please a tip..!
When burning a flac + cue sheet in order to create an audio cd, which mode should I select, the DAO or TAO one? Does anything change in the final result?
Thanks -)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
When writing cue images (with the CD image project) the writing mode is automatically set to disc at once (DAO), regardless what setting has been chosen before. Writing cue images in track at onece mode is currently not supported with cdrecord.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Yes, if the cue sheet already contains CD Text information. Currently cdrtfe does not support editing cue sheets or CD Text information from cue sheets. To write a CD with CD Text using cue sheets, you have to enable the option 'Write CD Text' from the Audio CD project (tab 'Audio CD' -> Options).
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
ups CD burn okay sofar but CD-TEXT failed (missing at all)
I did those settings as you described it. The CUE contains definitively CD-Text
the log
C:\Programme\cdrtfe\tools\cdrtools\cdrecord gracetime=5 dev=1,0,0 speed=24 driveropts=burnfree -pad -dao cuefile="/cygdrive/K/unsorted/Tok Tok Tok - Reach Out ... And Sway Your Booty/cd1.cue"
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Cdrecord-ProDVD-ProBD-Clone 2.01.01a31 (i586-pc-cygwin) Copyright (C) 1995-2007 Jörg Schilling
Using libscg version 'schily-0.9'.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4120B'
Revision : 'A117'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Starting to write CD/DVD/BD at speed 24 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts./cygdrive/c/Programme/cdrtfe/tools/cdrtools/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Track 01: Total bytes read/written: 43643712/43643712 (18556 sectors).
Track 02: Total bytes read/written: 44118816/44118816 (18758 sectors).
Track 03: Total bytes read/written: 62551440/62551440 (26595 sectors).
Track 04: Total bytes read/written: 82148304/82148304 (34927 sectors).
Track 05: Total bytes read/written: 79822176/79822176 (33938 sectors).
Track 06: Total bytes read/written: 43446144/43446144 (18472 sectors).
Track 07: Total bytes read/written: 89646480/89646480 (38115 sectors).
Track 08: Total bytes read/written: 48898080/48898080 (20790 sectors).
Track 09: Total bytes read/written: 71063328/71063328 (30214 sectors).
Ausführung beendet.
CUE:
REM GENRE Jazz
REM DATE 2007
REM DISCID 7F0C8409
PERFORMER "Tok Tok Tok"
TITLE "Reach Out And Sway Your Booty [cd 1]"
FILE "Image1.wav" WAVE
TRACK 01 AUDIO
TITLE "You Drive Me Crazy"
PERFORMER "Tok Tok Tok"
ISRC DEA310701051
FLAGS DCP
INDEX 01 00:00:00
TRACK 02 AUDIO
TITLE "The Weight"
PERFORMER "Tok Tok Tok"
ISRC DEA310701051
FLAGS DCP
INDEX 01 04:07:31
TRACK 03 AUDIO
TITLE "It Took So Long"
PERFORMER "Tok Tok Tok"
ISRC DEA310701053
FLAGS DCP
INDEX 01 08:17:39
TRACK 04 AUDIO
TITLE "Drowning In Love"
PERFORMER "Tok Tok Tok"
ISRC DEA310701054
FLAGS DCP
INDEX 01 14:12:09
TRACK 05 AUDIO
TITLE "The Breakdown"
PERFORMER "Tok Tok Tok"
ISRC DEA310701055
FLAGS DCP
INDEX 01 21:57:61
TRACK 06 AUDIO
TITLE "Can You Keep It"
PERFORMER "Tok Tok Tok"
ISRC DEA310701056
FLAGS DCP
INDEX 01 29:30:24
TRACK 07 AUDIO
TITLE "Get Away"
PERFORMER "Tok Tok Tok"
ISRC DEA310701057
FLAGS DCP
INDEX 01 33:36:46
TRACK 08 AUDIO
TITLE "Toxido Junction"
PERFORMER "Tok Tok Tok"
ISRC DEA310701057
FLAGS DCP
INDEX 01 42:04:61
TRACK 09 AUDIO
TITLE "Don't Go Away"
PERFORMER "Tok Tok Tok"
ISRC DEA310701059
FLAGS DCP
INDEX 01 46:42:01
any idea?
bye
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm sorry, I should have mentioned that this function (writing CD Text from cue sheets when the CD Text option from the Audio CD project is enabled) requires cdrtfe version 1.2.7 or newer.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I tried using the option write cue image for a WAV+CUE with the CDRDAO option but the operation was unsuccessful even if I put cdrdao file in program folder. Am I doing something wrong?
ERROR: /cygdrive/C/Documents and Settings/xxxxxxxxxxxxxxxxxx.wav.cue:1: Illegal token: R
/cygdrive/C/Documents and Settingsxxxxxxxxxxxxxxxxxxxxxxxx.wav.cue:1: syntax error at "EOF" missing TrackDef
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
please a tip..!
When burning a flac + cue sheet in order to create an audio cd, which mode should I select, the DAO or TAO one? Does anything change in the final result?
Thanks -)
What happens, if you try to write the cue image with cdrecord?
If you really want to use cdrdao, then you have to place the file in the foler
<cdrtfe program folder>\tools\cdrdao
In addtion, the option 'Write CUE images with cdrdao' has to be enabled (Dialog 'Settings', tab sheet 'cdrdao').
If the error still occurs, then there may be something wrong with the cue file.
When writing cue images (with the CD image project) the writing mode is automatically set to disc at once (DAO), regardless what setting has been chosen before. Writing cue images in track at onece mode is currently not supported with cdrecord.
does the app support CD-Text if using CUESheet + WAV/APE/Flac or what ever?
Yes, if the cue sheet already contains CD Text information. Currently cdrtfe does not support editing cue sheets or CD Text information from cue sheets. To write a CD with CD Text using cue sheets, you have to enable the option 'Write CD Text' from the Audio CD project (tab 'Audio CD' -> Options).
Thank you!
und Grüße aus Stuttgart
ups CD burn okay sofar but CD-TEXT failed (missing at all)
I did those settings as you described it. The CUE contains definitively CD-Text
the log
C:\Programme\cdrtfe\tools\cdrtools\cdrecord gracetime=5 dev=1,0,0 speed=24 driveropts=burnfree -pad -dao cuefile="/cygdrive/K/unsorted/Tok Tok Tok - Reach Out ... And Sway Your Booty/cd1.cue"
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Cdrecord-ProDVD-ProBD-Clone 2.01.01a31 (i586-pc-cygwin) Copyright (C) 1995-2007 Jörg Schilling
Using libscg version 'schily-0.9'.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4120B'
Revision : 'A117'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Starting to write CD/DVD/BD at speed 24 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts./cygdrive/c/Programme/cdrtfe/tools/cdrtools/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Track 01: Total bytes read/written: 43643712/43643712 (18556 sectors).
Track 02: Total bytes read/written: 44118816/44118816 (18758 sectors).
Track 03: Total bytes read/written: 62551440/62551440 (26595 sectors).
Track 04: Total bytes read/written: 82148304/82148304 (34927 sectors).
Track 05: Total bytes read/written: 79822176/79822176 (33938 sectors).
Track 06: Total bytes read/written: 43446144/43446144 (18472 sectors).
Track 07: Total bytes read/written: 89646480/89646480 (38115 sectors).
Track 08: Total bytes read/written: 48898080/48898080 (20790 sectors).
Track 09: Total bytes read/written: 71063328/71063328 (30214 sectors).
Ausführung beendet.
CUE:
REM GENRE Jazz
REM DATE 2007
REM DISCID 7F0C8409
PERFORMER "Tok Tok Tok"
TITLE "Reach Out And Sway Your Booty [cd 1]"
FILE "Image1.wav" WAVE
TRACK 01 AUDIO
TITLE "You Drive Me Crazy"
PERFORMER "Tok Tok Tok"
ISRC DEA310701051
FLAGS DCP
INDEX 01 00:00:00
TRACK 02 AUDIO
TITLE "The Weight"
PERFORMER "Tok Tok Tok"
ISRC DEA310701051
FLAGS DCP
INDEX 01 04:07:31
TRACK 03 AUDIO
TITLE "It Took So Long"
PERFORMER "Tok Tok Tok"
ISRC DEA310701053
FLAGS DCP
INDEX 01 08:17:39
TRACK 04 AUDIO
TITLE "Drowning In Love"
PERFORMER "Tok Tok Tok"
ISRC DEA310701054
FLAGS DCP
INDEX 01 14:12:09
TRACK 05 AUDIO
TITLE "The Breakdown"
PERFORMER "Tok Tok Tok"
ISRC DEA310701055
FLAGS DCP
INDEX 01 21:57:61
TRACK 06 AUDIO
TITLE "Can You Keep It"
PERFORMER "Tok Tok Tok"
ISRC DEA310701056
FLAGS DCP
INDEX 01 29:30:24
TRACK 07 AUDIO
TITLE "Get Away"
PERFORMER "Tok Tok Tok"
ISRC DEA310701057
FLAGS DCP
INDEX 01 33:36:46
TRACK 08 AUDIO
TITLE "Toxido Junction"
PERFORMER "Tok Tok Tok"
ISRC DEA310701057
FLAGS DCP
INDEX 01 42:04:61
TRACK 09 AUDIO
TITLE "Don't Go Away"
PERFORMER "Tok Tok Tok"
ISRC DEA310701059
FLAGS DCP
INDEX 01 46:42:01
any idea?
bye
I'm sorry, I should have mentioned that this function (writing CD Text from cue sheets when the CD Text option from the Audio CD project is enabled) requires cdrtfe version 1.2.7 or newer.
I tried using the option write cue image for a WAV+CUE with the CDRDAO option but the operation was unsuccessful even if I put cdrdao file in program folder. Am I doing something wrong?
ERROR: /cygdrive/C/Documents and Settings/xxxxxxxxxxxxxxxxxx.wav.cue:1: Illegal token: R
/cygdrive/C/Documents and Settingsxxxxxxxxxxxxxxxxxxxxxxxx.wav.cue:1: syntax error at "EOF" missing TrackDef