Hi all, i using sphinxtrain-08, pocketphinx-0.8 and sphinxbase-0.8. i have error:
Sphinxtrain path: /usr/local/lib/sphinxtrain
Sphinxtrain binaries path: /usr/local/libexec/sphinxtrain
Running the training
MODULE: 000 Computing feature from audio files
Extracting features from segments starting at (part 1 of 1)
Extracting features from segments starting at (part 1 of 1)
Feature extraction is done
MODULE: 00 verify training files
Phase 1: Checking to see if the dict and filler dict agrees with the phonelist file.
Found 5 words using 6 phones
Phase 2: Checking to make sure there are not duplicate entries in the dictionary
Phase 3: Check general format for the fileids file; utterance length (must be positive); files exist
Phase 4: Checking number of lines in the transcript file should match lines in fileids file
Phase 5: Determine amount of training data, see if n_tied_states seems reasonable.
Estimated Total Hours Training: 0.00329444444444444
This is a small amount of data, no comment at this time
Phase 6: Checking that all the words in the transcript are in the dictionary
Words in dictionary: 2
Words in filler dictionary: 3
Phase 7: Checking that all the phones in the transcript are in the phonelist, and all phones in the phonelist appear at least once
MODULE: 0000 train grapheme-to-phoneme model
Skipped (set $CFG_G2P_MODEL = 'yes' to enable)
MODULE: 01 Train LDA transformation
Skipped (set $CFG_LDA_MLLT = 'yes' to enable)
MODULE: 02 Train MLLT transformation
Skipped (set $CFG_LDA_MLLT = 'yes' to enable)
MODULE: 05 Vector Quantization
Skipped for continuous models
MODULE: 10 Training Context Independent models for forced alignment and VTLN
Skipped: $ST::CFG_FORCEDALIGN set to 'no' in sphinx_train.cfg
Skipped: $ST::CFG_VTLN set to 'no' in sphinx_train.cfg
MODULE: 11 Force-aligning transcripts
Skipped: $ST::CFG_FORCEDALIGN set to 'no' in sphinx_train.cfg
MODULE: 12 Force-aligning data for VTLN
Skipped: $ST::CFG_VTLN set to 'no' in sphinx_train.cfg
MODULE: 20 Training Context Independent models
Phase 1: Cleaning up directories:
accumulator...logs...qmanager...models...
Phase 2: Flat initialize
Phase 3: Forward-Backward
Baum welch starting for 1 Gaussian(s), iteration: 1 (1 of 1)
0%
This step had 20 ERROR messages and 1 WARNING messages. Please check the log file for details.
Training failed in iteration 1
MODULE: 30 Training Context Dependent models
Phase 1: Cleaning up directories:
accumulator...logs...qmanager...
Phase 2: Initialization
This step had 1 ERROR messages and 0 WARNING messages. Please check the log file for details.
Phase 3: Forward-Backward
Baum welch starting for iteration: 1 (1 of 1)
0%
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
Only 0 parts of 1 of Baum Welch were successfully completed
Parts 1 failed to run!
Training failed in iteration 1
MODULE: 40 Build Trees
Phase 1: Cleaning up old log files...
Phase 2: Make Questions
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
Phase 3: Tree building
Processing each phone with each state
D 0
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
D 1
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
D 2
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
AO 0
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
AO 1
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
AO 2
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
NG 0
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
NG 1
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
NG 2
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
M 0
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
M 1
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
M 2
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
OW 0
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
OW 1
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
OW 2
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
Skipping SIL
MODULE: 45 Prune Trees
Phase 1: Tree Pruning
This step had 1 ERROR messages and 0 WARNING messages. Please check the log file for details.
Phase 2: State Tying
This step had 1 ERROR messages and 0 WARNING messages. Please check the log file for details.
MODULE: 50 Training Context dependent models
Phase 1: Cleaning up directories:
accumulator...logs...qmanager...
Phase 2: Copy CI to CD initialize
This step had 1 ERROR messages and 0 WARNING messages. Please check the log file for details.
Phase 3: Forward-Backward
Baum welch starting for 1 Gaussian(s), iteration: 1 (1 of 1)
0%
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
Only 0 parts of 1 of Baum Welch were successfully completed
Parts 1 failed to run!
Training failed in iteration 1
MODULE: 60 Lattice Generation
Skipped: $ST::CFG_MMIE set to 'no' in sphinx_train.cfg
MODULE: 61 Lattice Pruning
Skipped: $ST::CFG_MMIE set to 'no' in sphinx_train.cfg
MODULE: 62 Lattice Format Conversion
Skipped: $ST::CFG_MMIE set to 'no' in sphinx_train.cfg
MODULE: 65 MMIE Training
Skipped: $ST::CFG_MMIE set to 'no' in sphinx_train.cfg
MODULE: 90 deleted interpolation
Skipped for continuous models
MODULE: DECODE Decoding using models previously trained
Decoding 10 segments starting at 0 (part 1 of 1)
0%
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
Aligning results to find error rate
Can't open /home/pi/an4/result/an4-1-1.match
word_align.pl failed with error code 65280 at /usr/local/lib/sphinxtrain/scripts/decode/slave.pl line 173.
help me please.
thanks you verr much.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi all, i using sphinxtrain-08, pocketphinx-0.8 and sphinxbase-0.8. i have error:
Sphinxtrain path: /usr/local/lib/sphinxtrain
Sphinxtrain binaries path: /usr/local/libexec/sphinxtrain
Running the training
MODULE: 000 Computing feature from audio files
Extracting features from segments starting at (part 1 of 1)
Extracting features from segments starting at (part 1 of 1)
Feature extraction is done
MODULE: 00 verify training files
Phase 1: Checking to see if the dict and filler dict agrees with the phonelist file.
Found 5 words using 6 phones
Phase 2: Checking to make sure there are not duplicate entries in the dictionary
Phase 3: Check general format for the fileids file; utterance length (must be positive); files exist
Phase 4: Checking number of lines in the transcript file should match lines in fileids file
Phase 5: Determine amount of training data, see if n_tied_states seems reasonable.
Estimated Total Hours Training: 0.00329444444444444
This is a small amount of data, no comment at this time
Phase 6: Checking that all the words in the transcript are in the dictionary
Words in dictionary: 2
Words in filler dictionary: 3
Phase 7: Checking that all the phones in the transcript are in the phonelist, and all phones in the phonelist appear at least once
MODULE: 0000 train grapheme-to-phoneme model
Skipped (set $CFG_G2P_MODEL = 'yes' to enable)
MODULE: 01 Train LDA transformation
Skipped (set $CFG_LDA_MLLT = 'yes' to enable)
MODULE: 02 Train MLLT transformation
Skipped (set $CFG_LDA_MLLT = 'yes' to enable)
MODULE: 05 Vector Quantization
Skipped for continuous models
MODULE: 10 Training Context Independent models for forced alignment and VTLN
Skipped: $ST::CFG_FORCEDALIGN set to 'no' in sphinx_train.cfg
Skipped: $ST::CFG_VTLN set to 'no' in sphinx_train.cfg
MODULE: 11 Force-aligning transcripts
Skipped: $ST::CFG_FORCEDALIGN set to 'no' in sphinx_train.cfg
MODULE: 12 Force-aligning data for VTLN
Skipped: $ST::CFG_VTLN set to 'no' in sphinx_train.cfg
MODULE: 20 Training Context Independent models
Phase 1: Cleaning up directories:
accumulator...logs...qmanager...models...
Phase 2: Flat initialize
Phase 3: Forward-Backward
Baum welch starting for 1 Gaussian(s), iteration: 1 (1 of 1)
0%
This step had 20 ERROR messages and 1 WARNING messages. Please check the log file for details.
Training failed in iteration 1
MODULE: 30 Training Context Dependent models
Phase 1: Cleaning up directories:
accumulator...logs...qmanager...
Phase 2: Initialization
This step had 1 ERROR messages and 0 WARNING messages. Please check the log file for details.
Phase 3: Forward-Backward
Baum welch starting for iteration: 1 (1 of 1)
0%
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
Only 0 parts of 1 of Baum Welch were successfully completed
Parts 1 failed to run!
Training failed in iteration 1
MODULE: 40 Build Trees
Phase 1: Cleaning up old log files...
Phase 2: Make Questions
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
Phase 3: Tree building
Processing each phone with each state
D 0
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
D 1
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
D 2
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
AO 0
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
AO 1
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
AO 2
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
NG 0
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
NG 1
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
NG 2
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
M 0
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
M 1
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
M 2
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
OW 0
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
OW 1
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
OW 2
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
Skipping SIL
MODULE: 45 Prune Trees
Phase 1: Tree Pruning
This step had 1 ERROR messages and 0 WARNING messages. Please check the log file for details.
Phase 2: State Tying
This step had 1 ERROR messages and 0 WARNING messages. Please check the log file for details.
MODULE: 50 Training Context dependent models
Phase 1: Cleaning up directories:
accumulator...logs...qmanager...
Phase 2: Copy CI to CD initialize
This step had 1 ERROR messages and 0 WARNING messages. Please check the log file for details.
Phase 3: Forward-Backward
Baum welch starting for 1 Gaussian(s), iteration: 1 (1 of 1)
0%
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
Only 0 parts of 1 of Baum Welch were successfully completed
Parts 1 failed to run!
Training failed in iteration 1
MODULE: 60 Lattice Generation
Skipped: $ST::CFG_MMIE set to 'no' in sphinx_train.cfg
MODULE: 61 Lattice Pruning
Skipped: $ST::CFG_MMIE set to 'no' in sphinx_train.cfg
MODULE: 62 Lattice Format Conversion
Skipped: $ST::CFG_MMIE set to 'no' in sphinx_train.cfg
MODULE: 65 MMIE Training
Skipped: $ST::CFG_MMIE set to 'no' in sphinx_train.cfg
MODULE: 90 deleted interpolation
Skipped for continuous models
MODULE: DECODE Decoding using models previously trained
Decoding 10 segments starting at 0 (part 1 of 1)
0%
This step had 2 ERROR messages and 0 WARNING messages. Please check the log file for details.
Aligning results to find error rate
Can't open /home/pi/an4/result/an4-1-1.match
word_align.pl failed with error code 65280 at /usr/local/lib/sphinxtrain/scripts/decode/slave.pl line 173.
help me please.
thanks you verr much.
and file log decode:
INFO: cmd_ln.c(691): Parsing command line:
pocketsphinx_batch \
-hmm /home/pi/an4/model_parameters/an4.cd_cont_200 \
-lw 10 \
-feat 1s_c_d_dd \
-beam 1e-80 \
-wbeam 1e-40 \
-dict /home/pi/an4/etc/an4.dic \
-lm /home/pi/an4/etc/an4.lm.DMP \
-wip 0.2 \
-ctl /home/pi/an4/etc/an4_test.fileids \
-ctloffset 0 \
-ctlcount 10 \
-cepdir /home/pi/an4/feat \
-cepext .mfc \
-hyp /home/pi/an4/result/an4-1-1.match \
-agc none \
-varnorm no \
-cmn current
Current configuration:
[NAME] [DEFLT] [VALUE]
-adchdr 0 0
-adcin no no
-agc none none
-agcthresh 2.0 2.000000e+00
-alpha 0.97 9.700000e-01
-argfile
-ascale 20.0 2.000000e+01
-aw 1 1
-backtrace no no
-beam 1e-48 1.000000e-80
-bestpath yes yes
-bestpathlw 9.5 9.500000e+00
-bghist no no
-build_outdirs yes yes
-cepdir /home/pi/an4/feat
-cepext .mfc .mfc
-ceplen 13 13
-cmn current current
-cmninit 8.0 8.0
-compallsen no no
-ctl /home/pi/an4/etc/an4_test.fileids
-ctlcount -1 10
-ctlincr 1 1
-ctloffset 0 0
-ctm
-debug 0
-dict /home/pi/an4/etc/an4.dic
-dictcase no no
-dither no no
-doublebw no no
-ds 1 1
-fdict
-feat 1s_c_d_dd 1s_c_d_dd
-featparams
-fillprob 1e-8 1.000000e-08
-frate 100 100
-fsg
-fsgctl
-fsgdir
-fsgext
-fsgusealtpron yes yes
-fsgusefiller yes yes
-fwdflat yes yes
-fwdflatbeam 1e-64 1.000000e-64
-fwdflatefwid 4 4
-fwdflatlw 8.5 8.500000e+00
-fwdflatsfwin 25 25
-fwdflatwbeam 7e-29 7.000000e-29
-fwdtree yes yes
-hmm /home/pi/an4/model_parameters/an4.cd_cont_200
-hyp /home/pi/an4/result/an4-1-1.match
-hypseg
-input_endian little little
-jsgf
-kdmaxbbi -1 -1
-kdmaxdepth 0 0
-kdtree
-latsize 5000 5000
-lda
-ldadim 0 0
-lextreedump 0 0
-lifter 0 0
-lm /home/pi/an4/etc/an4.lm.DMP
-lmctl
-lmname default default
-lmnamectl
-logbase 1.0001 1.000100e+00
-logfn
-logspec no no
-lowerf 133.33334 1.333333e+02
-lpbeam 1e-40 1.000000e-40
-lponlybeam 7e-29 7.000000e-29
-lw 6.5 1.000000e+01
-maxhmmpf -1 -1
-maxnewoov 20 20
-maxwpf -1 -1
-mdef
-mean
-mfclogdir
-min_endfr 0 0
-mixw
-mixwfloor 0.0000001 1.000000e-07
-mllr
-mllrctl
-mllrdir
-mllrext
-mmap yes yes
-nbest 0 0
-nbestdir
-nbestext .hyp .hyp
-ncep 13 13
-nfft 512 512
-nfilt 40 40
-nwpen 1.0 1.000000e+00
-outlatbeam 1e-5 1.000000e-05
-outlatdir
-outlatext .lat .lat
-outlatfmt s3 s3
-pbeam 1e-48 1.000000e-48
-pip 1.0 1.000000e+00
-pl_beam 1e-10 1.000000e-10
-pl_pbeam 1e-5 1.000000e-05
-pl_window 0 0
-rawlogdir
-remove_dc no no
-round_filters yes yes
-samprate 16000 1.600000e+04
-seed -1 -1
-sendump
-senin no no
-senlogdir
-senmgau
-silprob 0.005 5.000000e-03
-smoothspec no no
-svspec
-tmat
-tmatfloor 0.0001 1.000000e-04
-topn 4 4
-topn_beam 0 0
-toprule
-transform legacy legacy
-unit_area yes yes
-upperf 6855.4976 6.855498e+03
-usewdphones no no
-uw 1.0 1.000000e+00
-var
-varfloor 0.0001 1.000000e-04
-varnorm no no
-verbose no no
-warp_params
-warp_type inverse_linear inverse_linear
-wbeam 7e-29 1.000000e-40
-wip 0.65 2.000000e-01
-wlen 0.025625 2.562500e-02
INFO: feat.c(713): Initializing feature stream to type: '1s_c_d_dd', ceplen=13, CMN='current', VARNORM='no', AGC='none'
INFO: cmn.c(142): mean[0]= 12.00, mean[1..12]= 0.0
ERROR: "acmod.c", line 87: Folder '/home/pi/an4/model_parameters/an4.cd_cont_200' does not contain acoustic model definition 'mdef'
FATAL_ERROR: "batch.c", line 819: PocketSphinx decoder init failed
Thu Apr 5 02:55:50 2018
Use 5prealpha.
i 'm using jasper, it's not support 5prealpha.