Mike B - 2014-05-23

I'm working with an ASUS T100TA-C1-GR, which comes with a keyboard dock and single USB 3.0 slot. I have successfully cloned/restored the previous model (T100TA-C1-EDU) without much issue. I did have to add the bootia32.efi file to the /EFI/boot/ folder. I used a 32GB USB 3.0 drive (2.0 is SLOWWWW) with rufus 1.4.7 to create the live USB. I then used gparted to shrink the partition to about 350MB and added a second ext4 partition for the /home/partimag folder. Worded great.

Both of these models - and I suspect that all models with eventually be - uEFI only! No CSM!

So, this new model is killing me with errors that seem to break the boot process. I can't get to an ocs-sr menu. I've tried everything to which my research has led me (2 weeks) and am still stumped. I believe the problem has to do with the SD Card Reader Slot, but am not sure. I've tried to blacklist modules but none have worked.

I've tried all flavors of CZLive (current and previous versions)

The following is dmesg:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/xubuntu.seed boot=casper nosplash text moacpi nomodeset --
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000078d0efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078d0f000-0x0000000078d3efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078d3f000-0x0000000078d6dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000078d6e000-0x0000000079358fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079359000-0x0000000079b76fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079b77000-0x0000000079bc7fff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000079bc8000-0x0000000079d40fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079d41000-0x0000000079ff8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079ff9000-0x0000000079ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x78d6d000 ACPI 2.0=0x78d6d014 SMBIOS=0x79b76390
[ 0.000000] efi: No EFI runtime due to 32/64-bit mismatch with kernel
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x00000000014ff000) (19MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x00000000014ff000-0x0000000002000000) (11MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x00000000033ff000) (19MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x00000000033ff000-0x0000000020000000) (460MB)
[ 0.000000] efi: mem08: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000020100000-0x0000000035738000) (342MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000035738000-0x0000000036b94000) (20MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000036b94000-0x0000000058762000) (539MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x0000000058762000-0x0000000076000000) (472MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000076000000-0x0000000076020000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000076020000-0x000000007605e000) (0MB)
[ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x000000007605e000-0x00000000760f6000) (0MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000760f6000-0x000000007870f000) (38MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x000000007870f000-0x0000000078b45000) (4MB)
[ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x0000000078b45000-0x0000000078b4f000) (0MB)
[ 0.000000] efi: mem19: type=3, attr=0xf, range=[0x0000000078b4f000-0x0000000078d0f000) (1MB)
[ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x0000000078d0f000-0x0000000078d3f000) (0MB)
[ 0.000000] efi: mem21: type=9, attr=0xf, range=[0x0000000078d3f000-0x0000000078d6e000) (0MB)
[ 0.000000] efi: mem22: type=10, attr=0xf, range=[0x0000000078d6e000-0x0000000079359000) (5MB)
[ 0.000000] efi: mem23: type=6, attr=0x800000000000000f, range=[0x0000000079359000-0x0000000079b77000) (8MB)
[ 0.000000] efi: mem24: type=5, attr=0x800000000000000f, range=[0x0000000079b77000-0x0000000079bc8000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000079bc8000-0x0000000079d41000) (1MB)
[ 0.000000] efi: mem26: type=10, attr=0xf, range=[0x0000000079d41000-0x0000000079ff9000) (2MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000079ff9000-0x000000007a000000) (0MB)
[ 0.000000] efi: mem28: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] efi: mem29: type=11, attr=0x8000000000000001, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[ 0.000000] efi: mem30: type=11, attr=0x8000000000000001, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.303 02/28/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 060000000 mask FF0000000 write-back
[ 0.000000] 3 base 070000000 mask FF8000000 write-back
[ 0.000000] 4 base 070000000 mask FF8000000 write-back
[ 0.000000] 5 base 078000000 mask FFC000000 write-back
[ 0.000000] 6 base 07B000000 mask FFF000000 uncachable
[ 0.000000] 7 base 07AE00000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 1536MB, range: 256MB, type WB
[ 0.000000] reg 3, base: 1792MB, range: 128MB, type WB
[ 0.000000] reg 4, base: 1792MB, range: 128MB, type WB
[ 0.000000] reg 5, base: 1920MB, range: 64MB, type WB
[ 0.000000] reg 6, base: 1968MB, range: 16MB, type UC
[ 0.000000] reg 7, base: 1966MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 1966M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 1966MB, range: 2MB, type UC
[ 0.000000] reg 2, base: 1968MB, range: 16MB, type UC
[ 0.000000] reg 3, base: 1984MB, range: 64MB, type UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02fdd000, 0x02fddfff] PGTABLE
[ 0.000000] BRK [0x02fde000, 0x02fdefff] PGTABLE
[ 0.000000] BRK [0x02fdf000, 0x02fdffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x78800000-0x789fffff]
[ 0.000000] [mem 0x78800000-0x789fffff] page 2M
[ 0.000000] BRK [0x02fe0000, 0x02fe0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x78000000-0x787fffff]
[ 0.000000] [mem 0x78000000-0x787fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20100000-0x77ffffff]
[ 0.000000] [mem 0x20100000-0x201fffff] page 4k
[ 0.000000] [mem 0x20200000-0x77ffffff] page 2M
[ 0.000000] BRK [0x02fe1000, 0x02fe1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x78a00000-0x78d0efff]
[ 0.000000] [mem 0x78a00000-0x78bfffff] page 2M
[ 0.000000] [mem 0x78c00000-0x78d0efff] page 4k
[ 0.000000] BRK [0x02fe2000, 0x02fe2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x79bc8000-0x79d40fff]
[ 0.000000] [mem 0x79bc8000-0x79d40fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x79ff9000-0x79ffffff]
[ 0.000000] [mem 0x79ff9000-0x79ffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x35738000-0x36b93fff]
[ 0.000000] ACPI: RSDP 0000000078d6d014 000024 (v02 ASUS)
[ 0.000000] ACPI: XSDT 0000000078d6c0e8 0000B4 (v01 ASUS A M I 00000003 MSFT 0100000D)
[ 0.000000] ACPI: FACP 0000000078d6a000 00010C (v05 ASUS A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: DSDT 0000000078d51000 00FCDA (v02 ASUS Notebook 00000003 AMI 0100000D)
[ 0.000000] ACPI: UEFI 0000000079302000 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: DBG2 0000000078d6b000 000072 (v00 ASUS INTLDBG2 00000003 AMI 0100000D)
[ 0.000000] ACPI: HPET 0000000078d69000 000038 (v01 ASUS A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: LPIT 0000000078d68000 000104 (v01 ASUS 00000003 AMI 0100000D)
[ 0.000000] ACPI: APIC 0000000078d67000 00006C (v03 ASUS 00000003 AMI 0100000D)
[ 0.000000] ACPI: MCFG 0000000078d66000 00003C (v01 ASUS 00000003 AMI 0100000D)
[ 0.000000] ACPI: SSDT 0000000078d65000 0005FB (v01 ASUS CpuDptf 00000003 AMI 0100000D)
[ 0.000000] ACPI: SSDT 0000000078d63000 001A07 (v01 ASUS DptfTab 00000003 AMI 0100000D)
[ 0.000000] ACPI: SSDT 0000000078d62000 000058 (v01 ASUS LowPwrM 00000003 AMI 0100000D)
[ 0.000000] ACPI: SSDT 0000000078d61000 0000FF (v01 ASUS SoCDptf 00000003 AMI 0100000D)
[ 0.000000] ACPI: FPDT 0000000078d50000 000044 (v01 A M I ALASKA 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0000000078d4f000 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0000000078d4e000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0000000078d4d000 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: BGRT 0000000078d4c000 000038 (v00 ASUS Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: CSRT 0000000078d4b000 00014C (v00 ALASKA A M I 00000005 MSFT 0100000D)
[ 0.000000] ACPI: MSDM 0000000078d3df90 000055 (v03 ASUS Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x79ffffff]
[ 0.000000] NODE_DATA [mem 0x78b47000-0x78b4bfff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880073c00000-ffff880075bfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20100000-0x78d0efff]
[ 0.000000] node 0: [mem 0x79bc8000-0x79d40fff]
[ 0.000000] node 0: [mem 0x79ff9000-0x79ffffff]
[ 0.000000] On node 0 totalpages: 494891
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7744 pages used for memmap
[ 0.000000] DMA32 zone: 490895 pages, LIFO batch:31
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 103
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78d0f000-0x78d3efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78d3f000-0x78d6dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78d6e000-0x79358fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79359000-0x79b76fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79b77000-0x79bc7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79d41000-0x79ff8fff]
[ 0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] efi: Setup done, disabling due to 32/64-bit mismatch
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880078800000 s86336 r8192 d24256 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=12097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 487061
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/xubuntu.seed boot=casper nosplash text moacpi nomodeset --
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1866372K/1979564K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 113192K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] NR_IRQS:16640 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1333.387 MHz processor
[ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2666.77 BogoMIPS (lpj=5333548)
[ 0.000021] pid_max: default: 32768 minimum: 301
[ 0.000085] Security Framework initialized
[ 0.000129] AppArmor: AppArmor initialized
[ 0.000138] Yama: becoming mindful.
[ 0.000602] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002019] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.002707] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.002731] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.003240] Initializing cgroup subsys memory
[ 0.003262] Initializing cgroup subsys devices
[ 0.003271] Initializing cgroup subsys freezer
[ 0.003279] Initializing cgroup subsys blkio
[ 0.003287] Initializing cgroup subsys perf_event
[ 0.003298] Initializing cgroup subsys hugetlb
[ 0.003347] CPU: Physical Processor ID: 0
[ 0.003355] CPU: Processor Core ID: 0
[ 0.003366] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003366] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.009409] mce: CPU supports 6 MCE banks
[ 0.009428] CPU0: Thermal monitoring enabled (TM1)
[ 0.009445] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.009445] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
[ 0.009445] tlb_flushall_shift: 6
[ 0.009660] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
[ 0.011643] ACPI: Core revision 20131115
[ 0.047208] ACPI: All ACPI Tables successfully acquired
[ 0.047228] ftrace: allocating 28408 entries in 111 pages
[ 0.071834] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.111545] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.111553] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.111560] ..... (found apic 0 pin 0) ...
[ 0.151256] ....... works.
[ 0.151262] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3740 @ 1.33GHz (fam: 06, model: 37, stepping: 03)
[ 0.151286] TSC deadline timer enabled
[ 0.154279] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.154303] ... version: 3
[ 0.154310] ... bit width: 40
[ 0.154315] ... generic registers: 2
[ 0.154321] ... value mask: 000000ffffffffff
[ 0.154327] ... max period: 000000ffffffffff
[ 0.154332] ... fixed-purpose events: 3
[ 0.154338] ... event mask: 0000000700000003
[ 0.158942] x86: Booting SMP configuration:
[ 0.178204] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.158957] .... node #0, CPUs: #1 #2 #3
[ 0.216952] x86: Booted up 1 node, 4 CPUs
[ 0.216964] smpboot: Total of 4 processors activated (10667.09 BogoMIPS)
[ 0.218505] devtmpfs: initialized
[ 0.228441] EVM: security.selinux
[ 0.228450] EVM: security.SMACK64
[ 0.228455] EVM: security.ima
[ 0.228460] EVM: security.capability
[ 0.228620] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.228631] PM: Registering ACPI NVS region [mem 0x78d6e000-0x79358fff] (6205440 bytes)
[ 0.228881] PM: Registering ACPI NVS region [mem 0x79d41000-0x79ff8fff] (2850816 bytes)
[ 0.231596] pinctrl core: initialized pinctrl subsystem
[ 0.231784] regulator-dummy: no parameters
[ 0.231839] RTC time: 3:18:30, date: 05/16/14
[ 0.231951] NET: Registered protocol family 16
[ 0.232293] cpuidle: using governor ladder
[ 0.232302] cpuidle: using governor menu
[ 0.232458] ACPI: bus type PCI registered
[ 0.232467] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.232640] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.232653] PCI: not using MMCONFIG
[ 0.232660] PCI: Using configuration type 1 for base access
[ 0.235402] bio: create slab <bio-0> at 0
[ 0.235901] ACPI: Added OSI(Module Device)
[ 0.235911] ACPI: Added _OSI(Processor Device)
[ 0.235918] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.235925] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.266839] ACPI: SSDT 0000000078d3ba90 000353 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.268701] ACPI: Dynamic OEM Table Load:
[ 0.268712] ACPI: SSDT (null) 000353 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.269043] ACPI: SSDT 0000000078d3a910 000442 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.270880] ACPI: Dynamic OEM Table Load:
[ 0.270892] ACPI: SSDT (null) 000442 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.277742] ACPI: SSDT 0000000078d3cd90 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.279644] ACPI: Dynamic OEM Table Load:
[ 0.279655] ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.281274] ACPI: SSDT 0000000078d3cf10 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.283118] ACPI: Dynamic OEM Table Load:
[ 0.283129] ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.287294] ACPI: Interpreter enabled
[ 0.287318] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S1_] (20131115/hwxface-580)
[ 0.287339] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S2_] (20131115/hwxface-580)
[ 0.287358] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S3_] (20131115/hwxface-580)
[ 0.287377] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S4_] (20131115/hwxface-580)
[ 0.287402] ACPI: (supports S0)
[ 0.287410] ACPI: Using IOAPIC for interrupt routing
[ 0.287477] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.296801] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[ 0.296814] PCI: not using MMCONFIG
[ 0.296852] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.297481] ACPI: No dock devices found.
[ 0.302530] ACPI: Power Resource [USBC] (on)
[ 0.311042] ACPI: Power Resource [PLPE] (on)
[ 0.319658] ACPI: Power Resource [CLK0] (on)
[ 0.319777] ACPI: Power Resource [CLK1] (on)
[ 0.320145] ACPI: Power Resource [P28X] (off)
[ 0.320254] ACPI: Power Resource [P18X] (off)
[ 0.321448] ACPI: Power Resource [TCPR] (off)
[ 0.324096] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.329022] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.329042] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.329190] _SB.PCI0:_OSC invalid UUID
[ 0.329196] _OSC request data:1 1e 0
[ 0.329208] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.329982] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.330554] PCI host bridge to bus 0000:00
[ 0.330567] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.330577] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.330586] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.330595] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.330605] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.330614] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.330623] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.330632] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff]
[ 0.330641] pci_bus 0000:00: root bus resource [mem 0x7b000001-0x7f000000]
[ 0.330650] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe]
[ 0.330659] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff]
[ 0.330680] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.330918] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.330943] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[ 0.330962] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.330980] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007]
[ 0.331239] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.331270] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
[ 0.331351] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.331570] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.331607] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[ 0.331627] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[ 0.331756] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.331964] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.333119] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) </bio-0>0, disabled.
[ 0.333346] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled.
[ 0.333548] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled.
[ 0.333750] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled.
[ 0.333951] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled.
[ 0.334151] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled.
[ 0.334351] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled.
[ 0.334552] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.343459] ACPI: _SB_.PCI0: notify handler is installed
[ 0.343674] Found 1 acpi root devices
[ 0.343972] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.343986] vgaarb: loaded
[ 0.343992] vgaarb: bridge control possible 0000:00:02.0
[ 0.344471] SCSI subsystem initialized
[ 0.344613] libata version 3.00 loaded.
[ 0.344669] ACPI: bus type USB registered
[ 0.344725] usbcore: registered new interface driver usbfs
[ 0.344753] usbcore: registered new interface driver hub
[ 0.344828] usbcore: registered new device driver usb
[ 0.345161] PCI: Using ACPI for IRQ routing
[ 0.345191] PCI: pci_cache_line_size set to 64 bytes
[ 0.345220] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.345231] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.345237] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.345242] e820: reserve RAM buffer [mem 0x78d0f000-0x7bffffff]
[ 0.345248] e820: reserve RAM buffer [mem 0x79d41000-0x7bffffff]
[ 0.345252] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[ 0.345471] NetLabel: Initializing
[ 0.345479] NetLabel: domain hash size = 128
[ 0.345485] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.345519] NetLabel: unlabeled traffic allowed by default
[ 0.345696] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.345713] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.347801] Switched to clocksource hpet
[ 0.360503] AppArmor: AppArmor Filesystem Enabled
[ 0.360578] pnp: PnP ACPI init
[ 0.360614] ACPI: bus type PNP registered
[ 0.360746] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.360909] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.361304] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.361422] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.361436] system 00:03: [io 0x0400-0x047f] has been reserved
[ 0.361446] system 00:03: [io 0x0500-0x05fe] has been reserved
[ 0.361455] system 00:03: [io 0x0600-0x061f] has been reserved
[ 0.361466] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.361478] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.362207] pnp 00:04: Plug and Play ACPI device, IDs INT0002 (active)
[ 0.362345] pnp 00:05: Plug and Play ACPI device, IDs INT33fc (active)
[ 0.362483] pnp 00:06: Plug and Play ACPI device, IDs INT33fc (active)
[ 0.362617] pnp 00:07: Plug and Play ACPI device, IDs INT33fc (active)
[ 0.363351] system 00:08: [io 0x0240-0x0259] has been reserved
[ 0.363366] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.363452] pnp 00:09: unknown resource type 19 in _CRS
[ 0.363462] pnp 00:09: can't evaluate _CRS: 1
[ 0.363521] pnp 00:09: Plug and Play ACPI device, IDs BCM2e39 (active)
[ 0.364310] pnp 00:0a: unknown resource type 17 in _CRS
[ 0.364320] pnp 00:0a: can't evaluate _CRS: 1
[ 0.364389] pnp 00:0a: Plug and Play ACPI device, IDs INT33f0 (active)
[ 0.364654] pnp 00:0b: unknown resource type 19 in _CRS
[ 0.364664] pnp 00:0b: can't evaluate _CRS: 1
[ 0.364730] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c50 (active)
[ 0.364960] pnp 00:0c: unknown resource type 19 in _CRS
[ 0.364971] pnp 00:0c: can't evaluate _CRS: 1
[ 0.365038] pnp 00:0c: Plug and Play ACPI device, IDs INT33fd (active)
[ 0.365204] pnp 00:0d: unknown resource type 17 in _CRS
[ 0.365214] pnp 00:0d: can't evaluate _CRS: 1
[ 0.365278] pnp 00:0d: Plug and Play ACPI device, IDs INTcfd9 PNP0c40 (active)
[ 0.365393] pnp 00:0e: Plug and Play ACPI device, IDs INT33bd (active)
[ 0.365772] pnp 00:0f: Plug and Play ACPI device, IDs INT3401 (active)
[ 0.365964] pnp 00:10: unknown resource type 17 in _CRS
[ 0.365975] pnp 00:10: can't evaluate _CRS: 1
[ 0.366045] pnp 00:10: Plug and Play ACPI device, IDs INT3403 (active)
[ 0.366144] pnp 00:11: unknown resource type 17 in _CRS
[ 0.366155] pnp 00:11: can't evaluate _CRS: 1
[ 0.366218] pnp 00:11: Plug and Play ACPI device, IDs INT3403 (active)
[ 0.366319] pnp 00:12: unknown resource type 17 in _CRS
[ 0.366329] pnp 00:12: can't evaluate _CRS: 1
[ 0.366399] pnp 00:12: Plug and Play ACPI device, IDs INT3403 (active)
[ 0.366649] pnp: PnP ACPI: found 19 devices
[ 0.366658] ACPI: bus type PNP unregistered
[ 0.373014] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 0.373023] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 0.373029] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 0.373035] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.373041] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.373047] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 0.373053] pci_bus 0000:00: resource 10 [mem 0x90c00000-0x90ffffff]
[ 0.373059] pci_bus 0000:00: resource 11 [mem 0x7b000001-0x7f000000]
[ 0.373065] pci_bus 0000:00: resource 12 [mem 0x80000000-0x908ffffe]
[ 0.373071] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed40fff]
[ 0.373147] NET: Registered protocol family 2
[ 0.373551] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.373676] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.373802] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.373863] TCP: reno registered
[ 0.373880] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.373923] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.374082] NET: Registered protocol family 1
[ 0.374118] pci 0000:00:02.0: Boot video device
[ 0.374519] PCI: CLS 0 bytes, default 64
[ 0.374694] Trying to unpack rootfs image as initramfs...
[ 11.577544] Freeing initrd memory: 20848K (ffff880035738000 - ffff880036b94000)
[ 11.578048] microcode: CPU0 sig=0x30673, pf=0x2, revision=0x31e
[ 11.578077] microcode: CPU1 sig=0x30673, pf=0x2, revision=0x31e
[ 11.578098] microcode: CPU2 sig=0x30673, pf=0x2, revision=0x31e
[ 11.578120] microcode: CPU3 sig=0x30673, pf=0x2, revision=0x31e
[ 11.578271] microcode: Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba
[ 11.578285] Scanning for low memory corruption every 60 seconds
[ 11.579010] Initialise system trusted keyring
[ 11.579143] audit: initializing netlink socket (disabled)
[ 11.579182] type=2000 audit(1400210321.540:1): initialized
[ 11.641842] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 11.645361] VFS: Disk quotas dquot_6.5.2
[ 11.645484] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 11.646810] fuse init (API version 7.22)
[ 11.647021] msgmni has been set to 3686
[ 11.647165] Key type big_key registered
[ 11.648245] Key type asymmetric registered
[ 11.648255] Asymmetric key parser 'x509' registered
[ 11.648345] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 11.648458] io scheduler noop registered
[ 11.648467] io scheduler deadline registered (default)
[ 11.648542] io scheduler cfq registered
[ 11.648726] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.648770] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 11.648899] efifb: probing for efifb
[ 11.649331] efifb: framebuffer at 0x80000000, mapped to 0xffffc90000480000, using 1920k, total 1920k
[ 11.649341] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 11.649347] efifb: scrolling: redraw
[ 11.649355] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 11.654174] Console: switching to colour frame buffer device 100x37
[ 11.658884] fb0: EFI VGA frame buffer device
[ 11.658998] intel_idle: does not run on family 6 model 55
[ 11.659019] ipmi message handler version 39.2
[ 11.659492] ACPI: AC Adapter [ADP1] (on-line)
[ 11.659955] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 11.660117] ACPI: Lid Switch [LID]
[ 11.660270] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 11.660404] ACPI: Sleep Button [SLPB]
[ 11.660559] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 11.660680] ACPI: Power Button [PWRF]
[ 11.660743] ACPI Warning: Could not enable fixed event - PowerButton (2) (20131115/evxface-628)
[ 11.667927] button: probe of LNXPWRBN:00 failed with error -22
[ 11.671205] Monitor-Mwait will be used to enter C-1 state
[ 11.671225] Monitor-Mwait will be used to enter C-2 state
[ 11.671251] ACPI: acpi_idle registered with cpuidle
[ 11.673711] [Firmware Bug]: No valid trip found
[ 11.676509] GHES: HEST is not enabled!
[ 11.679386] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 11.702461] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 11.710621] Linux agpgart interface v0.103
[ 11.717386] brd: module loaded
[ 11.722187] loop: module loaded
[ 11.725804] libphy: Fixed MDIO Bus: probed
[ 11.728701] tun: Universal TUN/TAP device driver, 1.6
[ 11.731362] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 11.734217] PPP generic driver version 2.4.2
[ 11.737051] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.739814] ehci-pci: EHCI PCI platform driver
[ 11.742525] ehci-platform: EHCI generic platform driver
[ 11.745266] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.748013] ohci-pci: OHCI PCI platform driver
[ 11.750768] ohci-platform: OHCI generic platform driver
[ 11.753543] uhci_hcd: USB Universal Host Controller Interface driver
[ 11.756597] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 11.759339] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 11.762264] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 11.762313] xhci_hcd 0000:00:14.0: irq 103 for MSI/MSI-X
[ 11.762494] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.765245] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.767974] usb usb1: Product: xHCI Host Controller
[ 11.770670] usb usb1: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[ 11.773409] usb usb1: SerialNumber: 0000:00:14.0
[ 11.776413] hub 1-0:1.0: USB hub found
[ 11.779092] hub 1-0:1.0: 6 ports detected
[ 11.782978] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 11.785673] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 11.788477] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 11.791113] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.793731] usb usb2: Product: xHCI Host Controller
[ 11.796291] usb usb2: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[ 11.798831] usb usb2: SerialNumber: 0000:00:14.0
[ 11.801689] hub 2-0:1.0: USB hub found
[ 11.804146] hub 2-0:1.0: 1 port detected
[ 11.812390] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 12.576045] tsc: Refined TSC clocksource calibration: 1333.332 MHz
[ 12.850163] i8042: No controller found
[ 12.853209] mousedev: PS/2 mouse device common for all mice
[ 12.855945] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20131115/evxface-628)
[ 12.858623] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 12.861160] rtc_cmos 00:00: alarms up to one day, 242 bytes nvram, hpet irqs
[ 12.863874] device-mapper: uevent: version 1.0.3
[ 12.866690] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 12.869337] ledtrig-cpu: registered to indicate activity on CPUs
[ 12.872207] TCP: cubic registered
[ 12.875031] NET: Registered protocol family 10
[ 12.878031] NET: Registered protocol family 17
[ 12.880575] Key type dns_resolver registered
[ 12.884848] Loading compiled-in X.509 certificates
[ 12.890163] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[ 12.895336] registered taskstats version 1
[ 12.907258] Key type trusted registered
[ 12.918255] Key type encrypted registered
[ 12.929105] AppArmor: AppArmor sha1 policy hashing enabled
[ 12.931617] IMA: No TPM chip found, activating TPM-bypass!
[ 12.934365] regulator-dummy: disabling
[ 12.937288] Magic number: 14:780:310
[ 12.939790] tty tty39: hash matches
[ 12.942594] rtc_cmos 00:00: setting system clock to 2014-05-16 03:18:43 UTC (1400210323)
[ 12.947167] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 12.949037] EDD information not available.
[ 12.950953] PM: Hibernation image not present or could not be loaded.
[ 12.953543] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[ 12.955460] Write protecting the kernel read-only data: 12288k
[ 12.963043] Freeing unused kernel memory: 844K (ffff88000272d000 - ffff880002800000)
[ 12.969429] Freeing unused kernel memory: 708K (ffff880002b4f000 - ffff880002c00000)
[ 13.009947] systemd-udevd[117]: starting version 204
[ 13.040872] sdhci: Secure Digital Host Controller Interface driver
[ 13.042853] sdhci: Copyright(c) Pierre Ossman
[ 13.048987] sdhci-acpi 80860F14:00: dummy supplies not allowed
[ 13.050967] mmc0: no vqmmc regulator found
[ 13.052937] sdhci-acpi 80860F14:00: dummy supplies not allowed
[ 13.054885] mmc0: no vmmc regulator found
[ 13.057974] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 13.061285] sdhci-acpi INT33BB:00: dummy supplies not allowed
[ 13.063190] mmc1: no vqmmc regulator found
[ 13.063860] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 13.066972] sdhci-acpi INT33BB:00: dummy supplies not allowed
[ 13.068863] mmc1: no vmmc regulator found
[ 13.071857] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 13.072323] wmi: Mapper loaded
[ 13.079493] sdhci-acpi 80860F14:01: dummy supplies not allowed
[ 13.081436] mmc2: no vqmmc regulator found
[ 13.082871] usb 1-3: New USB device found, idVendor=0b05, idProduct=17e0
[ 13.082874] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.082877] usb 1-3: Product: ASUS Base Station(T100)
[ 13.082879] usb 1-3: Manufacturer: ASUSTek COMPUTER INC.
[ 13.091031] [drm] Initialized drm 1.1.0 20060810
[ 13.091368] sdhci-acpi 80860F14:01: dummy supplies not allowed
[ 13.091370] mmc2: no vmmc regulator found
[ 13.092519] mmc2: SDHCI controller on ACPI [80860F14:01] using ADMA
[ 13.092525] sdhci-acpi 80860F14:01: failed to setup card detect wake up
[ 13.185953] mmc0: BKOPS_EN bit is not set
[ 13.188655] hidraw: raw HID events driver (C) Jiri Kosina
[ 13.198819] usbcore: registered new interface driver usbhid
[ 13.200771] usbhid: USB HID core driver
[ 13.202665] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 13.208396] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input3
[ 13.212571] hid-generic 0003:0B05:17E0.0001: input,hidraw0: USB HID v1.11 Keyboard [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input0
[ 13.217374] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/input/input4
[ 13.222039] hid-generic 0003:0B05:17E0.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input1
[ 13.227098] input: ASUSTek COMPUTER INC. ASUS Base Station(T100) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/input/input5
[ 13.231697] usb 2-1: New USB device found, idVendor=125f, idProduct=db8a
[ 13.233970] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 13.234956] hid-generic 0003:0B05:17E0.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [ASUSTek COMPUTER INC. ASUS Base Station(T100)] on usb-0000:00:14.0-3/input2
[ 13.240810] usb 2-1: Product: ADATA USB Flash Drive
[ 13.243129] usb 2-1: Manufacturer: ADATA
[ 13.245436] usb 2-1: SerialNumber: 13B15005312400C4
[ 13.270397] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 13.271883] mmc0: new HS200 MMC card at address 0001
[ 13.275214] scsi0 : usb-storage 2-1:1.0
[ 13.277973] mmcblk0: mmc0:0001 HCG8e\x04 58.2 GiB
[ 13.280440] mmcblk0boot0: mmc0:0001 HCG8e\x04 partition 1 4.00 MiB
[ 13.282862] usbcore: registered new interface driver usb-storage
[ 13.285387] mmcblk0boot1: mmc0:0001 HCG8e\x04 partition 2 4.00 MiB
[ 13.287818] mmcblk0rpmb: mmc0:0001 HCG8e\x04 partition 3 4.00 MiB
[ 13.294339] mmcblk0: p1 p2 p3 p4 p5
[ 13.301296] mmcblk0boot1: unknown partition table
[ 13.306639] mmcblk0boot0: unknown partition table
[ 13.576543] Switched to clocksource tsc
[ 14.491959] scsi 0:0:0:0: Direct-Access ADATA USB Flash Drive 1100 PQ: 0 ANSI: 6
[ 14.495417] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.496348] sd 0:0:0:0: [sda] 61341696 512-byte logical blocks: (31.4 GB/29.2 GiB)
[ 14.496928] sd 0:0:0:0: [sda] Write Protect is off
[ 14.496932] sd 0:0:0:0: [sda] Mode Sense: 22 00 00 00
[ 14.497570] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 14.515861] sda: sda1
[ 14.522015] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 21.682767] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 21.687166] mmcblk0rpmb: retrying using single block read
[ 21.691368] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 21.695552] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 21.699653] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 21.703672] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 21.707612] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 21.711465] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 21.713201] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 21.714912] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 21.719180] random: nonblocking pool is initialized
[ 29.996516] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 29.999946] mmcblk0rpmb: retrying using single block read
[ 30.003735] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 30.007566] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 30.011351] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 30.015093] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 30.018799] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 30.022472] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 30.024073] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 30.025658] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 38.222950] mmcblk0rpmb: error -110 transferring data, sector 8176, nr 8, cmd response 0x900, card status 0xb00
[ 38.226245] mmcblk0rpmb: retrying using single block read
[ 38.229975] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 38.233770] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 38.237531] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 38.241229] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 38.244869] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 38.248458] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 38.249957] end_request: I/O error, dev mmcblk0rpmb, sector 8176
[ 38.251451] Buffer I/O error on device mmcblk0rpmb, logical block 1022
[ 46.448600] mmcblk0rpmb: error -110 transferring data, sector 8176, nr 8, cmd response 0x900, card status 0xb00
[ 46.448719] mmcblk0rpmb: retrying using single block read
[ 46.450821] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 46.452964] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 46.455083] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 46.457216] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 46.459335] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 46.461466] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 46.461549] end_request: I/O error, dev mmcblk0rpmb, sector 8176
[ 46.461617] Buffer I/O error on device mmcblk0rpmb, logical block 1022
[ 55.061506] mmcblk0rpmb: error -110 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00
[ 55.065260] mmcblk0rpmb: retrying using single block read
[ 55.069183] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.073086] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.077043] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.080817] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.084592] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.088364] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.090090] end_request: I/O error, dev mmcblk0rpmb, sector 0
[ 55.091864] Buffer I/O error on device mmcblk0rpmb, logical block 0
[ 55.093685] end_request: I/O error, dev mmcblk0rpmb, sector 8
[ 55.095496] Buffer I/O error on device mmcblk0rpmb, logical block 1
[ 55.097312] end_request: I/O error, dev mmcblk0rpmb, sector 16
[ 55.099105] Buffer I/O error on device mmcblk0rpmb, logical block 2
[ 55.100958] end_request: I/O error, dev mmcblk0rpmb, sector 24
[ 55.102814] Buffer I/O error on device mmcblk0rpmb, logical block 3
[ 63.300258] mmcblk0rpmb: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00
[ 63.304068] mmcblk0rpmb: retrying using single block read
[ 63.308031] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.312004] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.315924] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.319794] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.323616] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.327401] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.329094] end_request: I/O error, dev mmcblk0rpmb, sector 0
[ 63.330768] Buffer I/O error on device mmcblk0rpmb, logical block 0
[ 71.931648] mmcblk0rpmb: error -110 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00
[ 71.935115] mmcblk0rpmb: retrying using single block read
[ 71.938920] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 71.942722] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 71.946471] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 71.950163] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 71.953807] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 71.957375] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 71.958814] end_request: I/O error, dev mmcblk0rpmb, sector 0
[ 71.960256] Buffer I/O error on device mmcblk0rpmb, logical block 0
[ 71.961698] end_request: I/O error, dev mmcblk0rpmb, sector 8
[ 71.963175] Buffer I/O error on device mmcblk0rpmb, logical block 1
[ 71.964719] end_request: I/O error, dev mmcblk0rpmb, sector 16
[ 71.966290] Buffer I/O error on device mmcblk0rpmb, logical block 2
[ 71.967918] end_request: I/O error, dev mmcblk0rpmb, sector 24
[ 71.969585] Buffer I/O error on device mmcblk0rpmb, logical block 3
[ 80.166817] mmcblk0rpmb: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00
[ 80.170221] mmcblk0rpmb: retrying using single block read
[ 80.173987] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 80.177769] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 80.181637] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 80.185326] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 80.188967] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 80.192530] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 80.193968] end_request: I/O error, dev mmcblk0rpmb, sector 0
[ 80.195396] Buffer I/O error on device mmcblk0rpmb, logical block 0
[ 88.411154] mmcblk0rpmb: error -110 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00
[ 88.414381] mmcblk0rpmb: retrying using single block read
[ 88.418127] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 88.421934] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 88.425685] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 88.429388] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 88.433034] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 88.436601] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 88.438041] end_request: I/O error, dev mmcblk0rpmb, sector 0
[ 88.439475] Buffer I/O error on device mmcblk0rpmb, logical block 0
[ 88.440928] end_request: I/O error, dev mmcblk0rpmb, sector 8
[ 88.442406] Buffer I/O error on device mmcblk0rpmb, logical block 1
[ 88.443941] end_request: I/O error, dev mmcblk0rpmb, sector 16
[ 88.445516] Buffer I/O error on device mmcblk0rpmb, logical block 2
[ 88.447141] end_request: I/O error, dev mmcblk0rpmb, sector 24
[ 88.448821] Buffer I/O error on device mmcblk0rpmb, logical block 3
[ 96.646051] mmcblk0rpmb: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00
[ 96.649460] mmcblk0rpmb: retrying using single block read
[ 96.653235] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 96.657019] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 96.660754] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 96.664440] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 96.668083] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 96.671638] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 96.673083] end_request: I/O error, dev mmcblk0rpmb, sector 0
[ 96.674517] Buffer I/O error on device mmcblk0rpmb, logical block 0
[ 96.931642] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 102.523746] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock
[ 102.526996] mmc0: Got data interrupt 0x00600000 even though no data operation was in progress.
[ 110.763118] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 110.766581] mmcblk0rpmb: retrying using single block read
[ 110.770378] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 110.774184] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 110.777944] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 110.781632] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 110.785239] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 110.788797] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 110.790260] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 110.791775] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 119.226556] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 119.229902] mmcblk0rpmb: retrying using single block read
[ 119.233708] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 119.237519] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 119.241281] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 119.244995] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 119.248657] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 119.252310] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 119.253869] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 119.255413] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 127.452834] mmcblk0rpmb: error -110 transferring data, sector 8176, nr 8, cmd response 0x900, card status 0xb00
[ 127.456062] mmcblk0rpmb: retrying using single block read
[ 127.459755] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 127.463492] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 127.467220] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 127.470913] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 127.474614] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 127.478289] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 127.479904] end_request: I/O error, dev mmcblk0rpmb, sector 8176
[ 127.481524] Buffer I/O error on device mmcblk0rpmb, logical block 1022
[ 135.678772] mmcblk0rpmb: error -110 transferring data, sector 8176, nr 8, cmd response 0x900, card status 0xb00
[ 135.681924] mmcblk0rpmb: retrying using single block read
[ 135.685583] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 135.689374] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 135.693089] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 135.696563] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 135.700046] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 135.703596] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 135.705044] end_request: I/O error, dev mmcblk0rpmb, sector 8176
[ 135.706522] Buffer I/O error on device mmcblk0rpmb, logical block 1022
[ 143.147169] systemd-udevd[1120]: starting version 204
[ 143.334108] lp: driver loaded but no devices found
[ 143.352304] ppdev: user-space parallel port driver
[ 143.420011] 80860F0A:00: ttyS4 at MMIO 0x9094d000 (irq = 39, base_baud = 2764800) is a 16550A
[ 143.476442] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 143.479322] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 143.663953] Bluetooth: Core ver 2.17
[ 143.664033] NET: Registered protocol family 31
[ 143.664037] Bluetooth: HCI device and connection manager initialized
[ 143.664050] Bluetooth: HCI socket layer initialized
[ 143.664055] Bluetooth: L2CAP socket layer initialized
[ 143.664065] Bluetooth: SCO socket layer initialized
[ 143.679688] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock
[ 143.679710] mmc0: Got data interrupt 0x00600000 even though no data operation was in progress.
[ 143.695778] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 143.695785] Bluetooth: BNEP filters: protocol multicast
[ 143.695799] Bluetooth: BNEP socket layer initialized
[ 143.711941] Bluetooth: RFCOMM TTY layer initialized
[ 143.711963] Bluetooth: RFCOMM socket layer initialized
[ 143.711977] Bluetooth: RFCOMM ver 1.11
[ 143.896047] device-mapper: multipath: version 1.6.0 loaded
[ 144.064584] init: cups main process (1233) killed by HUP signal
[ 144.064620] init: cups main process ended, respawning
[ 144.353364] asus_wmi: ASUS WMI generic driver loaded
[ 144.378227] input: ATML1000:00 03EB:8C0D as /devices/platform/80860F41:05/i2c-5/i2c-ATML1000:00/input/input6
[ 144.379561] hid-multitouch 0018:03EB:8C0D.0004: input,hidraw3: <unknown> HID v1.00 Device [ATML1000:00 03EB:8C0D] on
[ 144.386695] asus_wmi: Initialization: 0x1
[ 144.386804] asus_wmi: BIOS WMI version: 7.9
[ 144.386879] asus_wmi: SFUN value: 0x37
[ 144.389892] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input8
[ 144.403156] asus_wmi: Backlight controlled by ACPI video driver
[ 144.484194] init: failsafe main process (1344) killed by TERM signal
[ 145.650778] init: plymouth-upstart-bridge main process ended, respawning
[ 146.075546] init: plymouth-stop pre-start process (1936) terminated with status 1
[ 152.163242] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 152.166144] mmcblk0rpmb: retrying using single block read
[ 152.168213] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 152.171830] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 152.175444] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 152.179065] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 152.182824] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 152.186463] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 152.187940] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 152.189397] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 160.500286] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 160.503161] mmcblk0rpmb: retrying using single block read
[ 160.505359] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 160.509106] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 160.512908] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 160.516700] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 160.520491] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 160.524162] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 160.525653] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 160.527127] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 168.729827] mmcblk0rpmb: error -110 transferring data, sector 8176, nr 8, cmd response 0x900, card status 0xb00
[ 168.732798] mmcblk0rpmb: retrying using single block read
[ 168.734991] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 168.738675] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 168.742338] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 168.745995] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 168.749574] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 168.753158] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 168.754623] end_request: I/O error, dev mmcblk0rpmb, sector 8176
[ 168.756142] Buffer I/O error on device mmcblk0rpmb, logical block 1022
[ 176.377512] init: udev-fallback-graphics main process (2089) terminated with status 1
[ 176.953331] mmcblk0rpmb: error -110 transferring data, sector 8176, nr 8, cmd response 0x900, card status 0xb00
[ 176.956420] mmcblk0rpmb: retrying using single block read
[ 176.958543] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 176.962294] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 176.966029] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 176.969664] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 176.973362] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 176.976985] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 176.978347] end_request: I/O error, dev mmcblk0rpmb, sector 8176
[ 176.979698] Buffer I/O error on device mmcblk0rpmb, logical block 1022</unknown>

Any ideas???

TIA
Mike

 

Last edit: Mike B 2014-05-23