RE: [ddccontrol-users] DDCControl Doesn't Recognize SamsungSyncMaster 712N

[Wall, K. <kur...@ti...>]

It appears to work (that is, load and provide an interface) now.=20
When I get home this evening, I'll try modifying some settings=20
and report success or failure.

Thanks for the timely response.

Kurt


-----Original Message-----
From:	Nicolas Boichat [mailto:ni...@bo...]
Sent:	Mon 2005-07-25 12:55
To:	Wall, Kurt
Cc:	ddc...@li...
Subject:	Re: [ddccontrol-users] DDCControl Doesn't Recognize =
SamsungSyncMaster 712N
Hello,

Thanks for your report.

I added your monitor to the database.

Please save the attached file in ddccontrol-db/db/monitor and re-run
"make install" in ddccontrol-db.

Best regards,

Nicolas

On Sun, 2005-07-24 at 18:57 -0400, Wall, Kurt wrote:
> I have a Samnsung SyncMaster 712N, a 17-inch LCD monitor. In short, =
gddccontrol loads successfully, but there are no adjustable features =
once the GUI loads, I suspect because the corresponding monitor database =
file, SAM0124.xml, doesn't exist:
>=20
> Xinerama not supported
> Device: pci:01:00.0-0
> Error while reading write message answer: Bad message
> Reading EDID 0x50 failed.
> Device: pci:01:00.0-1
> Error while reading write message answer: Bad message
> Reading EDID 0x50 failed.
> Device: pci:01:00.0-2
> I/O warning : failed to load external entity =
"/usr/local/share/ddccontrol-db/monitor/SAM0124.xml"
> Document not parsed successfully.
> Corrupted EDID at 0x50.
> ioctl(): Remote I/O error
> ioctl returned -1
> Reading EDID 0x50 failed.
> I/O warning : failed to load external entity =
"/usr/local/share/ddccontrol-db/monitor/SAM0124.xml"
> Document not parsed successfully.
> currentid(-1) !=3D nextid(0), trying...
> Device: pci:01:00.0-2
> I/O warning : failed to load external entity =
"/usr/local/share/ddccontrol-db/monitor/SAM0124.xml"
> Document not parsed successfully.
>=20
> I've attached the output of ddccontrol -p -c -d.
>=20
> Kurt
>=20
--=20
Nicolas Boichat <ni...@bo...>