|
From: Rasmus M. <ras...@us...> - 2004-11-08 21:27:38
|
Update of /cvsroot/cpri/cpri/docs In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv4589 Modified Files: changes._tx cpri._tx readme._tx Log Message: Line endings Index: cpri._tx =================================================================== RCS file: /cvsroot/cpri/cpri/docs/cpri._tx,v retrieving revision 1.11 retrieving revision 1.12 diff -C2 -d -r1.11 -r1.12 *** cpri._tx 21 Jun 2004 19:15:47 -0000 1.11 --- cpri._tx 8 Nov 2004 21:27:23 -0000 1.12 *************** *** 1,794 **** ! @#This is the source for the CPRI manual, in Shawn's special format. ! @#The readable documents are generated and will be found in the files: ! @#cpri.txt,cpri.rtf, cpri.htm, cpri.inf, the latter may be ! @#installed as on-line help if you are using rhide (just add cpri to the ! @#list of help files) ! @# ! @multiwordheaders ! @manh="version 0.9.4" "CPRI" "Manual" ! @document_title=CPRI Manual ! @rtfh=cpri - an add on lib to CGUI for formatted printing [...1559 lines suppressed...] ! The "scaling" command changes the current scaling. Some measurements like ! positions and sizes are interpreted according to the current scaling.<br> ! Parameter: 0- sizes should be expressed in nr of "character boxes" in ! the default fix text size 1-(default) sizes should be expressed in mm ! ! @@const char* @CPRI_RESET ! The "reset" command resets the driver state to the initial state, and if ! possible, send a reset command to the driver <br> ! Parameter: none ! ! @headingnocontent ! Index ! ! @index ! ! @$@contents ! @$@bye ! ! @html ! @text Index: readme._tx =================================================================== RCS file: /cvsroot/cpri/cpri/docs/readme._tx,v retrieving revision 1.4 retrieving revision 1.5 diff -C2 -d -r1.4 -r1.5 *** readme._tx 21 Jun 2004 19:15:47 -0000 1.4 --- readme._tx 8 Nov 2004 21:27:23 -0000 1.5 *************** *** 1,208 **** ! @# This is the source for the CPRI readme file, in Allegro's custom format. ! @# Read allegro/docs/makedoc.c for a description of what is going on... ! @# ! @#ignore_css ! @multiwordheaders ! @#multiplefiles ! @#locale=latin1 ! @h=<html><head><title>#</title><body> ! @f=<p><hr><p><a href="readme.html">Back to Contents</a><p> ! @rtfh=Readme for CPRI ! @$\input texinfo ! @$@setfilename readme.inf ! @$@settitle Readme for CPRI ! @$@setchapternewpage odd ! @$@paragraphindent 0 ! @$@setchapternewpage off ! @# This should remain commented at the moment (dvi output) @$@finalout ! @$ ! @$@ifinfo ! @$@direntry ! @$* CPRI: (CPRI). Readme file for CPRI ! @$@end direntry ! @$This is the Info version of the CPRI readme file. ! @$ ! @$By Christer Sandberg ! @$@end ifinfo ! @$ ! @$@node Top, , (dir), (dir) ! @<html> ! @<head> ! @<title>Readme for CPRI</title> ! @<body> ! <center><b>A CGUI and Allegro addon for for formatted printing</b></center> ! <center><b>by Christer Sandberg and Rasmus Myklebust</b></center> ! <center>Email: <email>chr...@md...</a></center> ! <center>Homepage: <a href="http://www.idt.mdh.se/~csg/cgui/cguix">http://www.idt.mdh.se/~csg/cgui/cguix</a></center> ! <center><b>The readme file of CPRI</b></center> ! ! @!text ! @heading ! Contents ! ! @shortcontents ! ! @text ! @heading ! Introduction ! ! CPRI is a library with functions for pretty printing of tables or table-like ! printouts using the event queue of CGUI. It also provides a dialogue ! that lets the user modify the printer settings, and one for administration of ! the printer queues for the DJGPP platform. ! ! CPRI compiles on the following platforms: DOS/DJGPP, Linux, ! Windows/Mingw32 and Windows/MSVC. ! ! The current version have full functionality only on the DJGPP and Windows ! platforms, there are only stubs present for the other platforms. ! ! You need to have compiled and installed Allegro version 4.0 or later, as ! well as CGUI version 1.6 or later. ! ! ! @heading ! Requirements ! ! You need to have compiled and installed Allegro 4.0.x as well as CGUI 1.6.7 or later. ! You must set the environment variable ALLEGRO to point out your Allegro ! installation and set CGUIDIR to point to your CGUI installation. ! There are also other requirements like correctly installed compilers etc. ! but these are already fulfilled if you succeded in making Allegro (no ! additional requirements are needed). ! ! You can find Allegro at: ! http://alleg.sourceforge.net/ ! ! You can find CGUI at: ! http://www.mdh.se/~csg/cgui/ ! ! ! @heading ! Installation ! ! Installation goes in some simple steps, and should be familiar since it is ! similar to the installation procedure as of Allegro and CGUI: ! <ul> ! <li> ! Tell the installation process what platform you use. This is done by ! running one of the following:<br> ! <pre> ! fix.bat djgpp - to compile with DOS/DJGPP ! fix.bat mingw32 - to compile with Windows/MinGW32 ! fix.bat bcc32 - to compile with Windows/Borland C++ ! fix.bat msvc - to compile with Windows/MSVC ! fix.sh unix - to compile with Linux/gcc ! </pre><li> ! <li> ! Specify the path to your allegro installation by setting the environment ! variable ALLEGRO. E.g. if your allegro directory is c:\allegro then ! you must type <br> ! <pre> ! set ALLEGRO=c:\allegro ! </pre> ! or alternatively put that line into your autoexec file and restart. ! For unix users: ! <pre> ! export ALLEGRO=/home/user/allegro-4.0.3 ! </pre> ! or whatever is the name of your allegro directory. ! <li> ! Specify the path to your CGUI installation by setting the environment ! CGUIDIR the same way as ALLEGRO, e.g.<br> ! <pre> ! set CGUIDIR=c:\cgui ! </pre> ! <pre> ! export CGUIDIR=/home/user/cgui ! </pre> ! <li> ! Ensure that all CGUI's tools has been built: ! Make CGUI's directory to the current, e.g. type the command ! <pre> ! cd c:\cgui ! </pre> ! Build: ! <pre> ! make dat2c ! make mktext ! </pre> ! Return to the main directory of cbar, e.g.: ! <pre> ! cd c:\cpri ! </pre> ! <li> ! Compile the library. This is done by running "make" at the command line. ! <li> ! Install the files to common directories. This is done by running ! "make install" at the command line.<br> ! Linux/Unix specifics:<br> ! You need to be root to succeed with the installation command i.e. type the ! command<br> ! <pre> ! su -c "make install" ! </pre> ! and enter the root password when prompted for.<br> ! Alternatively, if you cannot be root you may install cpri to some other ! location by running "make install SYSTEM_DIR=<dir>", which will cause ! headers to be installed to <dir>/include and libraries to ! <dir>/lib. Default for <dir> is /usr/local.<br> ! To be able to link your program to an installation at some other location ! than the default you need to specifiy the paths when compiling and linking. ! </ul> ! That's it! You may also want to perform some of the optional steps: ! <ul><li> ! You can compile a debugging library by typing "make DEBUGMODE=1". To ! compile both the usual and the debug library in one step, type "make all". ! <li> ! To link your application with the debugging lib, link with -lcprid ! instead of -lcpri. ! <li> ! If you want to read the CPRI documentation with the Rhide online help ! system, go to the "Help / Syntax help / Files to search" menu, and add ! "ccom" after the existing "libc" entry (separated by a space). ! <li> ! If you want statically linked libraries under Unix or Windows just add ! "STATICLINK=1" at end of the make command. The static libraries ! require the statically linked versions of Allegro and CGUI. ! </ul> ! ! @heading ! MSys ! Users of the MSys environment needs to set the environment vaariable ! UNIX_TOOLS to 1 before make install is run. ! ! @heading ! Usage ! <ul><li> ! #include <cpri.h> in the top of each file that uses a function from ! the library. ! <li> ! If you link on the command line, link with '-lpri -lcgui -lalleg'. It is ! important that you specify the libraries in that order. If you want the ! ability to debug inside CPRI's functions, then link with '-lcprid' ! instead of '-lcpri'. ! <li> ! If you use RHIDE, go to the menu Options/Libraries and fill in cpri. It is ! important that cpri is above `cgui' and `alleg'. Don't forget to check the ! box to the left of the library. You have to replace cpri with cprid to ! include debugging information. ! <li> ! Before passing any printing commands you must have initialized both CGUI ! and CPRI. ! </ul> ! ! ! ! @heading ! Contact Info ! ! Email:<ul> ! chr...@md... ! </ul> ! Homepage:<ul> ! http://www.idt.mdh.se/~csg/cgui/cguix ! </ul> ! Telephone:<ul> ! +46.(0)21.38.10.66 ! </ul> --- 1,208 ---- ! @# This is the source for the CPRI readme file, in Allegro's custom format. ! @# Read allegro/docs/makedoc.c for a description of what is going on... ! @# ! @#ignore_css ! @multiwordheaders ! @#multiplefiles ! @#locale=latin1 ! @h=<html><head><title>#</title><body> ! @f=<p><hr><p><a href="readme.html">Back to Contents</a><p> ! @rtfh=Readme for CPRI ! @$\input texinfo ! @$@setfilename readme.inf ! @$@settitle Readme for CPRI ! @$@setchapternewpage odd ! @$@paragraphindent 0 ! @$@setchapternewpage off ! @# This should remain commented at the moment (dvi output) @$@finalout ! @$ ! @$@ifinfo ! @$@direntry ! @$* CPRI: (CPRI). Readme file for CPRI ! @$@end direntry ! @$This is the Info version of the CPRI readme file. ! @$ ! @$By Christer Sandberg ! @$@end ifinfo ! @$ ! @$@node Top, , (dir), (dir) ! @<html> ! @<head> ! @<title>Readme for CPRI</title> ! @<body> ! <center><b>A CGUI and Allegro addon for for formatted printing</b></center> ! <center><b>by Christer Sandberg and Rasmus Myklebust</b></center> ! <center>Email: <email>chr...@md...</a></center> ! <center>Homepage: <a href="http://www.idt.mdh.se/~csg/cgui/cguix">http://www.idt.mdh.se/~csg/cgui/cguix</a></center> ! <center><b>The readme file of CPRI</b></center> ! ! @!text ! @heading ! Contents ! ! @shortcontents ! ! @text ! @heading ! Introduction ! ! CPRI is a library with functions for pretty printing of tables or table-like ! printouts using the event queue of CGUI. It also provides a dialogue ! that lets the user modify the printer settings, and one for administration of ! the printer queues for the DJGPP platform. ! ! CPRI compiles on the following platforms: DOS/DJGPP, Linux, ! Windows/Mingw32 and Windows/MSVC. ! ! The current version have full functionality only on the DJGPP and Windows ! platforms, there are only stubs present for the other platforms. ! ! You need to have compiled and installed Allegro version 4.0 or later, as ! well as CGUI version 1.6 or later. ! ! ! @heading ! Requirements ! ! You need to have compiled and installed Allegro 4.0.x as well as CGUI 1.6.7 or later. ! You must set the environment variable ALLEGRO to point out your Allegro ! installation and set CGUIDIR to point to your CGUI installation. ! There are also other requirements like correctly installed compilers etc. ! but these are already fulfilled if you succeded in making Allegro (no ! additional requirements are needed). ! ! You can find Allegro at: ! http://alleg.sourceforge.net/ ! ! You can find CGUI at: ! http://www.mdh.se/~csg/cgui/ ! ! ! @heading ! Installation ! ! Installation goes in some simple steps, and should be familiar since it is ! similar to the installation procedure as of Allegro and CGUI: ! <ul> ! <li> ! Tell the installation process what platform you use. This is done by ! running one of the following:<br> ! <pre> ! fix.bat djgpp - to compile with DOS/DJGPP ! fix.bat mingw32 - to compile with Windows/MinGW32 ! fix.bat bcc32 - to compile with Windows/Borland C++ ! fix.bat msvc - to compile with Windows/MSVC ! fix.sh unix - to compile with Linux/gcc ! </pre><li> ! <li> ! Specify the path to your allegro installation by setting the environment ! variable ALLEGRO. E.g. if your allegro directory is c:\allegro then ! you must type <br> ! <pre> ! set ALLEGRO=c:\allegro ! </pre> ! or alternatively put that line into your autoexec file and restart. ! For unix users: ! <pre> ! export ALLEGRO=/home/user/allegro-4.0.3 ! </pre> ! or whatever is the name of your allegro directory. ! <li> ! Specify the path to your CGUI installation by setting the environment ! CGUIDIR the same way as ALLEGRO, e.g.<br> ! <pre> ! set CGUIDIR=c:\cgui ! </pre> ! <pre> ! export CGUIDIR=/home/user/cgui ! </pre> ! <li> ! Ensure that all CGUI's tools has been built: ! Make CGUI's directory to the current, e.g. type the command ! <pre> ! cd c:\cgui ! </pre> ! Build: ! <pre> ! make dat2c ! make mktext ! </pre> ! Return to the main directory of cbar, e.g.: ! <pre> ! cd c:\cpri ! </pre> ! <li> ! Compile the library. This is done by running "make" at the command line. ! <li> ! Install the files to common directories. This is done by running ! "make install" at the command line.<br> ! Linux/Unix specifics:<br> ! You need to be root to succeed with the installation command i.e. type the ! command<br> ! <pre> ! su -c "make install" ! </pre> ! and enter the root password when prompted for.<br> ! Alternatively, if you cannot be root you may install cpri to some other ! location by running "make install SYSTEM_DIR=<dir>", which will cause ! headers to be installed to <dir>/include and libraries to ! <dir>/lib. Default for <dir> is /usr/local.<br> ! To be able to link your program to an installation at some other location ! than the default you need to specifiy the paths when compiling and linking. ! </ul> ! That's it! You may also want to perform some of the optional steps: ! <ul><li> ! You can compile a debugging library by typing "make DEBUGMODE=1". To ! compile both the usual and the debug library in one step, type "make all". ! <li> ! To link your application with the debugging lib, link with -lcprid ! instead of -lcpri. ! <li> ! If you want to read the CPRI documentation with the Rhide online help ! system, go to the "Help / Syntax help / Files to search" menu, and add ! "ccom" after the existing "libc" entry (separated by a space). ! <li> ! If you want statically linked libraries under Unix or Windows just add ! "STATICLINK=1" at end of the make command. The static libraries ! require the statically linked versions of Allegro and CGUI. ! </ul> ! ! @heading ! MSys ! Users of the MSys environment needs to set the environment vaariable ! UNIX_TOOLS to 1 before make install is run. ! ! @heading ! Usage ! <ul><li> ! #include <cpri.h> in the top of each file that uses a function from ! the library. ! <li> ! If you link on the command line, link with '-lpri -lcgui -lalleg'. It is ! important that you specify the libraries in that order. If you want the ! ability to debug inside CPRI's functions, then link with '-lcprid' ! instead of '-lcpri'. ! <li> ! If you use RHIDE, go to the menu Options/Libraries and fill in cpri. It is ! important that cpri is above `cgui' and `alleg'. Don't forget to check the ! box to the left of the library. You have to replace cpri with cprid to ! include debugging information. ! <li> ! Before passing any printing commands you must have initialized both CGUI ! and CPRI. ! </ul> ! ! ! ! @heading ! Contact Info ! ! Email:<ul> ! chr...@md... ! </ul> ! Homepage:<ul> ! http://www.idt.mdh.se/~csg/cgui/cguix ! </ul> ! Telephone:<ul> ! +46.(0)21.38.10.66 ! </ul> Index: changes._tx =================================================================== RCS file: /cvsroot/cpri/cpri/docs/changes._tx,v retrieving revision 1.6 retrieving revision 1.7 diff -C2 -d -r1.6 -r1.7 *** changes._tx 21 Jun 2004 19:15:47 -0000 1.6 --- changes._tx 8 Nov 2004 21:27:23 -0000 1.7 *************** *** 1,95 **** ! @# ! @# This is the source for the CPRI changes file, in Allegro's custom format. ! @# Read allegro/docs/makedoc.c for a description of what is going on... ! @# ! @#ignore_css ! @multiwordheaders ! @document_title=CPRI Changes ! @rtfh=Changes in CPRI ! @$\input texinfo ! @$@setfilename changes.inf ! @$@settitle Changes in CPRI ! @$@setchapternewpage odd ! @$@paragraphindent 0 ! @$@setchapternewpage off ! @# This should remain commented at the moment (dvi output) @$@finalout ! @$ ! @$@ifinfo ! @$@direntry ! @$* Changes: (changes). Changes in CPRI ! @$@end direntry ! @$This is the Info version of the Changes in CPRI file. ! @$ ! @$By Christer Sandberg ! @$@end ifinfo ! @$ ! @$@node Top, , (dir), (dir) ! @<html> ! @<head> ! @<title>Changes in CPRI</title> ! @<body> ! <center><b>A CGUI and Allegro addon for formatted printing</b></center> ! <center><b>by Christer Sandberg and Rasmus Myklebust</b></center> ! <center>Email: <email>chr...@md...</a></center> ! <center>Homepage: <a href="http://www.idt.mdh.se/~csg/cgui/cguix">http://www.idt.mdh.se/~csg/cgui/cguix</a></center> ! <center><b> ! The changes log of CPRI ! </b></center> ! @!text ! ! @heading ! Changes ! ! 0.9.4: ! <ul> ! <li> ! Fixed bug 888505 Doesn't build on Linux ! <li> ! Clearified some stuff in the readme. ! <li> ! Removed implicit dependency to allegro 4.1.* (dat2c) ! </ul> ! 0.9.3: ! <ul> ! <li> Fixed bug #859562 "Html-tables shows garbage when using CPRI_SUP_LALIGN" - added case for CPRI_SUP_LALIGN ! </ul> ! 0.9.2: ! <ul> ! <li> ! The application will not exit in release-mode when resetDC fails. ! <li> ! Fixed bug #841108 "Textfiles are not clean" (unprintable chars like form feed in the files) ! <li> ! Fixed bug #841105 "Second printout to text file prints only first row" ! <li> ! Fixed bug "Fixed textfile printing" (various fixes to the text file driver) ! <li> ! Fixed a bug with alligned index printing in the driver for standard windows printing. ! <li> ! Fixed bug #827139 "Landscape in W98". ! <li> ! Adapted to build under Msys ! <li> ! Fixed bug #742863 "Linux build" ! <li> ! Fixed bug #731192 "Bug in width calculation" (some drivers) ! <li> ! Fixed bug #731191 "Bug in the html-driver" ! <li> ! Fixed bug #727717 "Build problem -mingw32" ! </ul> ! ! 0.9.1: ! <ul> ! <li> ! Bug fixed: A line could be dropped between two pages in table print outs (windows) ! <li> ! Added some features that were lacking in the windows version: manuel feed, ! selection of orientation, adjustable bar-code width and height ! </ul> ! ! 0.9.0: ! <ul> ! <li> ! Initial official version. ! </ul> --- 1,95 ---- ! @# ! @# This is the source for the CPRI changes file, in Allegro's custom format. ! @# Read allegro/docs/makedoc.c for a description of what is going on... ! @# ! @#ignore_css ! @multiwordheaders ! @document_title=CPRI Changes ! @rtfh=Changes in CPRI ! @$\input texinfo ! @$@setfilename changes.inf ! @$@settitle Changes in CPRI ! @$@setchapternewpage odd ! @$@paragraphindent 0 ! @$@setchapternewpage off ! @# This should remain commented at the moment (dvi output) @$@finalout ! @$ ! @$@ifinfo ! @$@direntry ! @$* Changes: (changes). Changes in CPRI ! @$@end direntry ! @$This is the Info version of the Changes in CPRI file. ! @$ ! @$By Christer Sandberg ! @$@end ifinfo ! @$ ! @$@node Top, , (dir), (dir) ! @<html> ! @<head> ! @<title>Changes in CPRI</title> ! @<body> ! <center><b>A CGUI and Allegro addon for formatted printing</b></center> ! <center><b>by Christer Sandberg and Rasmus Myklebust</b></center> ! <center>Email: <email>chr...@md...</a></center> ! <center>Homepage: <a href="http://www.idt.mdh.se/~csg/cgui/cguix">http://www.idt.mdh.se/~csg/cgui/cguix</a></center> ! <center><b> ! The changes log of CPRI ! </b></center> ! @!text ! ! @heading ! Changes ! ! 0.9.4: ! <ul> ! <li> ! Fixed bug 888505 Doesn't build on Linux ! <li> ! Clearified some stuff in the readme. ! <li> ! Removed implicit dependency to allegro 4.1.* (dat2c) ! </ul> ! 0.9.3: ! <ul> ! <li> Fixed bug #859562 "Html-tables shows garbage when using CPRI_SUP_LALIGN" - added case for CPRI_SUP_LALIGN ! </ul> ! 0.9.2: ! <ul> ! <li> ! The application will not exit in release-mode when resetDC fails. ! <li> ! Fixed bug #841108 "Textfiles are not clean" (unprintable chars like form feed in the files) ! <li> ! Fixed bug #841105 "Second printout to text file prints only first row" ! <li> ! Fixed bug "Fixed textfile printing" (various fixes to the text file driver) ! <li> ! Fixed a bug with alligned index printing in the driver for standard windows printing. ! <li> ! Fixed bug #827139 "Landscape in W98". ! <li> ! Adapted to build under Msys ! <li> ! Fixed bug #742863 "Linux build" ! <li> ! Fixed bug #731192 "Bug in width calculation" (some drivers) ! <li> ! Fixed bug #731191 "Bug in the html-driver" ! <li> ! Fixed bug #727717 "Build problem -mingw32" ! </ul> ! ! 0.9.1: ! <ul> ! <li> ! Bug fixed: A line could be dropped between two pages in table print outs (windows) ! <li> ! Added some features that were lacking in the windows version: manuel feed, ! selection of orientation, adjustable bar-code width and height ! </ul> ! ! 0.9.0: ! <ul> ! <li> ! Initial official version. ! </ul> |
