Menu
▾
▴
[coLinux-devel] [ colinux-Bugs-1428974 ] colinux 6.3 freezes windows 2003
|
From: SourceForge.net <no...@so...> - 2006-06-21 14:03:12
|
Bugs item #1428974, was opened at 2006-02-10 01:40 Message generated for change (Comment added) made by nobody You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=1428974&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Closed Resolution: Fixed Priority: 5 Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: colinux 6.3 freezes windows 2003 Initial Comment: Colinux 6.3rc4 worked fine. Then I installed the colinux 6.3 release version. Starting the colinux service made my system inoperable. Keyboard and mouse didn't respond. After waiting for 10 minutes, I pressed the power off button. I reinstalled the rc4 version. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2006-06-21 07:03 Message: Logged In: NO Me too, AMD Athlon 1600+ and coLinux-0.6.3 stable on XP crashed when it attempted to run initrd. Commenting out initrd in default.colinux.xml fixed the problem. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2006-05-21 18:40 Message: Logged In: NO I had a similar problem with a very different computer configuration: Windows 2000 Professional Service Pack 4 (build 2195) 900 megahertz AMD Athlon 128 kilobyte primary memory cache 256 kilobyte secondary memory cache Bus Clock: 100 megahertz BIOS: Compaq 786K1 10/12/2000 896 Megabytes Installed Memory My coLinux-0.6.3 stable release crashed (reboot) the Windows 2000 when it attempted to run initrd. Commenting out initrd in default.colinux.xml fixed the problem. This was running root disk image Gentoo-2005.1-stage3-ext3.bz2 from sourceforge. You can contact me at colinix at mauidude dot com. ---------------------------------------------------------------------- Comment By: Patrick MONNERAT (monnerat) Date: 2006-03-28 04:10 Message: Logged In: YES user_id=322655 That's it ! Many thanks I suppressed the <initrd> tag in the configuration file and it works. I did not even had to try the rc4 version... This behaviour tends to show its possible to run colinux on a pentium M with a prepackaged filesystem image, but that this processor is not suitable for bootstraping. Perhaps a line in the FAQ would be convenient... Many thanks again for the help. ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2006-03-27 10:04 Message: Logged In: YES user_id=579204 Please try to run without inird. You need this only for first boot, and for new/fresh images to installing modules under /lb/modules. Initrd is not need to run coLinx. About Windows 2003 and colinux as Service have nothing to say, don't have it. Windows 2000 was tested and runs. Henry ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2006-03-27 09:51 Message: Logged In: YES user_id=579204 http://home.arcor.de/henryn/colinux/testing/stable-2.6.11- hn/20060119/ this is the older 0.6.3-rc4 Henry ---------------------------------------------------------------------- Comment By: Patrick MONNERAT (monnerat) Date: 2006-03-27 05:55 Message: Logged In: YES user_id=322655 Same problem here: Windows XP pro SP2 Sony VAIO PCG 6H1M 1GRam Intel Pentium M 2.0Ghz The same setup is perfectly OK on a 2Ghz pentium 4 single- threaded with XP pro SP2. I tried all possible combinations of /(No)Execute /(No)Pae switches in boot.ini, without success. The last message displayed before total freeze is: RAMDISK: Compressed image found at 0 rc4 is not available anyfore for download... so I can't try ... Thanks for reply and action ---------------------------------------------------------------------- Comment By: Avijit Ghosh (avjt) Date: 2006-03-27 00:38 Message: Logged In: YES user_id=1248713 Happens with my setup too--- Windows XP Professional 2002 Dell Latitude D600 Intel Pentium M 1.80 GHz The configuration was --- ----------------------------------------------------------- <?xml version="1.0" encoding="UTF-8"?> <colinux> <block_device index="0" path="\DosDevices\f:\colinux.fs" enabled="true" /> <bootparams>root=/dev/cobd0</bootparams> <initrd path="initrd.gz" /> <image path="vmlinux" /> <memory size="128" /> </colinux> ----------------------------------------------------------- And just like in the original bug report by Anonymous, this configuration (and more complex configurations with TAP, SLIRP, one COFS and 3 COBD) works fine with the 0.6.3-rc4 version. The problem happens when invoked as a service --- AND also when invoked directly from the command line with '-c ...'. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=1428974&group_id=98788 |