Hi,
I'm using cutecom v. 0.22.0 that comes packaged with Ubuntu 10.04.
When I open cutecom, it shows no devices in the devices dropdown; my interface is on /dev/ttyUSB0, if I type it in by hand it works like a charm, but when i close and reopen it is gone.
I tried to wipe the config file, but with no success. I also removed the old config in ~/.qt, just in case, but nothing changed.
Here is my config file:
Hi,
I'm using cutecom v. 0.22.0 that comes packaged with Ubuntu 10.04.
When I open cutecom, it shows no devices in the devices dropdown; my interface is on /dev/ttyUSB0, if I type it in by hand it works like a charm, but when i close and reopen it is gone.
I tried to wipe the config file, but with no success. I also removed the old config in ~/.qt, just in case, but nothing changed.
Here is my config file:
HardwareHandshake=false
SoftwareHandshake=false
OpenForReading=true
OpenForWriting=false
DontApplySettings=false
Device=/dev/ttyUSB0
Baud=9
Databits=3
Parity=0
Stopbits=0
Protocol=0
width=756
height=648
LineMode=0
HexOutput=false
CharDelay=2
SendFileDialogStartDir=/home/panorama
LogFileName=/home/panorama/cutecom.log
AppendToLogFile=0
CurrentDevice=/dev/ttyUSB0
AllDevices=/dev/ttyS0, /dev/ttyS1, /dev/ttyS2, /dev/ttyS3, /dev/ttyUSB0
History=v
Could you give me any hint on what could be causing this issue?