Could you please give testing Clonezilla live 2.4.7-12 a try? http://clonezilla.org/downloads.php
It comes with newer Linux kernel (4.6.3) so it might support your hardware better.
//NOTE// Backup important data before you use Clonezilla. Just in case.
Steven
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
However, I tried the "alternative version, Clonezilla live version: 20160627-xenial" and the message still appears
"Every 3., 0s: ocs-scan disc
disk (s) Avaible on this machine:
Excluding partition or disk busy ...
/ Dev / nda: lenomdemondisquedur with ability.
periodic updating."
I press Ctrl-C to exit this window and my hard drive is finally recognized !
Apparently I needed to use "uEFI secure boot", and to use AMD64 version of alternative (Ubuntu-based) Clonezilla live.
The topic is resolved.
Thank you !
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I use frequently clonezilla to create images on external hard drive, and I am facing a problem.
I am running win 7 to create an image of a 128GB SSD.
The choices I use:
-device-disk / partition image from / picture (1st choice)
-local dev (because I want the picture comes on my external hard drive)
I plug my DD and wait approx. 5sec.
-" Entrance "
And at that time, I have this message:
"Every 3., 0s: ocs-scan-disk
Avaible disk (s) on this machine:
Excluding busy partition or disk ...
/ Dev / nda: le_nom_de_mon_disque_dur with ability.
Periodically update. Press Ctrl-C to exit this window. "
-I Press Ctrl-C
And arrives on the choice of the destination disk BUT obviously my external hard drive does not appear.
therefore impossible to select my DD ext.
For info:
I use Yumi and tried different iso clonezilla (stable at 64 or 86 but also stable alternative) and I have already changed ext disk (1TB and 500GB).
Someone already faced this message?
In advance thank you for your answers.
Could you please give testing Clonezilla live 2.4.7-12 a try?
http://clonezilla.org/downloads.php
It comes with newer Linux kernel (4.6.3) so it might support your hardware better.
//NOTE// Backup important data before you use Clonezilla. Just in case.
Steven
Hello,
Thank you for your answer, but it did not work.
However, I tried the "alternative version, Clonezilla live version: 20160627-xenial" and the message still appears
"Every 3., 0s: ocs-scan disc
disk (s) Avaible on this machine:
Excluding partition or disk busy ...
/ Dev / nda: lenomdemondisquedur with ability.
periodic updating."
I press Ctrl-C to exit this window and my hard drive is finally recognized !
Apparently I needed to use "uEFI secure boot", and to use AMD64 version of alternative (Ubuntu-based) Clonezilla live.
The topic is resolved.
Thank you !
OK, thanks for sharing that.
Steven