Hi!
I m starting in UPnP and I m facing some problems: Normal!
I put clink170.jar in my java home and jre
idem with xerces.
I can launch the washer and the control point
BUT I cannot see the washer in the control point
the log of the ctrlpoint:
ssdp:alive : uuid = uuid:PS-11424A, NT = uuid:PS-11424A, location = http://169.254.66.74:2251/desc1.xml
ssdp:alive : uuid = uuid:PS-11424A::urn:schemas-upnp-org:device:PrintServer:1, NT = urn:schemas-upnp-org:device:PrintServer:1, location = http://169.254.66.74:2251/desc1.xml
ssdp:alive : uuid = uuid:PS-11424A::upnp:rootdevice, NT = upnp:rootdevice, location = http://169.254.66.74:2251/desc1.xml
ssdp:alive : uuid = uuid:PS-11424A::urn:schemas-upnp-org:service:PrintBasic:1, NT = urn:schemas-upnp-org:service:PrintBasic:1, location = http://169.254.66.74:2251/desc1.xml
ssdp:alive : uuid = uuid:PS-11424A::urn:schemas-upnp-org:service:Power:1, NT = urn:schemas-upnp-org:service:Power:1, location = http://169.254.66.74:2251/desc1.xml
Did I forget to do something?
Thanks for your help
Michael
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Which OS are you using?
Are you running all the application on the same machine?
If not, are those machine connected to the network and able to ping each other?
Can you set IP to something more standard like 192.168.1.10 and try again?
Sorry for the late answer,
Stefano "Kismet" Lenzi
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Yes, I run all the samples on the same machine, Os is Windows XP.
My IP is not a Vitural IP, it static and public,I am sure that i can ping all the machine in my Internet subnet.
Here is my Ehternet adapter Confiuration:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 140.123.105.36
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : fe80::20d:60ff:fe68:f2ca%4
Default Gateway . . . . . . . . . : 140.123.105.250
Sorry in advance about my poor English
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi calais,
first of all I've a question: why have you answered to my questions on a different thread?
Now let's go back to your problem:
I think to know you're probelm, it's related to the use of IPv6 you should disable it on your interfaces or you should disable CyberLink to try to use IPv6, usually that error come up on Linux, Unix and MacOS X that have IPv6 enabled by default.
Finally which version of CyberLink are you using?
Stefano "Kismet" Lenzi
P.S.: Don't worry about you're english I'm Italian and mine is also not so good.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi!
I m starting in UPnP and I m facing some problems: Normal!
I put clink170.jar in my java home and jre
idem with xerces.
I can launch the washer and the control point
BUT I cannot see the washer in the control point
the log of the ctrlpoint:
ssdp:alive : uuid = uuid:PS-11424A, NT = uuid:PS-11424A, location = http://169.254.66.74:2251/desc1.xml
ssdp:alive : uuid = uuid:PS-11424A::urn:schemas-upnp-org:device:PrintServer:1, NT = urn:schemas-upnp-org:device:PrintServer:1, location = http://169.254.66.74:2251/desc1.xml
ssdp:alive : uuid = uuid:PS-11424A::upnp:rootdevice, NT = upnp:rootdevice, location = http://169.254.66.74:2251/desc1.xml
ssdp:alive : uuid = uuid:PS-11424A::urn:schemas-upnp-org:service:PrintBasic:1, NT = urn:schemas-upnp-org:service:PrintBasic:1, location = http://169.254.66.74:2251/desc1.xml
ssdp:alive : uuid = uuid:PS-11424A::urn:schemas-upnp-org:service:Power:1, NT = urn:schemas-upnp-org:service:Power:1, location = http://169.254.66.74:2251/desc1.xml
Did I forget to do something?
Thanks for your help
Michael
Which OS are you using?
Are you running all the application on the same machine?
If not, are those machine connected to the network and able to ping each other?
Can you set IP to something more standard like 192.168.1.10 and try again?
Sorry for the late answer,
Stefano "Kismet" Lenzi
Yes, I run all the samples on the same machine, Os is Windows XP.
My IP is not a Vitural IP, it static and public,I am sure that i can ping all the machine in my Internet subnet.
Here is my Ehternet adapter Confiuration:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 140.123.105.36
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : fe80::20d:60ff:fe68:f2ca%4
Default Gateway . . . . . . . . . : 140.123.105.250
Sorry in advance about my poor English
Hi calais,
first of all I've a question: why have you answered to my questions on a different thread?
Now let's go back to your problem:
I think to know you're probelm, it's related to the use of IPv6 you should disable it on your interfaces or you should disable CyberLink to try to use IPv6, usually that error come up on Linux, Unix and MacOS X that have IPv6 enabled by default.
Finally which version of CyberLink are you using?
Stefano "Kismet" Lenzi
P.S.: Don't worry about you're english I'm Italian and mine is also not so good.