CrazyScan / Blog: Recent posts
- Show RFLevel on carrier marker.
2017-07-23
Labels:
CrazyScan
- Maximum symbol rate increased to 70000 Ks
- Improved DVB-C search and lock for Silabs demods.
- Fixed TBS 6903/5/8 support (DVB-S detection)
- Added TBS 6528, 6590, 5520SE support
- Fix modulation info update.
- Optional DiSEqC 1.0 multiswitch command.
- Extended modulation, FEC and Roll-Off lists.
- Fix LNB params checking on loading.
- more precise freq selection on click
- SR selection for DVB-C in Carrier search dialog
- AirScan feature implemented
- StreamReaderEx-BDA 1.2.3.1330 and newer required !
- fixed link margin calculation for DVB-S
- more precise freq selection on click
- DVB-S2X specific modcodes, roll-offs
- Show preBER value as tooltip for BER field.
- StreamReaderEx-BDA 1.2.3.1300 and newer required !
- Fix setting tabs layout
- User-defined freq ranges selection in Range tab. Predefined ranges defined in ranges2.txt file
- Fixed RFLevel scaling sliders orientation.
- Show more info about DVB-T2 muxes (S1 signaling type, Pilot pattern, Payload type).
- StreamReaderEx-BDA 1.2.0.1223 and newer required !
- Modcode selection simplified.
- Detect available frame modcodes for DVB-S2 transponders in Carrier search dialog (if ModInv() supported).
- Mark unlockable transponders and ACM/VCM.
- User-defined freq ranges selection in Range tab. Predefined ranges defined in ranges.txt file.
- Move some style-specific checkboxes to Style tab.
- Save BLScan2 checkbox state in settings.
- StreamReaderEx-BDA 1.2.2.1248 and newer required !!!
- Additional modes for optional transponder info - SNR (Link Margin)
- Show link margin on SNR tooltip. Updated when modulation info update enabled.
- Save spectrum in csv files (optionaly when loop mode enabled)
- DVB-S2 Modcode filter support in carrier search dialog
- Update bitrate when enabled modulation params update
- StreamReaderEx-BDA 1.2.0+ required !!!
- Save transponder info in various format
- Remake motor dial in positioner dialog.
- Send RAW DiSEqC command (1-6 bytes) from Positioner dialog.
- Enable BlindScan button (after success Spectrum scan) only if BLScan() or BLScan2() supported for current device.
- Adjust IF Freq calculation depend from IFStart, IFStop, LNBMid, LNBStk option in streamreader.ini
- Compiled with MS VC2008-SP1, QT 4.8.5, QWT 6.0.2.
- ReqLibs updated (QT, QWT).