontal Misconvergence]
Control 0x30: +/149/255 C [Vertical Position]
Control 0x32: +/169/255 C [Vertical Size]
Control 0x38: +/161/255 C [Vertical Misconvergence]
Control 0x40: +/128/255 C [Parallelogram Distortion (Key Balance)]
Control 0x42: +/135/255 C [Trapezoidal Distortion (Key)]
Control 0x44: +/128/255 C [Rotation (Tilt)]
Control 0x56: +/0/63 C [Horizontal Moire]
Control 0x60: +/0/1 C [Input Source Select]
Control 0x68: +/1/5 C [???]
Control 0x86: +/223/255   [???]
Control 0x88: +/151/255   [???]
Control 0x8a: +/192/255   [???]
Control 0xa2: +/148/255   [???]
Control 0xa4: +/125/255   [???]
Control 0xa6: +/106/255   [???]
Control 0xa8: +/141/255   [???]
Control 0xe0: +/0/0 C [???]

-- 
Florin Andrei

http://florin.myip.org/