I need help.
after I run command for start training
sphinxtrain run
and below is result
Sphinxtrain binaries path: /usr/local/libexec/sphinxtrain
Running the training
MODULE: 000 Computing feature from audio files
Extracting features from segments starting at (part 1 of 1)
Extracting features from segments starting at (part 1 of 1)
Feature extraction is done
MODULE: 00 verify training files
Phase 1: Checking to see if the dict and filler dict agrees with the phonelist file.
Found 293457 words using 75 phones
Phase 2: Checking to make sure there are not duplicate entries in the dictionary
Phase 3: Check general format for the fileids file; utterance length (must be positive); files exist
Phase 4: Checking number of lines in the transcript file should match lines in fileids file
Phase 5: Determine amount of training data, see if n_tied_states seems reasonable.
Estimated Total Hours Training: 50.9146694444444
Rule of thumb suggests 3000, however there is no correct answer
Phase 6: Checking that all the words in the transcript are in the dictionary
Words in dictionary: 293454
Words in filler dictionary: 3
Phase 7: Checking that all the phones in the transcript are in the phonelist, and all phones in the phonelist appear at least once
MODULE: 0000 train grapheme-to-phoneme model
Skipped (set $CFG_G2P_MODEL = 'yes' to enable)
MODULE: 01 Train LDA transformation
Skipped (set $CFG_LDA_MLLT = 'yes' to enable)
MODULE: 02 Train MLLT transformation
Skipped (set $CFG_LDA_MLLT = 'yes' to enable)
MODULE: 05 Vector Quantization
Skipped for continuous models
MODULE: 10 Training Context Independent models for forced alignment and VTLN
Skipped: $ST::CFG_FORCEDALIGN set to 'no' in sphinx_train.cfg
Skipped: $ST::CFG_VTLN set to 'no' in sphinx_train.cfg
MODULE: 11 Force-aligning transcripts
Skipped: $ST::CFG_FORCEDALIGN set to 'no' in sphinx_train.cfg
MODULE: 12 Force-aligning data for VTLN
Skipped: $ST::CFG_VTLN set to 'no' in sphinx_train.cfg
MODULE: 20 Training Context Independent models
Phase 1: Cleaning up directories:
accumulator...logs...qmanager...models...
Phase 2: Flat initialize
Phase 3: Forward-Backward
Baum welch starting for 1 Gaussian(s), iteration: 1 (1 of 1)
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
ERROR: This step had 45264 ERROR messages and 0 WARNING messages. Please check the log file for details.
ERROR: Training failed in iteration 1
ERROR in /logdir/20.ci_hmm/model_Lotus.1.1-1.bw.log
I need help.
after I run command for start training
and below is result
Sphinxtrain binaries path: /usr/local/libexec/sphinxtrain Running the training MODULE: 000 Computing feature from audio files Extracting features from segments starting at (part 1 of 1) Extracting features from segments starting at (part 1 of 1) Feature extraction is done MODULE: 00 verify training files Phase 1: Checking to see if the dict and filler dict agrees with the phonelist file. Found 293457 words using 75 phones Phase 2: Checking to make sure there are not duplicate entries in the dictionary Phase 3: Check general format for the fileids file; utterance length (must be positive); files exist Phase 4: Checking number of lines in the transcript file should match lines in fileids file Phase 5: Determine amount of training data, see if n_tied_states seems reasonable. Estimated Total Hours Training: 50.9146694444444 Rule of thumb suggests 3000, however there is no correct answer Phase 6: Checking that all the words in the transcript are in the dictionary Words in dictionary: 293454 Words in filler dictionary: 3 Phase 7: Checking that all the phones in the transcript are in the phonelist, and all phones in the phonelist appear at least once MODULE: 0000 train grapheme-to-phoneme model Skipped (set $CFG_G2P_MODEL = 'yes' to enable) MODULE: 01 Train LDA transformation Skipped (set $CFG_LDA_MLLT = 'yes' to enable) MODULE: 02 Train MLLT transformation Skipped (set $CFG_LDA_MLLT = 'yes' to enable) MODULE: 05 Vector Quantization Skipped for continuous models MODULE: 10 Training Context Independent models for forced alignment and VTLN Skipped: $ST::CFG_FORCEDALIGN set to 'no' in sphinx_train.cfg Skipped: $ST::CFG_VTLN set to 'no' in sphinx_train.cfg MODULE: 11 Force-aligning transcripts Skipped: $ST::CFG_FORCEDALIGN set to 'no' in sphinx_train.cfg MODULE: 12 Force-aligning data for VTLN Skipped: $ST::CFG_VTLN set to 'no' in sphinx_train.cfg MODULE: 20 Training Context Independent models Phase 1: Cleaning up directories: accumulator...logs...qmanager...models... Phase 2: Flat initialize Phase 3: Forward-Backward Baum welch starting for 1 Gaussian(s), iteration: 1 (1 of 1) 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% ERROR: This step had 45264 ERROR messages and 0 WARNING messages. Please check the log file for details. ERROR: Training failed in iteration 1Last edit: Enigma 2019-07-03
Input audio files have wrong format. It should be 16khz 16bit pcm data.
It was input audio files correct format.
You compiled sphinxbase with fixed point, you need to recomiple without enable-fixed.
It works. Thanks a lot.
If I want run script without step 000.comp_feat to 50.cd_hmm_tied
Where can I fix it?