cciss and multiple disks...
A partition and disk imaging/cloning program
Brought to you by:
steven_shiau
Menu
▾
▴
Hi,
First, thanks for a really good piece of software.
I have a little problem. We got a Proliant DL350 server with 4 disks (RAID 1) and 2 logical volumes. When I try to use Clonezilla Live, the first disk is not cloned.
Best regards,
Francisco
PD. If you need to translate your software to spanish, please tell me.
Below some information:
clonezilla-live-1.0.7-18
Dmesg:
03] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec10000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80000] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80000, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec80100] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec80100, GSI 72-95
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 4 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
Built 1 zonelists. Total pages: 227584
Kernel command line: initrd=initrd.gz boot=casper vga=788 ip=frommedia BOOT_IMAGE=vmlinuz
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec10000)
mapped IOAPIC to ffffa000 (fec80000)
mapped IOAPIC to ffff9000 (fec80100)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3200.357 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 901296k/917504k available (1658k kernel code, 15672k reserved, 648k data, 316k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
vmalloc : 0xf8800000 - 0xfffb3000 ( 119 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0344000 - 0xc0393000 ( 316 kB)
.data : 0xc029eb3b - 0xc0340cc4 ( 648 kB)
.text : 0xc0100000 - 0xc029eb3b (1658 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6405.20 BogoMIPS (lpj=12810400)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000641d 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support.
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0900-097f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0800-083f claimed by ICH4 GPIO
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11) *3
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *4
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 4 of device 0000:00:1d.0
PCI: Cannot allocate resource region 4 of device 0000:00:1d.1
NET: Registered protocol family 8
NET: Registered protocol family 20
pnp: 00:01: ioport range 0x408-0x40f has been reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:05:00.0
IO window: 4000-4fff
MEM window: fdf00000-fdffffff
PREFETCH window: f0000000-f00fffff
PCI: Bridge: 0000:05:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: 4000-4fff
MEM window: fdf00000-fdffffff
PREFETCH window: f0000000-f00fffff
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-3fff
MEM window: fbf00000-fdefffff
PREFETCH window: f0100000-f01fffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:05:00.0 to 64
PCI: Setting latency timer of device 0000:05:00.2 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4811k freed
audit: initializing netlink socket (disabled)
audit(1204620848.152:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
PCI: Setting latency timer of device 0000:00:04.0 to 64
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
PCI: Setting latency timer of device 0000:00:06.0 to 64
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:02.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:04.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:06.0:pcie01 failed with error 2
vesafb: framebuffer at 0xfc000000, mapped to 0xf8880000, using 1875k, total 8128k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at c000:4a66
vesafb: pmi: set display start = c00c4acc, set palette = c00c4b26
vesafb: pmi: ports = 3085 301f 30b4 30b8 3018 3014 30c0 30c3 30c1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Unable to assign resources to device 00:08.
serial: probe of 00:08 failed with error -16
pnp: Unable to assign resources to device 00:09.
serial: probe of 00:09 failed with error -16
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
EISA: Mainboard CPQ074C detected.
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 316k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Thermal Zone [THM0] (8 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
HP CISS Driver (v 3.6.14)
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005020
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfbee0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: Unable to derive IRQ for device 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
usb 3-3: new high speed USB device using ehci_hcd and address 2
usb 3-3: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Probing IDE interface ide1...
hdd: SAMSUNG CD-ROM SC-148A, ATAPI CD/DVD-ROM drive
hdd: selected mode 0x41
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 48 (level, low) -> IRQ 19
hdd: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(25)
Uniform CD-ROM driver Revision: 3.20
cciss0: <0x46> at PCI 0000:06:01.0 IRQ 19 using DAC
blocks= 71122560 block_size= 512
heads=255, sectors=32, cylinders=8716
blocks= 142253280 block_size= 512
heads=255, sectors=32, cylinders=17433
blocks= 71122560 block_size= 512
heads=255, sectors=32, cylinders=8716
cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 p8 >
blocks= 142253280 block_size= 512
heads=255, sectors=32, cylinders=17433
cciss/c0d1: p1
tg3.c:v3.77 (May 31, 2007)
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 20
eth0: Tigon3 [partno(349322-001) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:85:fe:f6:f5
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Registering unionfs 1.4
unionfs: debugging is not enabled
loop: module loaded
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
usb-storage: device scan complete
scsi 0:0:0:0: Direct-Access ExcelSto r Technology J81 PQ: 0 ANSI: 0
sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
Floppy drive(s): fd0 is 1.44M
input: PC Speaker as /class/input/input1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
EDAC MC: Ver: 2.0.1 Oct 31 2007
intel_rng: FWH not detected
pnp: Device 00:07 activated.
parport_pc 00:07: reported by Plug and Play ACPI
pnp: Device 00:07 disabled.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
floppy0: no floppy controllers found
Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden
e752x_edac: probe of 0000:00:00.0 failed with error -12
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
fuse init (API version 7.8)
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
JFS: nTxBlock = 7082, nTxLock = 56660
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
cat /proc/partitions:
major minor #blocks name
104 0 35561280 cciss/c0d0
104 1 106064 cciss/c0d0p1
104 2 12586800 cciss/c0d0p2
104 3 5246880 cciss/c0d0p3
104 4 1 cciss/c0d0p4
104 5 2101184 cciss/c0d0p5
104 6 2101184 cciss/c0d0p6
104 7 3149744 cciss/c0d0p7
104 8 10269344 cciss/c0d0p8
104 16 71126640 cciss/c0d1
104 17 71126624 cciss/c0d1p1
7 0 77244 loop0
8 0 160836480 sda
8 1 160834716 sda1
disk file contents: sdb sdc
ls results:
As you can see, there is only one disk, sdc not sdb, in the disk files are sdb and sdc.
fgonzalez@fgonzalez:/media/disk/oralin3a-sles10sp1-snapshot1.1.img$ ls
disk parts sdc1.aa sdc1.ab sdc-chs.sf sdc-mbr sdc-pt.sf
clonezilla-live-1.0.7-18 should work for cciss, although it is reported that it's broken in 1.0.9-10. We are working on fixing the bug in 1.0.9-10. The problem is, no cciss card here, so it takes time to fix that.
I'm having a similar issue, though I'm not using cciss. With the current version of Clonezilla Live 1.0.9), if I tell it to save both disks (sda and sdb), it only saves sdb. If I tell it save just sda, it will. I've tried various different options, but it doesn't want to save them together.
An older version of Clonezilla (not sure which number, but it wasn't that old) saves the image with no issues.
This bug was fixed in Cloneizlla live version 1.0.10-6:
http://clonezilla.sourceforge.net/download/sourceforge/
If possible, could you please test it and tell us your results.
Thanks in advance.
Hi,
Could you boot clonezilla live 1.0.9-18
http://opensource.nchc.org.tw/clonezilla-live/testing/clonezilla-live-1.0.9-18.iso
and try it again ?
If it fails, please run this in the command line:
1. sudo su -
2. /opt/drbl/sbin/create-cciss-mapping
3. ls -alF /dev/sd*
Then post the results of 2 and 3.
Thanks.
Sorry for the delay... and thanks for your time, the results are:
The command create-cciss-mapping
No output file! Exit
The ls -alF /dev/sd* command
brw-rw---- 1 root floppy 8, 0 2008-03-26 20:08 /dev/sda
brw-rw---- 1 root floppy 8, 1 2008-03-26 20:08 /dev/sda1
lrwxrwxrwx 1 root root 15 2008-03-26 20:23 /dev/sdb -> /dev/cciss/c0d0
lrwxrwxrwx 1 root root 17 2008-03-26 20:23 /dev/sdb1 -> /dev/cciss/c0d0p1
lrwxrwxrwx 1 root root 17 2008-03-26 20:23 /dev/sdb2 -> /dev/cciss/c0d0p2
lrwxrwxrwx 1 root root 17 2008-03-26 20:23 /dev/sdb3 -> /dev/cciss/c0d0p3
lrwxrwxrwx 1 root root 17 2008-03-26 20:23 /dev/sdb4 -> /dev/cciss/c0d0p4
lrwxrwxrwx 1 root root 17 2008-03-26 20:23 /dev/sdb5 -> /dev/cciss/c0d0p5
lrwxrwxrwx 1 root root 17 2008-03-26 20:23 /dev/sdb6 -> /dev/cciss/c0d0p6
lrwxrwxrwx 1 root root 17 2008-03-26 20:23 /dev/sdb7 -> /dev/cciss/c0d0p7
lrwxrwxrwx 1 root root 17 2008-03-26 20:23 /dev/sdb8 -> /dev/cciss/c0d0p8
lrwxrwxrwx 1 root root 15 2008-03-26 20:23 /dev/sdc -> /dev/cciss/c0d1
lrwxrwxrwx 1 root root 17 2008-03-26 20:23 /dev/sdc1 -> /dev/cciss/c0d1p1
And again I don't know if it you will find useful ...
dmesg
0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec10000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80000] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80000, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec80100] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec80100, GSI 72-95
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 4 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
Built 1 zonelists. Total pages: 227584
Kernel command line: initrd=/casper/initrd1.img boot=casper username=casper hostname=debian vga=788 ip=frommedia BOOT_IMAGE=/casper/vmlinuz1
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec10000)
mapped IOAPIC to ffffa000 (fec80000)
mapped IOAPIC to ffff9000 (fec80100)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3200.328 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 900656k/917504k available (1659k kernel code, 16264k reserved, 647k data, 316k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
vmalloc : 0xf8800000 - 0xfffb3000 ( 119 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0344000 - 0xc0393000 ( 316 kB)
.data : 0xc029ecdb - 0xc0340cc4 ( 647 kB)
.text : 0xc0100000 - 0xc029ecdb (1659 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6405.22 BogoMIPS (lpj=12810452)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000641d 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support.
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0900-097f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0800-083f claimed by ICH4 GPIO
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11) *3
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *4
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 4 of device 0000:00:1d.0
PCI: Cannot allocate resource region 4 of device 0000:00:1d.1
NET: Registered protocol family 8
NET: Registered protocol family 20
pnp: 00:01: ioport range 0x408-0x40f has been reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:05:00.0
IO window: 4000-4fff
MEM window: fdf00000-fdffffff
PREFETCH window: f0000000-f00fffff
PCI: Bridge: 0000:05:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: 4000-4fff
MEM window: fdf00000-fdffffff
PREFETCH window: f0000000-f00fffff
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-3fff
MEM window: fbf00000-fdefffff
PREFETCH window: f0100000-f01fffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:05:00.0 to 64
PCI: Setting latency timer of device 0000:05:00.2 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5401k freed
audit: initializing netlink socket (disabled)
audit(1206562091.156:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
PCI: Setting latency timer of device 0000:00:04.0 to 64
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
PCI: Setting latency timer of device 0000:00:06.0 to 64
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:02.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:04.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:06.0:pcie01 failed with error 2
vesafb: framebuffer at 0xfc000000, mapped to 0xf8880000, using 1875k, total 8128k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at c000:4a66
vesafb: pmi: set display start = c00c4acc, set palette = c00c4b26
vesafb: pmi: ports = 3085 301f 30b4 30b8 3018 3014 30c0 30c3 30c1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Unable to assign resources to device 00:08.
serial: probe of 00:08 failed with error -16
pnp: Unable to assign resources to device 00:09.
serial: probe of 00:09 failed with error -16
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
EISA: Mainboard CPQ074C detected.
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 316k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Thermal Zone [THM0] (8 C)
SCSI subsystem initialized
HP CISS Driver (v 3.6.14)
ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 48 (level, low) -> IRQ 17
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
cciss0: <0x46> at PCI 0000:06:01.0 IRQ 17 using DAC
blocks= 71122560 block_size= 512
heads=255, sectors=32, cylinders=8716
libata version 2.21 loaded.
blocks= 142253280 block_size= 512
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00005020
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
heads=255, sectors=32, cylinders=17433
blocks= 71122560 block_size= 512
heads=255, sectors=32, cylinders=8716
cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 p8 >
blocks= 142253280 block_size= 512
heads=255, sectors=32, cylinders=17433
cciss/c0d1: p1
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfbee0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
tg3.c:v3.77 (May 31, 2007)
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 20
eth0: Tigon3 [partno(349322-001) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:11:85:fe:f6:f5
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: Unable to derive IRQ for device 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
usb 3-3: new high speed USB device using ehci_hcd and address 2
usb 3-3: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Probing IDE interface ide1...
hdd: SAMSUNG CD-ROM SC-148A, ATAPI CD/DVD-ROM drive
hdd: selected mode 0x41
ide1 at 0x170-0x177,0x376 on irq 15
hdd: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(25)
Uniform CD-ROM driver Revision: 3.20
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Registering unionfs 1.4
unionfs: debugging is not enabled
loop: module loaded
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
usb-storage: device scan complete
scsi 0:0:0:0: Direct-Access ExcelSto r Technology J81 PQ: 0 ANSI: 0
sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
Floppy drive(s): fd0 is 1.44M
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
EDAC MC: Ver: 2.0.1 Feb 12 2008
intel_rng: FWH not detected
input: PC Speaker as /class/input/input1
pnp: Device 00:07 activated.
parport_pc 00:07: reported by Plug and Play ACPI
pnp: Device 00:07 disabled.
Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden
e752x_edac: probe of 0000:00:00.0 failed with error -12
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
floppy0: no floppy controllers found
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
fuse init (API version 7.8)
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
JFS: nTxBlock = 7082, nTxLock = 56660
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
cat /proc/partitions
major minor #blocks name
104 0 35561280 cciss/c0d0
104 1 106064 cciss/c0d0p1
104 2 12586800 cciss/c0d0p2
104 3 5246880 cciss/c0d0p3
104 4 1 cciss/c0d0p4
104 5 2101184 cciss/c0d0p5
104 6 2101184 cciss/c0d0p6
104 7 3149744 cciss/c0d0p7
104 8 10269344 cciss/c0d0p8
104 16 71126640 cciss/c0d1
104 17 71126624 cciss/c0d1p1
7 0 76532 loop0
8 0 160836480 sda
8 1 160834716 sda1
Content of the file "disk"
sdb sdc
and, finally a ls command of the image directory:
disk
ls.txt
parts
sdc1.aa
sdc1.ab
sdc1.ac
sdc1.ad
sdc-chs.sf
sdc-mbr
sdc-pt.parted
sdc-pt.sf
Francisco,
Which version of clonezilla live are you using ? Did you try Clonezilla live 1.0.10-6 (http://free.nchc.org.tw/clonezilla-live/testing/clonezilla-live-1.0.10-6.iso) ?
Steven,
I try with the 1.0.8.18.
I will try with the version 1.0.10-6 tonight, do you want to run tests with it? any special indications? or I should repeat your instructions in the post 2008-03-06 02:55.
Francisco
Francisco,
Yes, please test clonezilla live 1.0.10-6 with your machines. Do a normal backup for 2 disks and restore the image if you can.
Please let us know your results.
Thanks.
Steven.
Steven,
I have tried with the 1.0.10-6, the behaviour was the same. It did the clone of the sdc disk and it's partitions, but ignore all the sdb partitions.
What's the next move?.
Francisco
I did a test here (without cciss, only multiple disks), and it works here.
Is there any cciss device in your multiple disks system ?
BTW, how about 1.0.10-7 ?