[ddccontrol-users] output of "LANG= LC_ALL= ddccontrol -p -c -d" for Acer AL1916

[Vlad O. <mo...@in...>]

ddccontrol version 0.4.2
Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...)
Copyright 2004-2006 Nicolas Boichat (ni...@bo...)
This program comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of this program under the terms of the GNU General 
Public License.

Probing for available monitors....I/O warning : failed to load external entity 
"/usr/share/ddccontrol-db/monitor/ACRAD49.xml"
Document not parsed successfully.
...
Detected monitors :
  - Device: dev:/dev/i2c-2
    DDC/CI supported: Yes
    Monitor Name: VESA standard monitor
    Input type: Analog
   (Automatically selected)
Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-2...
I/O warning : failed to load external entity 
"/usr/share/ddccontrol-db/monitor/ACRAD49.xml"
Document not parsed successfully.

EDID readings:
	Plug and Play ID: ACRAD49 [VESA standard monitor]
	Input type: Analog
=============================== WARNING ===============================
There is no support for your monitor in the database, but ddccontrol is
using a basic generic profile. Many controls will not be supported, and
some controls may not work as expected.
Please update ddccontrol-db, or, if you are already using the latest
version, please send the output of the following command to
ddc...@li...:

LANG= LC_ALL= ddccontrol -p -c -d

Thank you.
=============================== WARNING ===============================

Capabilities:
Raw output: (prot(monitor)type(LCD)model(AL1916)cmde(01 02 03 07 0C E3 F3)vcp(04 
05 06 08 0E 10 12 14(05 08 0B) 16 18 1A 1E  20 30 3E B6 C6 
DF)mswhql(1)asset_eep(40)mccs_ver(2.0))
Parsed output:
	VCP: 04 05 06 08 0e 10 12 14 16 18 1a 1e 20 30 3e b6 c6 df
	Type: Unknown

Controls (valid/current/max) [Description - Value name]:
Control 0x00: +/0/100   [???]
Control 0x02: +/2/2   [???]
Control 0x04: +/0/65535 C [Restore Factory Defaults]
Control 0x05: +/0/65535 C [Restore Brightness and Contrast]
Control 0x06: +/0/65535 C [Restore Factory Default Geometry]
Control 0x08: +/0/65535 C [Restore Factory Default Color]
Control 0x0b: +/3000/3000   [???]
Control 0x0c: +/1/2   [???]
Control 0x0e: +/50/100 C [Image Lock Coarse (Clock)]
Control 0x10: +/90/100 C [Brightness]
Control 0x12: +/61/100 C [Contrast]
Control 0x14: +/5/11 C [???]
Control 0x16: +/88/100 C [Red maximum level]
Control 0x18: +/95/100 C [Green maximum level]
Control 0x1a: +/80/100 C [Blue maximum level]
Control 0x1e: +/0/65535 C [Automatically adjust]
Control 0x1f: +/0/65535   [???]
Control 0x20: +/50/100 C [Horizontal Position]
Control 0x30: +/50/100 C [Vertical Position]
Control 0x3e: +/9/100 C [Image Lock Fine (Clock Phase)]
Control 0x52: +/10/255   [???]
Control 0x60: +/1/3   [???]
Control 0x6c: +/50/100   [???]
Control 0x6e: +/50/100   [???]
Control 0x70: +/50/100   [???]
Control 0xac: +/64200/0   [???]
Control 0xae: +/6030/0   [???]
Control 0xb2: +/1/1   [???]
Control 0xb6: +/3/5 C [???]
Control 0xc0: +/0/65535   [???]
Control 0xc6: +/120/65535 C [???]
Control 0xc8: +/9/65535   [???]
Control 0xc9: +/512/255   [???]
Control 0xca: +/1/2   [???]
Control 0xcc: +/2/10   [???]
Control 0xd6: +/1/5   [???]
Control 0xdf: +/512/65535 C [???]
Invalid response, first byte is 0xbe, should be 0x6e
be 6e 80 be 6e 80 be 6e 80 be 6e                | .n..n..n..n
Invalid response, first byte is 0x80, should be 0x6e
80 be 6e 80 be 6e 80 be 6e 80 be                | ..n..n..n..