From: colinux <co...@ov...> - 2011-06-27 23:21:17
|
Hi guys, I'm having trouble getting colinux working. I can get it to boot, but it doesn't seem to mount udev or sysfs. it seems to find my linux install and go through some of the motions. What is going wrong? what should I do to troubleshoot? There is nothing in the logs ( mounting read only ) . See below for console dump. Thanks, -Dave Linux version 2.6.33.7-co-0.7.9 (hn@hn-dt) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 PREEMPT Sat Apr 9 20:30:51 UTC 2011 Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Warning only 871MB will be used. Use a HIGHMEM enabled kernel. init_memory_mapping: 0000000000000000-00000000367fe000 984MB LOWMEM available. mapped low ram: 0 - 367fe000 low ram: 0 - 3d800000 initrd enabled: 0xfd79a000-0xfd7ff881 size: 0x00065881 Zone PFN ranges: Normal 0x00000000 -> 0x0003d800 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x0003d800 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 249936 Kernel command line: root=/dev/cobd0 ro PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Memory: 977536k/1007616k available (2450k kernel code, 0k reserved, 780k data, 140k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) colinux : 0xfe800000 - 0xffc00000 ( 20 MB) vmalloc : 0xfe000000 - 0xfe7fe000 ( 7 MB) lowmem : 0xc0000000 - 0xfd800000 ( 984 MB) .init : 0xc1328000 - 0xc134b000 ( 140 kB) .data : 0xc1264bb0 - 0xc1327d68 ( 780 kB) .text : 0xc1000000 - 0xc1264bb0 (2450 kB) NR_IRQS:224 Setting proxy interrupt vectors (0..223) Console: colour CoCON 120x78 console [tty0] enabled Calibrating delay loop... 7654.60 BogoMIPS (lpj=38273024) Mount-cache hash table entries: 512 Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 CPU: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 Checking 'hlt' instruction... OK. NET: Registered protocol family 16 bio: create slab<bio-0> at 0 SCSI subsystem initialized PCI: Probing PCI hardware NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 406k freed audit: initializing netlink socket (disabled) type=2000 audit(1309107133.340:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1910 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered brd: module loaded cobd: loaded (max 32 devices) loop: module loaded conet0: irq 10, HWAddr 02:00:00:00:00:02 serio: cokbd at irq 1 mice: PS/2 mouse device common for all mice TCP cubic registered NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /devices/serio0/input/input0 RAMDISK: gzip image found at block 0 VFS: Mounted root (ext2 filesystem) on device 1:0. =========================================================================== # This process will install (if necessary) the coLinux modules for the # coLinux kernel. =========================================================================== Determining /, Found. Mounting / REISERFS warning (device cobd0): sh-2021 reiserfs_fill_super: can not find reiserfs on cobd0 EXT3-fs (cobd0): error: couldn't mount because of unsupported optional features (240) EXT2-fs (cobd0): error: couldn't mount because of unsupported optional features (240) EXT4-fs (cobd0): mounted filesystem with ordered data mode Modules already installed. Closing / EXT3-fs (cobd0): error: couldn't mount because of unsupported optional features (240) EXT2-fs (cobd0): error: couldn't mount because of unsupported optional features (240) EXT4-fs (cobd0): mounted filesystem with ordered data mode VFS: Mounted root (ext4 filesystem) readonly on device 117:0. Trying to move old root to /initrd ... /initrd does not exist. Ignored. Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 140k freed init: Failed to spawn readahead-collector main process: unable to open console: No such file or directory init: Failed to spawn readahead-collector post-stop process: unable to open console: No such file or directory /etc/init.d/functions: line 22: /dev/null: Read-only file system init: readahead main process (877) terminated with status 1 /etc/rc.d/rc.sysinit: line 21: /dev/null: Read-only file system /etc/rc.d/rc.sysinit: line 24: /dev/null: Read-only file system /etc/init.d/functions: line 22: /dev/null: Read-only file system Welcome to Scientific Linux /etc/rc.d/rc.sysinit: line 114: /dev/null: Read-only file system /etc/rc.d/rc.sysinit: line 121: /dev/null: Read-only file system /etc/rc.d/rc.sysinit: line 134: /dev/null: Read-only file system /etc/sysconfig/modules/bluez-uinput.modules: line 4: /dev/null: Read-only file system /etc/rc.d/rc.sysinit: line 149: /dev/null: Read-only file system /etc/rc.d/rc.sysinit: line 154: /dev/null: Read-only file system Setting hostname gargantua: [ OK ] /etc/rc.d/rc.sysinit: line 161: /dev/null: Read-only file system /etc/rc.d/rc.sysinit: line 164: /dev/null: Read-only file system /etc/rc.d/rc.sysinit: line 165: /dev/null: Read-only file system /etc/rc.d/rc.sysinit: line 182: /dev/null: Read-only file system ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point ERROR: finding sysfs mount point Setting up Logical Volume Management: Failed to find sysfs mount point read_urandom: /dev/urandom: open failed: No such file or directory |