Hi,
I've just started working with CR this week, so I'm sure this is
something dumb, but I haven't been able to figure it out. I got the
crdemo.config working fine.
My aim is to have a tiled display on one machine with one tile on each
of the two outputs on my video card (quadro FX 1500). I have my
xorg.conf file set up to have two separate X screens. I've also tried
it with twinview enabled just in case.
The 'display_string' attribute seemed to have no effect before I
commented it out. I had thought the display_string would send it to one
video output or the other.
I'm running cr1.9 on Mandriva 2007 64bit, Athlon X2.
With the config file below, I get no errors, but nothing renders (no
windows open) and the fps line never shows up in the console. When I
comment out everything related to server2, everything runs as expected,
with an empty app window and a single atlantis window. I was expecting
two atlantis windows with the second server in use. Any help is
appreciated.
thanks,
morris
# All rights reserved
#
# See the file LICENSE.txt for information on redistributing this software.
import sys
sys.path.append( '../server' )
from mothership import *
demo = 'atlantis'
clientspuname = 'tilesort'
server1_spu = SPU( 'render' )
server2_spu = SPU( 'render' )
client_spu = SPU( clientspuname )
W = 500
H = 500
server1_spu.Conf( 'window_geometry', [50, 50, W, H] )
#server1_spu.Conf( 'display_string', ':0' )
server2_spu.Conf( 'window_geometry', [600, 50, W, H] )
#server2_spu.Conf( 'display_string', ':1' )
server1_node = CRNetworkNode( 'localhost' )
server2_node = CRNetworkNode( 'localhost' )
server1_node.AddSPU( server1_spu )
server2_node.AddSPU( server2_spu )
server1_node.AddTile( 0, 0, W, H )
server2_node.AddTile( 500, 0, W, H )
client_node = CRApplicationNode( )
client_node.AddSPU( client_spu )
client_spu.AddServer( server1_node, protocol='tcpip', port=7000 )
client_spu.AddServer( server2_node, protocol='tcpip', port=7001 )
client_node.SetApplication( demo )
client_node.StartDir( crbindir )
cr = CR()
cr.MTU( 1024*1024 )
cr.AddNode( client_node )
cr.AddNode( server1_node )
cr.AddNode( server2_node )
cr.Go()
|
