Clonezilla vs IBM system x RAID

[Grunts]

Hello everyone!

I'm trying to master an IBM x3100 M5 with ServeRaid M-100 configured with 2 HDD in RAID 1 to deploy on other Server (not necessary IBM)

I use to prepare with SySPrep then I use Clonezilla to take the image of a HDD.

But on that IBM, Clonezilla purpose 3 HDD (instead of 2):
Gparted information are:
Partition ; File System; Label ;Size ; Flags
/dev/md126p1 ; Fat32 ; ; 200MB ; boot, esp
/dev/md126p2; Unknown ; Microsft reserved partition; 128MB ; msftres
/dev/md126p3; NTFS ; ;93000MB ; msftdata
/dev/sda1 ; Fat32 ; ; 200MB ; boot, esp
/dev/sda2 ; Unknown ; ; 128MB ; msftres
/dev/sda3 ; NTFS ; ; 93000MB ; msftdata
/dev/sdb1 ; Fat32 ; ; 200MB ; boot, esp
/dev/sdb2 ; Unknown ; ; 128MB ; msftres
/dev/sdb3 ; NTFS ; ; 93000MB ; msftdata

I suppose that md126p is the RAID1 image created by ServeRaid M-100.
So I took the md126p image. No problem told by Clonezilla.
But when I restarted the IBM Server, Windows did not lauch.
I restart Clonezilla to restor the image. But now Clonezilla pupose 2 HDD, sda and sdb (miss md126p)
I restored image on Sda and Sdb.
The IBM won't launch Windows.

Someone have an idea to make again the RAID 1 array without data destruction to make the IBM server launch with the HDD restored?

Thanks.

[Steven Shiau]

RAID is not well support in Clonezilla live. However, for RAID 1, there is a workaround:
http://drbl.org/faq/fine-print.php?path=./2_System/95_workaround_for_RAID_1.faq#95_workaround_for_RAID_1.faq

Steven.