MODULE: 00 verify training files
O.S. is case sensitive ("A" != "a").
Phones will be treated as case sensitive.
Phase 1: DICT - Checking to see if the dict and filler dict agrees with the
phonelist file.
Found 8 words using 16 phones
Phase 2: DICT - Checking to make sure there are not duplicate entries in the
dictionary
Phase 3: CTL - Check general format; utterance length (must be positive);
files exist
Phase 4: CTL - Checking number of lines in the transcript should match lines
in control file
Phase 5: CTL - Determine amount of training data, see if n_tied_states seems
reasonable.
Estimated Total Hours Training: 0.00451944444444444
This is a small amount of data, no comment at this time
Phase 6: TRANSCRIPT - Checking that all the words in the transcript are in the
dictionary
Words in dictionary: 5
Words in filler dictionary: 3
Phase 7: TRANSCRIPT - Checking that all the phones in the transcript are in
the phonelist, and all phones in the phonelist appear at least once
MODULE: 01 Train LDA transformation
Skipped (set $CFG_LDA_MLLT = 'yes' to enable)
MODULE: 02 Train MLLT transformation
Skipped (set $CFG_LDA_MLLT = 'yes' to enable)
MODULE: 05 Vector Quantization
Skipped for continuous models
MODULE: 10 Training Context Independent models for forced alignment and VTLN
Skipped: $ST::CFG_FORCEDALIGN set to 'no' in sphinx_train.cfg
Skipped: $ST::CFG_VTLN set to 'no' in sphinx_train.cfg
MODULE: 11 Force-aligning transcripts
Skipped: $ST::CFG_FORCEDALIGN set to 'no' in sphinx_train.cfg
MODULE: 12 Force-aligning data for VTLN
Skipped: $ST::CFG_VTLN set to 'no' in sphinx_train.cfg
MODULE: 20 Training Context Independent models
Phase 1: Cleaning up directories:
accumulator...logs...qmanager...models...
Phase 2: Flat initialize
Phase 3: Forward-Backward
Baum welch starting for 1 Gaussian(s), iteration: 1 (1 of 1)
Waiting for /root/Desktop/jolyxie/model_parameters/my_db.ci_cont_flatinitial/m
ixture_weights
Waiting for /root/Desktop/jolyxie/model_parameters/my_db.ci_cont_flatinitial/m
ixture_weights
Waiting for /root/Desktop/jolyxie/model_parameters/my_db.ci_cont_flatinitial/m
ixture_weights
Only 0 parts of 1 of Baum Welch were successfully completed
Parts 1 failed to run!
Training failed in iteration 1
Something failed: (/root/Desktop/jolyxie/scripts_pl/20.ci_hmm/slave_convg.pl)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
whether the sphinxtrain was not installed properly???
can you tell me how to install???
at the beginning ,i download the "sphinxtrain-1.0.7" ..and then use command
./configure and then make
is there anything wrong?
because the general tools are installed in this way!!!!!
thank you ~~
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
hello .
while i am running the command "./scripts_pl/RunAll.pl"
but the file "mixture_weights" is not exist ,,,why ? please help me~~~
b7f8a000-b7f8c000 rw-p b7f8a000 00:00 0
bfea5000-bfeba000 rw-p bfea5000 00:00 0
./scripts_pl/RunAll.pl
MODULE: 00 verify training files
O.S. is case sensitive ("A" != "a").
Phones will be treated as case sensitive.
Phase 1: DICT - Checking to see if the dict and filler dict agrees with the
phonelist file.
Found 8 words using 16 phones
Phase 2: DICT - Checking to make sure there are not duplicate entries in the
dictionary
Phase 3: CTL - Check general format; utterance length (must be positive);
files exist
Phase 4: CTL - Checking number of lines in the transcript should match lines
in control file
Phase 5: CTL - Determine amount of training data, see if n_tied_states seems
reasonable.
Estimated Total Hours Training: 0.00451944444444444
This is a small amount of data, no comment at this time
Phase 6: TRANSCRIPT - Checking that all the words in the transcript are in the
dictionary
Words in dictionary: 5
Words in filler dictionary: 3
Phase 7: TRANSCRIPT - Checking that all the phones in the transcript are in
the phonelist, and all phones in the phonelist appear at least once
MODULE: 01 Train LDA transformation
Skipped (set $CFG_LDA_MLLT = 'yes' to enable)
MODULE: 02 Train MLLT transformation
Skipped (set $CFG_LDA_MLLT = 'yes' to enable)
MODULE: 05 Vector Quantization
Skipped for continuous models
MODULE: 10 Training Context Independent models for forced alignment and VTLN
Skipped: $ST::CFG_FORCEDALIGN set to 'no' in sphinx_train.cfg
Skipped: $ST::CFG_VTLN set to 'no' in sphinx_train.cfg
MODULE: 11 Force-aligning transcripts
Skipped: $ST::CFG_FORCEDALIGN set to 'no' in sphinx_train.cfg
MODULE: 12 Force-aligning data for VTLN
Skipped: $ST::CFG_VTLN set to 'no' in sphinx_train.cfg
MODULE: 20 Training Context Independent models
Phase 1: Cleaning up directories:
accumulator...logs...qmanager...models...
Phase 2: Flat initialize
Phase 3: Forward-Backward
Baum welch starting for 1 Gaussian(s), iteration: 1 (1 of 1)
Waiting for /root/Desktop/jolyxie/model_parameters/my_db.ci_cont_flatinitial/m
ixture_weights
Waiting for /root/Desktop/jolyxie/model_parameters/my_db.ci_cont_flatinitial/m
ixture_weights
Waiting for /root/Desktop/jolyxie/model_parameters/my_db.ci_cont_flatinitial/m
ixture_weights
Only 0 parts of 1 of Baum Welch were successfully completed
Parts 1 failed to run!
Training failed in iteration 1
Something failed: (/root/Desktop/jolyxie/scripts_pl/20.ci_hmm/slave_convg.pl)
whether the sphinxtrain was not installed properly???
can you tell me how to install???
at the beginning ,i download the "sphinxtrain-1.0.7" ..and then use command
./configure and then make
is there anything wrong?
because the general tools are installed in this way!!!!!
thank you ~~
are you Chinese？I think the answer is yes.
这个问题应该是你的录音文件有问题。确保是16兆赫兹单声道，录音时间要超过5秒，检测文件是不是被破坏。我的情况是录音文件被破坏，只有10多k大小的数据。重新录
入后ok
and you can send E-mail (lsl713@live.cn) to me for communication. or my QQ
number (361801580) .Just you know why!