Re: [Contiki-developers] STM32W

[Giacomo T. <gia...@gm...>]

I tried to treat ttyACM0 as ttyUSB0 but i have problem with the
stm32w_flasher and also with the serialdump-linux. For
serialdump-linux (in the tools/stm32w folder) i tried with -b115200
/dev/ttyACM0 but in all configuration i can obtain only the first line
of the output (Contiki starts on...) and i can't read more data. For
stm32w_flasher i installed hal and libssl0.9.8 but the utility says:

INFO: STM32W flasher utility version 2.0.0b2  for Linux
ERROR: Failed to get firmware type: Invalid reply
ERROR: Trouble while resetting board on port : '/dev/ttyACM0'
ERROR: Error while initiliazing interface

Do you have a solution?

Thanks in advance
Giacomo Tanganelli

Il 19 aprile 2012 20:29, Konstantin Klubnichkin
<kkl...@gm...> ha scritto:
> Hello!
>
> It's not a problem at all, just treat ttyACM0 as ttyUSB0.
> You may face an issues with programming, if so - contact me, I've solved it.
>
> 2012/4/19 Giacomo Tanganelli <gia...@gm...>
>>
>> I read in a previous message that someone was able to flash both
>> MB951A and MB950 in Ubuntu after an Ubuntu upgrade. i'm using Ubuntu
>> 11.10 now but i'm not able to flash and also i can not use serialdump
>> or any other tools like minicom or putty. When i put MB951 or MB950
>> Ubuntu recognize them as ttyACM0 instead of ttyUSBx or ttySx. Does
>> anyone know how to solve this problem? Or maybe tell me which Ubuntu
>> upgrade is necessary?
>>
>> thanks in advance
>> Giacomo Tanganelli
>>
>>
>> ------------------------------------------------------------------------------
>> For Developers, A Lot Can Happen In A Second.
>> Boundary is the first to Know...and Tell You.
>> Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
>> http://p.sf.net/sfu/Boundary-d2dvs2
>> _______________________________________________
>> Contiki-developers mailing list
>> Con...@li...
>> https://lists.sourceforge.net/lists/listinfo/contiki-developers
>
>
>
>
> --
> Best regards,
> Konstantin Klubnichkin
>
> ------------------------------------------------------------------------------
> For Developers, A Lot Can Happen In A Second.
> Boundary is the first to Know...and Tell You.
> Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
> http://p.sf.net/sfu/Boundary-d2dvs2
> _______________________________________________
> Contiki-developers mailing list
> Con...@li...
> https://lists.sourceforge.net/lists/listinfo/contiki-developers
>