Can someone direct me to a step by step training of acoustic models in windows?
The offered tutorials online for training the acoustic model in windows is so vagued. Even the README file inside the package of sphinxtrain and sphinxbase vagued.
CAN SOMEONE JUST PLEASE ELABORATE TO ME WHAT I NEED TO DO. I have already spent a week trying to train my acoustic model.
Last edit: Leimiaoren 2015-11-09
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
You don't understand, you are a programmer your whole life. Its so easy for you to understand those but I am not a programmer. I have already read that a hundred times and that tutorial is for LINUX. The windows part is always vagued. It says run this and that but it does not specify where do I have to run those lines.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Also please note the following in the beginning of the tutorial
When you don't need to train
You need to improve accuracy - do acoustic model adaptation instead
You don't have enough data - do acoustic model adaptation instead
You don't have enough time
You don't have enough experience
This might be applicable to your case
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I have been asking in different threads and still can't find the answer to these questions. First, I really need to train my acoustic model for I am not going to work for the English Language. Its a dialect from a small part of the Philippines.
Second, I already downloaded SphinxBase and SphinxTrain. I checked the inside and I don't know what file to run. It was not mentioned in the link you have given me. I was assuming that the first step after all was just to run the following commands
You need to download prebuild sphinxtrain package for windows and put it in sphinxtrain folder together with an4 (not SphinxTrain). If you actually read the line you are trying to run and compare it with the actual layout of your filesystem you can easily figure out what is wrong.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi Sir Nickolay. So I redownloaded sphinxtrain and tried to run the commands again. This was the message. but i thought
"This will copy all the required configuration files into etc subfolder of your database folder and prepare database for training, the structure after setup will be:"
Hi Nickolay....firstly you are doing fantastic work by helping others like me.
I am doing the acoustic model training on Windows and after running the command "sphinxtrain -t an4 setup", I am only seeting "feat.params" and "sphinx_train.cfg" getting created. Just wanted to check if I am doing anything wrong ?
since Not able to see other files /folders e.g. "model_parameters ", "model_architecture ", html or log . please suggest
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Can someone direct me to a step by step training of acoustic models in windows?
The offered tutorials online for training the acoustic model in windows is so vagued. Even the README file inside the package of sphinxtrain and sphinxbase vagued.
CAN SOMEONE JUST PLEASE ELABORATE TO ME WHAT I NEED TO DO. I have already spent a week trying to train my acoustic model.
Last edit: Leimiaoren 2015-11-09
Follow the tutorial here
http://cmusphinx.sourceforge.net/wiki/tutorialam
You don't understand, you are a programmer your whole life. Its so easy for you to understand those but I am not a programmer. I have already read that a hundred times and that tutorial is for LINUX. The windows part is always vagued. It says run this and that but it does not specify where do I have to run those lines.
It did not even mentioned that it has to compile the sphinxtrain in visual studios.
You do not have to be a programmer, just need to read the tutorial and follow the instructions.
The tutorial says:
which describes location to run precisely
You do not need to compile sphinxtrain, there are already prebuilt binaries in downloads.
If you have any other specific question you are welcome to ask.
Also please note the following in the beginning of the tutorial
This might be applicable to your case
I have been asking in different threads and still can't find the answer to these questions. First, I really need to train my acoustic model for I am not going to work for the English Language. Its a dialect from a small part of the Philippines.
Second, I already downloaded SphinxBase and SphinxTrain. I checked the inside and I don't know what file to run. It was not mentioned in the link you have given me. I was assuming that the first step after all was just to run the following commands
"python ../sphinxtrain/scripts/sphinxtrain -t an4 setup"
This is what it says in my CMD
You need to download prebuild sphinxtrain package for windows and put it in sphinxtrain folder together with an4 (not SphinxTrain). If you actually read the line you are trying to run and compare it with the actual layout of your filesystem you can easily figure out what is wrong.
Hi, prebuild sphinxtrain package. Do you mean from this?
"sphinxtrain-5prealpha-win32.zip"
I placed my database folder "an4" inside sphinxtrain. And thats the message now in my cmd
Hi Sir Nickolay. So I redownloaded sphinxtrain and tried to run the commands again. This was the message. but i thought
"This will copy all the required configuration files into etc subfolder of your database folder and prepare database for training, the structure after setup will be:"
Your file structure is wrong, an4 and sphinxtrain must be inside single folder as pointed in tutorial, not one inside another.
Hi Nickolay....firstly you are doing fantastic work by helping others like me.
I am doing the acoustic model training on Windows and after running the command "sphinxtrain -t an4 setup", I am only seeting "feat.params" and "sphinx_train.cfg" getting created. Just wanted to check if I am doing anything wrong ?
since Not able to see other files /folders e.g. "model_parameters ", "model_architecture ", html or log . please suggest
hello.. i want to ask something.. on windows.. cmake is not available..what should i do? when i downloaded it its not working.its the same